Panasonic Wv Nm100 Operating Instructions Manual

31
The time on the browser will be displayed as hours
and minutes (00:00), though you can set hours, min-
utes and seconds in Time setup.
! Important
Click the [Setup] button.
The login window will appear when you press
the [Camera Control] button or the [Setup]
button on the “Top Menu” page for the first
time. The default settings for user name and
password are as follows.
User name: admin
Password: password
Change the default password for security.
! Important
STEP3
The Top Menu page appears.
The Basic...

32
BROWSING PICTURES
If the setup has been completed, you can browse through the pictures on the camera.
The pictures of the camera can be displayed as still pictures or motion pictures.
Displaying multiple pictures of multiple cameras on a screen is also possible.
To display multiple pictures of multiple cameras on a screen, refer to page 36.
Monitoring a Still Picture of a Single Camera
Set as follows to monitor a still picture (JPEG) of a single camera.
Preparations
The setting for still pictures can...

33
Begin the operation from the Basic setup page.
The Control page appears and the still picture of the cam-
era is displayed. Operation buttons are displayed below the
still picture.
Screenshot 2
Screenshot 1
How to operate
If the preparations have been completed, you can begin the operation from the Basic setup page.
Click the Control button.
STEP1
Operate the camera and adjust the picture.
Panning and tilting
Click the arrow buttons (up / down / right / left)
to adjust the horizontal and vertical...

34
BROWSING PICTURES
Monitoring the Motion Picture of a Single Camera
Set as follows to monitor the motion picture (MPEG-4) of a single camera.
•To monitor the motion picture of a camera, installation of the plug-in is required.
For further information, refer to page 29.
•You may have problems browsing motion pictures depending on the bandwidth of the network to which the cam-
era is connected. In this case, perform the setting of “Bandwidth control” on the “Operation mode” page of
“Advanced setup”. For...

35
Begin the operation from the Basic setup page.
The Control page appears. The motion picture of the cam-
era is displayed.
Screenshot 2
Screenshot 1
To display the motion picture of the selected
camera, click the [Live-ON] button.
To quit displaying the motion picture of the
selected camera, click the [STOP] button. The
motion picture disappears.
On this page, you can also operate the camera
and adjust the motion picture.
Panning and tilting
Click the arrow buttons (up / down / right / left)
to adjust...

36
BROWSING PICTURES
Monitoring Still Pictures of Multiple Cameras
You can monitor pictures of multiple cameras on a single monitor screen (multi-screen) simultaneously.
You can display multiple camera pictures from up to four cameras on a single monitor screen.
To monitor camera pictures on the multi-screen, registration of the cameras to be monitored on the multi-screen is
required.
You can register up to eight cameras as two groups by registering four cameras in each group.
•Only still pictures (JPEG)...

37
The Operation mode page of Advanced setup appears.
The Multi-screen page appears.
Screenshot 3
Screenshot 2
Set the IP addresses of the cameras to be mon-
itored on the multi-screen.
You can register up to eight cameras as two
groups by registering four cameras in each
group.
Camera 1 – Camera 4 are registered as Group
A, and Camera 5 – Camera 8 are registered as
Group B.
Click the [SET] button after completing the set-
ting.
STEP6
STEP5
Click the [Multi-screen] button.
STEP4 

38
BROWSING PICTURES
Begin the operation from the Multi-screen page.
The Control page appears. The still picture of the camera is
displayed.
The camera pictures are displayed on the quad screen.
Screenshot 3
Screenshot 2
Screenshot 1
If five cameras or more are connected, the next
multi-screen will be displayed by pressing the
[Group B] button.
STEP3
Click the [Quad screen] button.
STEP2
Click the [Control] button in the top left corner.
STEP1
How to Operate
If the settings of “Multi-screen” have been...

39
Monitoring the Picture of a Camera in a Preset Position
You can monitor both the still picture and the motion picture of a camera installed in a place registered as a preset
position.
To monitor the image of the camera in a preset position, adjusting the position of the camera (horizontal and vertical
position) and registering the shooting location, as a preset position is required in advance.
Registration of a preset position
Begin to register a preset position of the camera.
Register the preset...

40
BROWSING PICTURES
How to Operate
Monitor the picture of the camera in a preset position.
First, select whether a still picture or a motion picture is to be monitored in a preset position on the Basic setup
page. Refer to page 24 and 25 to display the Basic setup page.
Begin the operation from the Basic setup page.
The Control page appears.
(This screenshot is displayed when you choose a still picture to
be monitored in a preset position.)
The picture of the camera in the selected preset position...