Panasonic Wv Nm100 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Wv Nm100 Operating Instructions Manual. The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 61
![Page 61
61
The [Host authentication] tab appears.
The User authentication page appears.
Screenshot 4
Screenshot 3
Click the [User authentication] tab.
STEP3
Begin the setting for the user authentication.
User authentication
Select ON or OFF to set whether to authenti-
cate users or not.
User name
Enter a user name of up to 32 characters.
Password/ Retype Password
Enter a password for the user of at least 8 and
no more than 32 characters.
Access level
Select an access level from the following:
Administrator /...](http://img.usermanuals.tech/thumb/58/68503/w300_wv-nm100_en_om_d-60.png "Page 61
61
The [Host authentication] tab appears.
The User authentication page appears.
Screenshot 4
Screenshot 3
Click the [User authentication] tab.
STEP3
Begin the setting for the user authentication.
User authentication
Select ON or OFF to set whether to authenti-
cate users or not.
User name
Enter a user name of up to 32 characters.
Password/ Retype Password
Enter a password for the user of at least 8 and
no more than 32 characters.
Access level
Select an access level from the following:
Administrator /...")
61 The [Host authentication] tab appears. The User authentication page appears. Screenshot 4 Screenshot 3 Click the [User authentication] tab. STEP3 Begin the setting for the user authentication. User authentication Select ON or OFF to set whether to authenti- cate users or not. User name Enter a user name of up to 32 characters. Password/ Retype Password Enter a password for the user of at least 8 and no more than 32 characters. Access level Select an access level from the following: Administrator /...
Page 62
![Page 62
62
ADVANCED SETTINGS
System Settings
Begin the setting for the system such as date setting, naming the cameras, etc.
The setting is made on the System page.
Begin the operation from the Basic setup page.
Refer to page 24 and 25 to display the Basic setup page.
The Operation mode page of Advanced setup appears.
Screenshot 2
Screenshot 1
Click the [Advanced setup] button.
STEP1
Click the [System] button.
STEP2](http://img.usermanuals.tech/thumb/58/68503/w300_wv-nm100_en_om_d-61.png "Page 62
62
ADVANCED SETTINGS
System Settings
Begin the setting for the system such as date setting, naming the cameras, etc.
The setting is made on the System page.
Begin the operation from the Basic setup page.
Refer to page 24 and 25 to display the Basic setup page.
The Operation mode page of Advanced setup appears.
Screenshot 2
Screenshot 1
Click the [Advanced setup] button.
STEP1
Click the [System] button.
STEP2")
62 ADVANCED SETTINGS System Settings Begin the setting for the system such as date setting, naming the cameras, etc. The setting is made on the System page. Begin the operation from the Basic setup page. Refer to page 24 and 25 to display the Basic setup page. The Operation mode page of Advanced setup appears. Screenshot 2 Screenshot 1 Click the [Advanced setup] button. STEP1 Click the [System] button. STEP2
Page 63
![Page 63
63
The System page appears.
Screenshot 3
Set the items on the System page.
For details about the items, refer below.
Click the [SET] button after completing the set-
ting.
STEP4
STEP3
Setting items
System
Time adjustment
Select a standard for the time adjustment.
Manual setup: Adjust the time manually.
Synchronization with NTP server: Time is adjust-
ed automatically based on the NTP server.
Time setup (year-month-day hour:min:sec)
Enter year, month, date, hour, minute, and second if
Manual setup is...](http://img.usermanuals.tech/thumb/58/68503/w300_wv-nm100_en_om_d-62.png "Page 63
63
The System page appears.
Screenshot 3
Set the items on the System page.
For details about the items, refer below.
Click the [SET] button after completing the set-
ting.
STEP4
STEP3
Setting items
System
Time adjustment
Select a standard for the time adjustment.
Manual setup: Adjust the time manually.
Synchronization with NTP server: Time is adjust-
ed automatically based on the NTP server.
Time setup (year-month-day hour:min:sec)
Enter year, month, date, hour, minute, and second if
Manual setup is...")
63 The System page appears. Screenshot 3 Set the items on the System page. For details about the items, refer below. Click the [SET] button after completing the set- ting. STEP4 STEP3 Setting items System Time adjustment Select a standard for the time adjustment. Manual setup: Adjust the time manually. Synchronization with NTP server: Time is adjust- ed automatically based on the NTP server. Time setup (year-month-day hour:min:sec) Enter year, month, date, hour, minute, and second if Manual setup is...
Page 64
64 ADVANCED SETTINGS •If the setting item is overlapped between Basic setup and Advanced setup, the latest setting has priority. For example, if a different setting is made on the Operation mode page after the same item has been set on the Basic setup page, the setting made on the Operation mode page is valid. •When using the DDNS function, select ON for DNS in the “Network” page (refer to page 28), and be sure to set the IP address of the DNS server. ! Important DDNS Setup DDNS (Dynamic Domain Name...
Page 65
![Page 65
65
SNMP Settings
Begin the setting for SNMP (Simple Network Management Protocol): community name, equipment name, location,
and e-mail address/telephone number.
These parameters are required to when you connect to the administrative software (SNMP manager).
The setting is made on the “SNMP” page.
Begin the operation from the “System” page.
Refer to page 62 and 63 to display the “System” page.
The “SNMP” page appears.
Screenshot 2
Screenshot 1
Click on the [SNMP] tab on the “System” page.
STEP1
Set the...](http://img.usermanuals.tech/thumb/58/68503/w300_wv-nm100_en_om_d-64.png "Page 65
65
SNMP Settings
Begin the setting for SNMP (Simple Network Management Protocol): community name, equipment name, location,
and e-mail address/telephone number.
These parameters are required to when you connect to the administrative software (SNMP manager).
The setting is made on the “SNMP” page.
Begin the operation from the “System” page.
Refer to page 62 and 63 to display the “System” page.
The “SNMP” page appears.
Screenshot 2
Screenshot 1
Click on the [SNMP] tab on the “System” page.
STEP1
Set the...")
65 SNMP Settings Begin the setting for SNMP (Simple Network Management Protocol): community name, equipment name, location, and e-mail address/telephone number. These parameters are required to when you connect to the administrative software (SNMP manager). The setting is made on the “SNMP” page. Begin the operation from the “System” page. Refer to page 62 and 63 to display the “System” page. The “SNMP” page appears. Screenshot 2 Screenshot 1 Click on the [SNMP] tab on the “System” page. STEP1 Set the...
Page 66
![Page 66
66
ADVANCED SETTINGS
Setting items
“Community name”
Enter the name of the community to be monitored.
This name must be coincident with the community
name of SNMP.
Characters for “Community name”
1 to 32 characters (ABCDEFGHIJKLMNOPQRSTU
VWXYZabcdefghijklmnopqrstuvwxyz0123456789!#$
%’()=~|`{}?_-^[]/@*,.:;+\)
Default setting for “Community name”:public
“Equipment name”
Enter the same name as “Camera name” on the
“Basic Setup” page. (Refer to page 31.)
Characters for “Equipment name”
1 to 32 characters...](http://img.usermanuals.tech/thumb/58/68503/w300_wv-nm100_en_om_d-65.png "Page 66
66
ADVANCED SETTINGS
Setting items
“Community name”
Enter the name of the community to be monitored.
This name must be coincident with the community
name of SNMP.
Characters for “Community name”
1 to 32 characters (ABCDEFGHIJKLMNOPQRSTU
VWXYZabcdefghijklmnopqrstuvwxyz0123456789!#$
%’()=~|`{}?_-^[]/@*,.:;+\)
Default setting for “Community name”:public
“Equipment name”
Enter the same name as “Camera name” on the
“Basic Setup” page. (Refer to page 31.)
Characters for “Equipment name”
1 to 32 characters...")
66
ADVANCED SETTINGS
Setting items
“Community name”
Enter the name of the community to be monitored.
This name must be coincident with the community
name of SNMP.
Characters for “Community name”
1 to 32 characters (ABCDEFGHIJKLMNOPQRSTU
VWXYZabcdefghijklmnopqrstuvwxyz0123456789!#$
%’()=~|`{}?_-^[]/@*,.:;+\)
Default setting for “Community name”:public
“Equipment name”
Enter the same name as “Camera name” on the
“Basic Setup” page. (Refer to page 31.)
Characters for “Equipment name”
1 to 32 characters...
Page 67
![Page 67
67
You can refer to the Help page for details about the
items.
The Help page below appears by clicking the [Help]
button.
You can display an explanation by clicking on the
desired item.
USING HELP
You can upgrade the firmware of the camera to the latest version.
Refer to the dealer whether the firmware upgrade is available.
Before upgrading the firmware, save the current firmware onto the hard drive of the PC.
Start up the browser and enter the following: http://xxx.yyy.zzz.nnn/admin/upload.html...](http://img.usermanuals.tech/thumb/58/68503/w300_wv-nm100_en_om_d-66.png "Page 67
67
You can refer to the Help page for details about the
items.
The Help page below appears by clicking the [Help]
button.
You can display an explanation by clicking on the
desired item.
USING HELP
You can upgrade the firmware of the camera to the latest version.
Refer to the dealer whether the firmware upgrade is available.
Before upgrading the firmware, save the current firmware onto the hard drive of the PC.
Start up the browser and enter the following: http://xxx.yyy.zzz.nnn/admin/upload.html...")
67 You can refer to the Help page for details about the items. The Help page below appears by clicking the [Help] button. You can display an explanation by clicking on the desired item. USING HELP You can upgrade the firmware of the camera to the latest version. Refer to the dealer whether the firmware upgrade is available. Before upgrading the firmware, save the current firmware onto the hard drive of the PC. Start up the browser and enter the following: http://xxx.yyy.zzz.nnn/admin/upload.html...
Page 68
68 TROUBLESHOOTING Before asking for repairs, please check the following symptoms. If the solutions below do not solve the problem or the symptom is not listed below, ask at the shop where you pur- chased the camera. SymptomPossible cause / Possible solutionReference page 10 10 Cannot access from the browser.•Is the category 5 cable connected to the Ethernet connector inside the connector cover of the camera? •Is the link LED next to the Ethernet connector lit? If the link LED is not lit, it is possible...
Page 69
69 The picture is not refreshed. Cannot access from the browser •Depending on the traffic of the network or the con- centration of access to the camera, there might be difficulties displaying the camera picture. Click the reload button of the browser to request the camera picture to be refreshed. SymptomPossible cause / Possible solutionReference page – •Is the same IP address assigned to other devices? Are there contradictions between the address and the network subnet to be accessed? If the camera and...
Page 70
70 TROUBLESHOOTING The live picture is not renewed / the alarm picture is not renewed. •The power cord or the plug is damaged. If you continue to use it, a fire or an electric shock may occur. Unplug the AC adapter immediately, and refer servicing to qualified service personnel. SymptomPossible cause / Possible solution Inspect the power cord and the plug of the AC adapter occasionally. SymptomPossible cause / Possible solutionReference page – •Since the data has been recalled from the cache of the PC,...