Panasonic Wv Nm100 Operating Instructions Manual

51
Transferring Pictures to the Server at Designated Intervals
Set the interval time to transfer pictures to the server at designated intervals.
The setting can be made on the FTP client page of Alarm&Transmission. Refer to page 49 and 50 to display the
FTP client page of Alarm&Transmission.
Set the items for Non alarm transmission
setup.
Non alarm transmission
Check ON.
You can select ON or OFF to set whether to
transfer the picture at designated intervals or
not.
Directory
Enter the directory where the...

52
TRANSFERRING PICTURES TO THE SERVER
Transferring Pictures to the Server when Motion is Detected 
Set for the pictures of the motion detection area to be transferred to the server when motion is detected by the
motion detector function. The settings can be made on the FTP client page of Alarm&Transmission. Refer to
page 49 and 50 to display the FTP client page of Alarm&Transmission.
Set the items for Alarm transmission setup.
Alarm transmission
Check ON.
You can select ON or OFF to set whether to...

53
OTHER FUNCTIONS
Alarm Connector and AUX Output Connector
Security door 
sensor
Alarm input connector
Ground terminal
Alarm input
Alarm output connector
AUX output connector
(To control external devices: 
for example, lighting ON and OFF) 
Customizing the Contents of the Alarm Mail
You can customize the contents of the alarm mail notifying that an alarm has occurred and the alarm date and time.
To customize them, do the following:
Create the contents of the alarm mail with a text editor and save the...

54
ADVANCED SETTINGS
This section explains the advanced settings for the quality of the pictures, the user authentication, etc.
Advanced Settings for Operation mode
Set the Operation mode (JPEG / MPEG-4) in more detail than in the Basic setup.
The advanced setting can be made on the Operation mode page of Advanced setup.
Begin the operation from the Basic setup page.
Refer to page 24 and 25 to display the Basic setup page.
The Operation mode page of Advanced setup appears.
(When “JPEG” is selected)...

55
Setting items
•If the setting item is overlapped between Basic setup and Advanced setup, the latest setting has priority.
For example, if a different setting is made on the Operation mode page after the same item has been set on
the Basic setup page, the setting made on the Operation mode page is valid.
•You may have problems browsing still/motion pictures depending on the bandwidth of the network to which the
camera is connected. In this case, perform the setting of “Bandwidth control” on the...

56
ADVANCED SETTINGS
Adjusting the Picture
Adjust the picture in detail.
The adjustment can be made on the Image adjustment page of Advanced setup.
Begin the operation from the Basic setup page.
Refer to page 24 and 25 to display the Basic setup page.
The Operation mode page of Advanced setup appears.
Screenshot 2
Screenshot 1
Click the [Advanced setup] button.
STEP1
Click the [Image adjustment] tab.
STEP2 

57
The Image adjustment page of Advanced setup appears.
Screenshot 3
Set and adjust the picture in detail.
Brightness
Adjust the brightness level of the picture (seven-
teen levels from -8 to 8). When the number
is decreased, the picture gets darker. When the
number is increased, the picture gets brighter.
White balance
Select AUTO or HOLD to adjust the white
balance.
AUTO:The white balance is adjusted
automatically.
HOLD:The white balance is fixed.
Sharpness
Adjust the sharpness level of the picture...

58
ADVANCED SETTINGS
Settings for the Host Authentication
Begin the setting for the host authentication.
You can set a double authentication for the operation of the camera.
One is the host authentication and the other is the user authentication.
The host authentication checks if an IP address of a PC accessing the camera is registered as a host or not.
Up to eight PCs can be registered for the host authentication.
The setting of the host authentication is made on the Host authentication page.
Begin the...

59
The Host authentication page appears.
Screenshot 3
Begin the setting for the host authentication.
Host authentication
Select ON or OFF to set whether to authenti-
cate hosts or not.
Host address
Enter the IP address of the PC to be authenti-
cated.
Access level
Select an access level from the following:
Administrator / Camera control / Live viewing
Administrator: Authorized to operate all
functions of the camera
Camera control:Authorized to monitor
the picture and operate on the Alarm log
list page...

60
ADVANCED SETTINGS
Settings for the User Authentication
Begin the setting for the user authentication.
You can set a double authentication for the operation of the camera.
One is the host authentication and the other is the user authentication.
The user authentication requires users to enter a user name and a password to access the camera if a PC access-
ing the camera is not registered for the host authentication.
Up to sixteen users can be registered for the user authentication.
The setting of the...