Panasonic Wma Mp3 Cd Player Receiver Cq C5403u Operating Instructions

							21
1
E
N
G
L
I
S
H
CQ-C5403U/C5303U
20
Root Folder
(Root Directory)
Folder Selection
File Selection
Tree 1 Tree 2 Tree 3 Tree 4 Tree 8
(Max.)
2 1
34q
q we
r
t
yy
5
6
8
18
7–In the order
–In the order
¡You are recommended to minimize the chances of
making a disc that contains both CD-DA files and
MP3/WMA files.
¡If CD-DA files are on the same disc as MP3 or WMA
files, the songs may not play in the intended order, or
some songs may not play at all.
¡When storing MP3 data and WMA data on the same
disc, use different folders for each data.
¡Do not record files other than MP3/WMA files and unneces-
sary folder on a disc.
¡The name of an MP3/WMA file should be added by rules as
shown in the following descriptions and also comply with the
rules of each file system.
¡The file extension “.mp3” or “.wma” should be assigned to
each file depending on the file format.
¡You may encounter trouble in playing MP3/WMA files or dis-
playing the information of MP3/WMA files recorded with cer-
tain writing software or CD recorders.
¡This unit does not have a play list function.
¡Although Multi-session recording is supported, the use of
Disc-at-Once is recommended.
Supported file systems
ISO 9660 Level 1/Level 2, Apple Extension to ISO 9660, Joliet,
Romeo
Note: 
¡Apple HFS, UDF 1.50, Mix CD and CD Extra are not supported.
Recording MP3/WMA files on a CD-media
Folder selection order/file playback order
Maximum number of files/folders
¡Maximum number of files/folders: 511 (files + folders)
¡Maximum number of files in one folder: 255
¡Maximum depth of trees: 8
¡Maximum number of folders: 255 (Root folder is included.)
Note:
¡You can shorten the duration between data read and playback by
decreasing the quantity of files or folders, or the depth of the hierar-
chy.
¡This unit counts the number of folders irrespective of the presence or
absence of an MP3/WMA file.
¡If the selected folder does not contain any MP3/WMA files, the near-
est MP3/WMA files in the order of playback will be played.
¡Playback order may be different from other MP3/WMA players even if
the same disc is used.
¡“ROOT” appears when displaying the root folder name.Copyright
It is prohibited by copyright laws to copy, distribute and
deliver copyrighted materials such as music without the
approval of copyright holder except enjoying yourself
personally.
No warranty
Above description complies with our investigations as of
December 2005. It has no warranty for reproducibility
and displayability of MP3/WMA.
Recording MP3/WMA files on a CD-media
32, 44.1, 48 kHz Yes 32 k – 192 kbps Windows Media Audio Ver. 2, 7, 8, 9*16, 22.05, 24 kHz Yes 8 k – 160 kbps MPEG 2 audio layer 3 (MP3)32, 44.1, 48 kHz Yes 32 k – 320 kbps MPEG 1 audio layer 3 (MP3)Sampling frequency VBR Bit rate Compression method
Compression formats (Recommendation:“Points to remember when making MP3/WMA files” on the previous page)
* WMA 9 Professional/LossLess/Voice are not supported. 
						

							22
21
E
N
G
L
I
S
H
CQ-C5403U/C5303U
Audio Settings
SQ Adjustment
You can adjust the characteristics of the currently selected
sound type (SQ). (aPage 11)
It is also possible to preset up to 5 different adjusted SQs.
Tone/SQ adjustable range: –12 dB to +12 dB (by 2 dB)
SQ Low/Bass : ± 12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz)
SQ Mid : ± 12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz)
SQ High/Treble : ± 12 dB (at 10 kHz, 12 kHz, 15 kHz, 18 kHz)
¡The bass/treble control level of each frequency is fixed to the
frequency that has been selected for SQ.
FTo return an adjusted SQ to the default setting
q Press [SQ], and select the SQ which is to be returned to
the default setting. (Only for main unit)
wPress and hold [BAND]for more than 2 seconds.
Bass/Treble
You can adjust the bass and treble sounds.
Default: BAS (bass) 0 dB
TRE (treble) 0 dB
Setting range: –12 dB to +12 dB (by 2 dB)Press[VOLUME] (PUSH SEL).
Press[VOLUME] (PUSH SEL).
Press[VOLUME] (PUSH SEL).
The SQ adjustment mode can be
established also by pressing [SQ]
for more than 2 seconds.
Volume
Default: 18
Setting range: 0  to 40
Press [VOLUME] (PUSH SEL)
to open the menu.
[D] (DISP) (Return to the regular mode)
Press [VOLUME]
(PUSH SEL: select).
(Press [SEL]on the
remote control unit.) Turn [VOLUME].(Press[VOL 
}]or
[VOL 
{]on the remote control unit.)
[SQ](Sound Quality)
[
[]/[
]]
[
{] / [}] 
[BAND]
Preset Buttons [2] to [6]
(Page 24) 
						

							23
1
E
N
G
L
I
S
H
CQ-C5403U/C5303U
22
qw
qw
qw
qw
Turn [VOLUME].
q: Up
w: Down Turn [VOLUME].
q: Up
w: Down
Note:
¡You cannot save
any SQ presetting
value in [1] button.
¡Any SQ adjust-
ments will not
change the call up
screen names such
as ROCK and JAZZ.Turn [VOLUME].
q: Up
w: Down Note:
¡The sequence and contents of setting items may depend on the conditions of devices to be connected. For further
information, refer to the System Upgrade Guidebookor the instruction manuals for the devices to be connected.
¡To return to the regular mode, press [D] (DISP).
¡If no operation takes place for more than 5 seconds in audio setting (2 seconds in the volume adjustment, 10 sec-
onds in the SQ adjustment), the display returns to the regular mode.
¡The volume can also be adjusted directly using [VOLUME]on the main unit. (aPage 10)
¡Please refer to page 11 for calling up a preset SQ.
VOLUMEBASS
SUBW LPFSUBW LEVFADER
SQ SET
Regular modeTREBLE
BALANCE
qPress [
[]
or [
]] 
to select a frequency
band (Low, Mid, High). 
[
[]
: Higher frequency band
[
]]
: Lower frequency band
Turn [VOLUME] 
to select a frequency.
q: Higher frequency
w: Lower frequency
wPress [
}]
or [
{]
to adjust the level.
[}]: Up
[{]: Down
ePress and hold one of the preset buttons
from [2]to [6] for more than 2 seconds.
¡The adjusted SQ is preset in the num-
ber of the selected button, and return
to the regular mode resumes.
¡When you suspend the SQ preset adjustment, each level remains your recent
adjustment until a new SQ presetting operation is performed or you call up
the SQ preset.Level
The selected frequency band
blinks.
Frequency 
						

							24
23
E
N
G
L
I
S
H
CQ-C5403U/C5303U
Balance/Fader
You can adjust the sound level among the right, left, front and
rear speakers.
Default: BAL (balance) CNT (center)
FAD (fader) CNT (center)
Setting range: 15 levels each and CNT (center)Press[VOLUME] (PUSH SEL).
Press[VOLUME] (PUSH SEL).
Subwoofer LPF (Low Pass Filter)
You can select the upper limit frequency of the sound from sub-
woofer.
Default: 80 Hz
Setting range: 80 Hz, 120 HzPress[VOLUME] (PUSH SEL).
Subwoofer Level
You can change the subwoofer volume level.
Default: 0
Setting range: MUTE (–∞), – 6 dB  to + 6 dB  (by 2 dB)Press [VOLUME] (PUSH SEL).
[D] (DISP) (Return to the regular mode)
Press [VOLUME]
(PUSH SEL: select).
(Press [SEL]on the
remote control unit.)
Audio Settings (continued)
Turn [VOLUME].(Press[VOL }]or
[VOL 
{]on the remote control unit.)
Regular mode 
						

							25
24
E
N
G
L
I
S
H
CQ-C5403U/C5303U
qw
qw
Turn [VOLUME].
q: Front enhanced
w: Rear enhanced Turn [VOLUME].
q: Right enhanced
w: Left enhanced
qw
qw
Turn [VOLUME].
q: 120 Hz
w: 80 Hz Turn [VOLUME].
q: Up
w: Down Note:
¡The sequence and contents of setting items may depend on the conditions of devices to be connected. For further
information, refer to the System Upgrade Guidebookor the instruction manuals for the devices to be connected.
¡To return to the regular mode, press [D] (DISP).
¡If no operation takes place for more than 5 seconds in audio setting, the display returns to the regular mode.
¡Adjustments of the subwoofer level and low pass filter are effective when the subwoofer is connected.
VOLUMEBASS
SUBW LPFSUBW LEVFADER
SQ SET
Regular modeTREBLE
BALANCE 
						

							26
25
E
N
G
L
I
S
H
CQ-C5403U/C5303U
Function Settings
Demonstration
You can set up the monitor to display or hide the demonstration
screen.
Default: ON
Press and hold [VOLUME]
(PUSH SEL)
for more than 2 sec-
onds 
to open the menu.
[D] (DISP) (Return to the regular mode)
Press and hold
[VOLUME] (PUSH
SEL: select)for more
than 2 seconds. (Press
and hold [SEL]
(MENU)for more
than 2 seconds on the
remote control unit.)
Dimmer (display brightness setting)
You can adjust the display brightness.
Default: DIMMER 3
Variety: DIMMER 1 – 3Press[VOLUME] (PUSH SEL).
Spectrum Analyzer Display Patterns
(PATTERN)
Default: Pattern 1
Variety: 6 types, OFF
Press[VOLUME] (PUSH SEL).
Mute/Attenuation
You can select mute or attenuation. (aPage 10)
Default: MUTE
Press[VOLUME] (PUSH SEL).
(Page 28) Turn [VOLUME].(Press[8] (
})or [0] ({)
on the remote control unit.) 
						

							27
1
E
N
G
L
I
S
H
CQ-C5403U/C5303U
26
Note:
¡The sequence and contents of setting items may depend on the conditions of devices to be connected. For further infor-
mation, refer to the System Upgrade Guidebookor the instruction manuals for the devices to be connected.
¡To return to the regular mode, press [D] (DISP).
¡If no operation takes place for more than 5 seconds in function setting, the display returns to the regular mode.
Turn [VOLUME]
.
q: On (Default)
w: Off
Note:
¡Button operation with either the main unit or remote control allows users to can-
cel the demonstration screen for 20 seconds and enable the selected operation
even in the demo-on mode.
PATTERNDEMORegular modeDIMMER
AUX1 INMUTE KEYSECURITY
qw
Turn [VOLUME]
.
: Darker
: Medium
: Brighter (Default)
qwq w
Turn [VOLUME]
.
: Off
: Pattern 1 (Default)
: Pattern 6
qwq w
Turn [VOLUME]
.
q: 10 steps decrease (Attenuation)
w: No sound (Mute) (Default)
qw 
						

							28
27
E
N
G
L
I
S
H
CQ-C5403U/C5303U
Function Settings (continued)
[D] (DISP) (Return to the regular mode)
Press and hold
[VOLUME] (PUSH
SEL: select)for more
than 2 seconds. (Press
and hold [SEL]
(MENU)for more
than 2 seconds on the
remote control unit.)
AUX Skip
If AUX1 is not used, the AUX mode is skipped when selecting the
source.
Default: ON (Skip disabled)Press[VOLUME] (PUSH SEL).
Security Function
You can activate the anti-theft function when leaving your car.
Default: ON
Press[VOLUME] (PUSH SEL).
(Page 26) Turn [VOLUME].(Press[8] (
})or [0] ({)
on the remote control unit.) 
						

							29
28
E
N
G
L
I
S
H
CQ-C5403U/C5303U
Note:
¡The sequence and contents of setting items may depend on the conditions of devices to be connected. For further infor-
mation, refer to the System Upgrade Guidebookor the instruction manuals for the devices to be connected.
¡To return to the regular mode, press [D] (DISP).
¡If no operation takes place for more than 5 seconds in function setting, the display returns to the regular mode.
Turn [VOLUME]
.
q: Skip disabled (Default)
w: Skip enabled 
Turn [VOLUME]
.
qThe security function is activated. (Default)
wThe security function is not activated.
SLED (Security Light Emitted Diode) ON
When the ignition switch is turned OFF...
¡The security message will be displayed.
¡The face plate removal alarm will be active. 
(
aPage 30)
When the face plate is removed...
¡The security indicator (SLED) blinks. (
aPage 30)
PATTERNDEMORegular modeDIMMER
AUX1 INMUTE KEYSECURITY
qw
qw 
						

							30
29
E
N
G
L
I
S
H
CQ-C5403U/C5303U
Caution
¡This face plate is not waterproof. Do not expose it to water or excessive moisture.
¡Do not remove the face plate while driving your car.
¡Do not place the face plate on the dashboard or nearby areas where the temperature rises high.
¡Do not touch the contacts on the face plate and on the main unit, since this may result in poor electrical contact.
¡If dirt or other foreign substances get on the contacts, wipe them off with a clean and dry cloth.
¡To avoid damaging the face plate, do not push it down or place objects on it while it is open.
¡The face plate will automatically close about 5 seconds after [](release) is pressed while the face plate is tilted
or open, so take care to ensure that your fingers will not be pinched by the closing face plate.
Security Indicator (SLED)
SLED blinks when the face plate is removed from the unit. 
This function is activated when the Security Function is ON.
(
aPage 28)
Face Plate Removal Alarm
This alarm sounds to warn you not to forget to remove the
face plate before leaving your car. 
This function is activated when the Security Function is ON.
(
aPage 28)
Anti-Theft System
SLED
1
2
This unit is equipped with a removable face plate. Removing
this face plate makes the unit totally inoperable. SLED will
blink.
Remove the Face Plate
qSwitch off the power of the unit.
wPress [](release) to remove the face plate. (The face
plate disengages with a click when it is removed.)
e
Place the face plate into the case and take it with you when
you leave the car.
Note:
¡Be absolutely sure to turn off the power of the unit before
removing the face plate.
¡Do not install or remove the face plate while it is moving.
Install the Face Plate
qSlide the left side of the face plate in place.
wPress the right end of the face plate until a “click” is heard.Removable
Face Plate
Case
Contact
Contact
[]
(Release)