Panasonic Wireless Camera, Monitoring System Bl-wv10a Operating Instructions

15 Error Messages
[For assistance, please call: 1-800-272-7033] 141
Standard Operation Mode Error Messages
Error MessageCauses and Solutions
Incorrect  security  code. This error is displayed if the security code entered 
to enter the [General Setup] or [Camera Setup] 
screens in incorrect.
• Enter the correct security code. If you've 
forgotten it, press the FACTORY DEFAULT 
RESET button to reset the device and re-
register the camera using Quick Setup.
Cannot connect
to camera.This error is...

15 Error Messages
142
The timer could not be set 
because the recording 
start and end time are the 
same. Set a different start 
or end time.This error is displayed if the start and end times 
during Timer Recording Setup are identical.
• There must be a difference of at least one 
minute between start and end times.
The timer could not be set 
because the recording 
time overlaps with another 
timer. Set a different start 
and/or end time.This error is displayed during Timer Recording 
Setup if the day...

15 Error Messages
[For assistance, please call: 1-800-272-7033] 143
This sensor is used for 
timer recording.
Set Sensor Alert to [-] on 
the [Camera Sensors] 
screen.This error appears when you attempt to disable a 
remote camera's sensor when that camera has 
been set for Sensor Alert.
• Turn off Sensor Alert in the Sensor Alert 
Camera Settings.
This error may also appear when you attempt to 
erase a camera that has been set for Sensor 
Alert.
• Turn off Sensor Alert in the Sensor Alert 
Camera...

15 Error Messages
144
Automatic Display Mode Error MessagesThis camera is used for 
timer recording.
Turn off the record 
program.This error appears when you attempt to erase a 
camera being used for a timer recording. 
• Erase the timer recording settings.
This camera is used for 
sensor recording.
This camera is used for 
timer recording.
Turn off the record 
program.This error appears when you attempt to erase a 
camera being set for continuous sensor recording 
or set for timer recording. 
• Deselect...

15 Error Messages
[For assistance, please call: 1-800-272-7033] 145
SD Memory Card Error Messages
Error MessageCauses and Solutions
Sequential Display mode 
is active.
Set mode switch on back 
of unit to [NORMAL], then 
turn unit off/on.This error is displayed when the remote control is 
used during Automatic Display Mode.
• Set the mode switch on the back of the device 
to Normal and turn the power on again.
Error MessageCauses and Solutions
SD Memory Card is 
locked.
Unlock the SD Memory 
Card and try...

15 Error Messages
146
Error Messages from the Basic Setup and Setup Screens
Error MessageCauses and Solutions
Enter at least 6 
characters.
Do you want to go back 
and try again?This error appears when you attempt to use 6 or 
fewer characters to register an administrator 
name, password, FTP account or FTP password.
• Select [Yes] to return to the text panel or 
select [No] to stop inputting text.
The user name and 
password must be 
different.
Do you want to go back 
and try again?This error appears...

15 Error Messages
[For assistance, please call: 1-800-272-7033] 147
Use only hexadecimal 
characters
(0-9, A-F, a-f).
Do you want to go back 
and try again?This error appears when invalid characters are 
used in the encryption keys 1 to 4 setting.
• Select [Yes] to return to the text panel or 
select [No] to stop inputting text.
Enter a key matching the 
length determined by the 
key type.
Do you want to go back 
and try again?This error appears when the length of an entered 
encryption key does not...

16 Troubleshooting the BL-WV10A
148
16 Troubleshooting the BL-WV10A
16.1 Common Issues
16.2 Television Screen and Images
IssueCauses and Solutions
The unit doesn’t turn on. Is it plugged in correctly?
The remote control 
doesn't work.Are the batteries good and installed correctly?
Is the remote control receptor in direct sunlight?
Is there an obstruction (including colored glass in a 
rack door) between the remote control and the 
receptor?
Is the mode switch on the back of the BL-WV10A set 
to [SEQ....

16 Troubleshooting the BL-WV10A
[For assistance, please call: 1-800-272-7033] 149
16.3 Recording
The following is displayed:
[There is a problem with 
the unit. Please note the 
error code below and 
contact a Panasonic 
service center for 
servicing.Remove the power cord from the AC adaptor and 
re-insert it.
• If this doesn't resolve the problem, note the 
error code shown on the screen and contact 
your dealer.
The image appears 
stretched horizontally
The image size is odd.Adjust the TV's...

16 Troubleshooting the BL-WV10A
150
16.4 Timer Recording
16.5 SD Memory Cards
IssueCauses and Solutions
Timer recording doesn't 
work.Are the timer settings correct?
Is the timer indicator lit?
Turn on the timer indicator by pressing the 
[TIMER] button on the remote control.
Is the time set correctly?
Timer recording doesn't 
stop even when I press 
[STOP].To stop timer recording, press [TIMER] on the 
remote control.
IssueCauses and Solutions
I cannot format the card. Is the SD memory card...