Panasonic Wireless Camera, Monitoring System Bl-wv10a Operating Instructions

9 Resetting the BL-WV10A
[For assistance, please call: 1-800-272-7033] 131
9 Resetting the BL-WV10A
Press the FACTORY DEFAULT RESET button to return to default settings. You will 
no longer be able to connect to the camera. After returning to default settings, you 
will need to re-do the settings completely.
1.While the BL-WV10A is turned on, set the mode switch on the back to Setup.
2.Press and hold the FACTORY DEFAULT RESET button for 3 seconds and 
then release it.
• The reset will be complete after...

10 Adding Cameras
132
10 Adding Cameras
For BL-C10A and BL-C30A users, the camera’s firmware must be version 1.22 or 
higher in order to function properly with the BL-WV10A.
For HCM series camera users, the camera’s firmware must be version 1.08 or 
higher in order to function properly with the BL-WV10A.
For the latest firmware, visit http://panasonic.co.jp/pcc/products/en/netwkcam/
Refer to the Operating Instructions included with your camera for information on 
confirming the firmware version of your...

10 Adding Cameras
[For assistance, please call: 1-800-272-7033] 133
• When registration is complete, the buzzer will sound and the wireless 
indicator will flash once for each of the cameras registered.
• The Quick Setup screen will appear differently based on the network on 
which it is used.
• The camera can also be registered manually (see page 105). However, 
any additional cameras will be registered as remote cameras.
Note
• To add more cameras, connect the Ethernet cable to the camera to be 
added,...

11 Changing the Camera's User Name
134
11 Changing the Camera's User Name
To view images from cameras registered using Quick Setup on a computer without 
setting the administrator name or password, change the user name and password 
for a camera using the following procedure.
1.Select [General Setup] from the [Setup] screen (see page 95) and press 
[ENTER].
2.Set the administrator name and password on the [Camera] tab (see 
page 100).
3.Move the mode switch on the BL-WV10A to Setup and turn the...

12 Default Settings for the BL-WV10A
[For assistance, please call: 1-800-272-7033] 135
12 Default Settings for the BL-WV10A
ItemDefault Setting
Date and TimeJAN 01 SAT 2005 12:00 AM
Security Security Code9999
Alarm Volume2
Network IP address192.168.0.250
Subnet Mask255.255.255.0
Gateway192.168.0.1
DNS10.0.0.0
DNS20.0.0.0
Proxy Server-
Proxy Port8080
Camera Starting Address192.168.0.131
Admin User Name-
Admin Password-
Wireless Wireless ModeAccess Point
Wireless Format802.11b/g
SSIDnoted on back of unit...

13 Specifications
136
13 Specifications
LAN Interface
Wireless Interface
ItemSpecification
Number of ports4 port
Connector type8-pin modular jack (RJ-45)
Physical interfaceIEEE802.3 (10BASE-T)
IEEE802.3u (100BASE-TX)
MDI/MDI-X with auto-detect
ItemSpecification
IEEE802.11g
Transmission protocolOFDM (IEEE802.11g standard)/DS-SS 
(IEEE802.11b compatible), half duplex
Transmission speed
*1
*1 The values listed here are the theoretical maximum transmission speeds for wireless 
networks, and do not represent...

13 Specifications
[For assistance, please call: 1-800-272-7033] 137
Video Output
User Interface
Other
ItemSpecification
Video formatNTSC
Output portSingle port
Output level1.0 Vp-p (75 Ω)
ItemSpecification
FAC TO RY  D E FAU LT  
RESET buttonRestoration of default settings
Mode switchNormal, Setup, Sequential Display
BuzzerCamera sensor notification
Indicator displaysPower (green/amber/red), Sensor (amber)
Alert (green), SD Memory Card (green/amber)
Wireless (green), LAN 1–4 (green)
Recording mediaSD...

13 Specifications
138
Camera Viewer
Setup
Wireless Terminal Feature
ItemSpecification
Camera image 
displayDisplays a maximum of 8 camera images
Video (motion JPEG): 640x480, 320x240
1 screen per 8 pages, 4 screens per 2 pages
Camera pan/tilt operations, image size switching, 
resolution switching
Recording to and 
playing from SD 
memory cardsMovies (motion JPEG): 640 x 480, 320 x 240
Saved in QuickTime format
Pictures (JPEG): 640 x 480, 320 x 240
Timer recording
Camera motion 
sensor supportAutomatic...

14 When the Remote Control is Missing
[For assistance, please call: 1-800-272-7033] 139
14 When the Remote Control is Missing
14.1 Sequential Display Mode
The BL-WV10A requires the remote control to operate. If you lose your remote 
control, contact your dealer to purchase a new one (part number PSWEWV10A).
Even without a remote control, however, setting the mode switch to [SEQ. DISP.] 
will allow you to view sequentially the screens from registered cameras.
1.Set the BL-WV10A's mode switch to [SEQ....

15 Error Messages
140
15 Error Messages
Quick Setup Error Messages
Error MessageCauses and Solutions
Camera setup error
Confirm connections and 
try againThis error appears if at some point during Quick 
Setup, connection with the camera was lost, 
which prevents Quick Setup from completion.
• Check all cables, press the FACTORY 
DEFAULT RESET button on the camera, and 
re-perform Quick Setup.
This camera's firmware is 
out of date
Update camera firmwareThis error appears when the firmware for a...