Panasonic Wireless Camera, Monitoring System Bl-wv10a Operating Instructions

4 Recording Images
[For assistance, please call: 1-800-272-7033] 81
Screen Display when the Timer is On
When set for timer recording, a notification will appear prior to the start of timer 
recording.
• The following message will be displayed a few minutes before recording begins.
[Recording will begin shor tly.]
• The following message will begin just before recording begins:
[Recording will begin in 5 seconds. The current operation will be canceled.]
• When recording begins, the current display will...

4 Recording Images
82
• The continuous sensor recording [Recorder] screen appears.
Note
• To record from remote cameras using sensor activation, confirm that the 
cameras are set for sensor use (see page 117).
5.Select the camera.
6.Press [RETURN].
• Confirm the name of the selected camera, and continuous sensor 
recording is now set.
7.To activate continuous sensor recording, press [TIMER] to turn the timer 
on.
• Upon doing so, the timer/busy indicator will turn green, and timer 
recording will begin...

4 Recording Images
[For assistance, please call: 1-800-272-7033] 83
Note
• HCM series cameras cannot record by sensor. Do not set sensor 
recording for an HCM series camera.
• If the power fails or is turned off during a continuous sensor recording, you 
may see an error result. If that occurs, erase the timer recording settings 
(see page 84).
• During continuous sensor recording, when sensor activation is used to 
record images, the sensor indicator will begin flashing once the camera’s 
sensor is...

4 Recording Images
84
• The content of sensor recording is different for local and remote cameras. 
Local cameras capture 5 frames both before and after sensor activation. 
In addition, sensor response timing may lead to fewer recorded frames for 
each response. Remote cameras record the image at time of activation.
• We recommend using a recording mode of either HIGH or LOW for sensor 
recording.
4.5 Confirming, Changing and Erasing Timer 
Recording Programs
When you select [Recorder] from the Menu...

4 Recording Images
[For assistance, please call: 1-800-272-7033] 85
Recording Errors
When an error occurs during timer or continuous sensor recording, an error icon 
appears. Once an error occurs, timer recording stops. Press [1] to cancel the 
settings, and re-do them to begin recording again.
Changing Timer Recording Content
1.In the [Recorder] screen for timer recording, select the timer recording you 
wish to change and press [ENTER].
• The Timer Recording Settings Screen appears.
2.Change the...

4 Recording Images
86
Confirming Continuous Sensor Recording Settings
In the [Recorder] screen for continuous sensor recording, you can confirm the 
current settings and camera for continuous sensor recording.
Changing Continuous Sensor Recording Settings
In the [Recorder] screen for continuous sensor recording, select the camera name 
you wish to change.
• The camera set for continuous sensor recording is changed.
Erasing Continuous Sensor Recording Settings
In the [Recorder] screen for continuous...

4 Recording Images
[For assistance, please call: 1-800-272-7033] 87
[When Errors Occur]
If an error occurs during continuous sensor recording, an error icon appears (see 
page 85).
Once an error occurs, continuous sensor recording stops.
Press [1] to cancel the settings, and re-do them to begin recording again. 

5 Viewing Movies and Pictures
88
5 Viewing Movies and Pictures
5.1 Playing Movies
There are 2 ways to play recorded movies: press the PLAY key on the remote 
control or select the movie in the image list.
Pressing the PLAY Key
1.Insert an SD memory card containing movies into the BL-WV10A.
2.When the Monitoring Screen is visible, press [PLAY].
• The movie selected in the movie list will play.
• Press [DISPLAY] while the movie is playing to display information (see 
page 90).
Selecting the Movie
1.Insert...

5 Viewing Movies and Pictures
[For assistance, please call: 1-800-272-7033] 89
Note
• You can also select any of the images (in thumbnail view) from the list in 
the Recording Playback Screen.
5.2 Useful Tips for Movie Playback
Pausing Playback
When the movie is playing, press [PLAY] to pause playback.
• To return to playback, press [PLAY] again.
Note
• If you press [SNAPSHOT] while playback is paused, the paused image will be 
saved as a picture. When saved pictures are viewed, the long information...

5 Viewing Movies and Pictures
90
Viewing Movie Information
Select a movie on the [Movies] screen and press [3] to view information on the 
movie.
Viewing Movies Frame-by-Frame
Press [4] in the movie list screen to display the individual frames of the selected 
movie.
• Pictures are displayed in the order they were captured. Select a sequentially 
displayed image and press [ENTER] to view the selected image in full screen 
mode. Once in full screen mode, press [DISPLAY] to display the LONG 
information...