Panasonic Wireless Camera, Monitoring System Bl-wv10a Operating Instructions

5 Viewing Movies and Pictures
[For assistance, please call: 1-800-272-7033] 91
5.3 Erasing Recorded Movies
Erasing Movies
1.Select the movie to be erased in the [Movies] screen and press [1].
• The Confirm Deletion Screen appears.
2.Select [Erase] and press [ENTER].
• The selected image is erased.
Erasing All Movies
1.Press [2] in the [Movies] screen.
• The Confirm Deletion Screen appears.
2.Select [Erase] and press [ENTER].
• All recorded movies are erased. 

5 Viewing Movies and Pictures
92
5.4 Viewing Pictures
View pictures recorded as snapshots.
1.Insert an SD memory card with pictures into the BL-WV10A.
2.Press [MENU].
• The menu is displayed.
3.Select [Pictures] and press [ENTER].
• The [Pictures] appears.
4.Select an image and press [ENTER].
• The picture appears.
• Press [DISPLAY] while it is displayed to view image information (see 
page 126).
Picture list
Select to view the previous page.
Current date and time
Guidance is displayed
Select to view the...

5 Viewing Movies and Pictures
[For assistance, please call: 1-800-272-7033] 93
5.5 Useful Tips for Viewing Pictures
View a Slideshow
Select [3] in the Picture screen, and each individual picture will be sequentially.
Pictures are displayed in the order they were captured.
When the slideshow ends, the [Pictures] screen returns.
Press [STOP] during the slideshow to end it and return to the [Pictures] screen.
Viewing the Next (or Prior) Image
When a picture is displayed, press the left or right navigator...

5 Viewing Movies and Pictures
94
Erasing All Pictures
1.Press [2] in the [Pictures] screen.
• The Confirm Deletion Screen appears.
2.Select [Yes] and press [ENTER].
• All recorded pictures are erased. 

6 Setup Menu
[For assistance, please call: 1-800-272-7033] 95
6Setup Menu
The Setup menu can be used to set the clock for the BL-WV10A, perform its initial 
setup, configure cameras and manage SD memory cards.
1.Press [MENU].
• The menu is displayed.
2.Select [SETUP] and press [ENTER].
• The Setup menu screen appears.
Date and Time:
The time is set with manual input (see page 96).
General Setup:
Change the initial settings for the BL-WV10A (see page 97).
Camera Setup:
You can register cameras manually...

6 Setup Menu
96
6.1 Date and Time
The BL-WV10A receives date and time information from registered and connected 
cameras each time it starts up. In addition, the internal clock can sometimes speed 
up or slow down based on environment temperatures. If the time displayed is off, 
the date and time can be set manually.
1.Select [Date and Time] from the [Setup] screen (see page 95) and press 
[ENTER].
• The Clock Settings screen appears.
2.Use the left and right navigator keys to select the desired...

6 Setup Menu
[For assistance, please call: 1-800-272-7033] 97
6.2 General Setup
1.Select [General Setup] from the [Setup] screen (see page 95) and press 
[ENTER].
• The security screen appears.
2.Enter the security code.
• The default code is 9999.
• The [General Setup] screen appears.
3.Select the category of settings you wish to change, then press [ENTER].
• BL-WV10A settings (security code and alarm volume) (see page 98)
• Network settings (see page 99)
• Camera settings (see page 100)
• Wireless...

6 Setup Menu
98
4.When your changes are complete, press [RETURN] to return to the prior 
menu.
Security
Change the settings for the BL-WV10A's security code and alarm volume
SettingDescription
Security 
CodeSet the security code needed for [General Setup] and [Camera 
Setup].
Select [Security Code] and press [ENTER].
The security screen appears.
Enter a new (4-digit) security code user the keypad on the remote 
control and press [ENTER].
The new security code is set.
Change the security code...

6 Setup Menu
[For assistance, please call: 1-800-272-7033] 99
Note
• If you forget the security code, you will be unable to enter the Setup 
screen, and you will need to reset the BL-WV10A. Doing so, however, will 
reset all of your settings to their defaults, and sever the connections to 
the cameras. If necessary, write down the security code and store it in a 
secure place.
• The security code must be 4 digits in length.
• If you forget the security code, push the FACTORY DEFAULT RESET button to...

6 Setup Menu
100
Note
• Please be aware that when you make changes to values set during Quick 
Setup, you may lose access to the network.
• If you make a mistake while changing these settings, use the FACTORY 
DEFAULT RESET button to restore the BL-WV10A's default settings (see 
page 131). Doing so, however, will reset all of your settings to their defaults, and 
sever the connections to the cameras. You will need to re-perform Quick Setup 
to register the cameras and set desired settings again....