Panasonic Wireless Camera, Monitoring System Bl-wv10a Operating Instructions

							5 Viewing Movies and Pictures
[For assistance, please call: 1-800-272-7033] 91
5.3 Erasing Recorded Movies
Erasing Movies
1.Select the movie to be erased in the [Movies] screen and press [1].
• The Confirm Deletion Screen appears.
2.Select [Erase] and press [ENTER].
• The selected image is erased.
Erasing All Movies
1.Press [2] in the [Movies] screen.
• The Confirm Deletion Screen appears.
2.Select [Erase] and press [ENTER].
• All recorded movies are erased. 
						

							5 Viewing Movies and Pictures
92
5.4 Viewing Pictures
View pictures recorded as snapshots.
1.Insert an SD memory card with pictures into the BL-WV10A.
2.Press [MENU].
• The menu is displayed.
3.Select [Pictures] and press [ENTER].
• The [Pictures] appears.
4.Select an image and press [ENTER].
• The picture appears.
• Press [DISPLAY] while it is displayed to view image information (see 
page 126).
Picture list
Select to view the previous page.
Current date and time
Guidance is displayed
Select to view the next page.
Current page/Total number of pages
The recording capacity for the 
currently selected recording mode for 
the SD memory card is displayed.Information about the 
selected picture (highlighted 
in yellow) is displayed 
						

							5 Viewing Movies and Pictures
[For assistance, please call: 1-800-272-7033] 93
5.5 Useful Tips for Viewing Pictures
View a Slideshow
Select [3] in the Picture screen, and each individual picture will be sequentially.
Pictures are displayed in the order they were captured.
When the slideshow ends, the [Pictures] screen returns.
Press [STOP] during the slideshow to end it and return to the [Pictures] screen.
Viewing the Next (or Prior) Image
When a picture is displayed, press the left or right navigator keys to view the next 
or previous image.
5.6 Erasing Recorded Pictures
Erasing Pictures
1.Select the picture to be erased in the [Pictures] screen and press [1].
• The Confirm Deletion Screen appears.
2.Select [Yes] and press [ENTER].
• The selected image is erased.
Press [DISPLAY] to view
different information 
about the picture. 
						

							5 Viewing Movies and Pictures
94
Erasing All Pictures
1.Press [2] in the [Pictures] screen.
• The Confirm Deletion Screen appears.
2.Select [Yes] and press [ENTER].
• All recorded pictures are erased. 
						

							6 Setup Menu
[For assistance, please call: 1-800-272-7033] 95
6Setup Menu
The Setup menu can be used to set the clock for the BL-WV10A, perform its initial 
setup, configure cameras and manage SD memory cards.
1.Press [MENU].
• The menu is displayed.
2.Select [SETUP] and press [ENTER].
• The Setup menu screen appears.
Date and Time:
The time is set with manual input (see page 96).
General Setup:
Change the initial settings for the BL-WV10A (see page 97).
Camera Setup:
You can register cameras manually (see page 105) and change camera settings 
(see page 108).
SD Card Info:
Display information on and format SD memory cards (see page 120). 
						

							6 Setup Menu
96
6.1 Date and Time
The BL-WV10A receives date and time information from registered and connected 
cameras each time it starts up. In addition, the internal clock can sometimes speed 
up or slow down based on environment temperatures. If the time displayed is off, 
the date and time can be set manually.
1.Select [Date and Time] from the [Setup] screen (see page 95) and press 
[ENTER].
• The Clock Settings screen appears.
2.Use the left and right navigator keys to select the desired information, then 
press the top or bottom navigator keys to change the setting and press 
[ENTER].
• When you set the time manually, the clocks of all connected local cameras 
will be synchronized to match.
Note
• The BL-WV10A will be unable to receive time data if no cameras are connected 
when it starts up. In that instance, set the clock manually.
• If [DST] is turned on, the BL-WV10A will automatically adjust its clock for 
Daylight Saving Time. The clock will move forward 1 hour at 2:00 AM on the first 
Sunday in April, and will move back 1 hour at 3:00 AM on the last Sunday in 
October.
When Connected to a Router
• Time data can be obtained from remote cameras, but that data will not 
overwrite settings in the BL-WV10A. The time displayed while monitoring and 
the time used for recording purposes is taken from the BL-WV10A's clock. If the 
time in a remote camera is off, connect to it with a computer and reset its clock 
to match that of the BL-WV10A. 
						

							6 Setup Menu
[For assistance, please call: 1-800-272-7033] 97
6.2 General Setup
1.Select [General Setup] from the [Setup] screen (see page 95) and press 
[ENTER].
• The security screen appears.
2.Enter the security code.
• The default code is 9999.
• The [General Setup] screen appears.
3.Select the category of settings you wish to change, then press [ENTER].
• BL-WV10A settings (security code and alarm volume) (see page 98)
• Network settings (see page 99)
• Camera settings (see page 100)
• Wireless settings (see page 101)
• Sensor settings (see page 104)
• Status settings (see page 105) 
						

							6 Setup Menu
98
4.When your changes are complete, press [RETURN] to return to the prior 
menu.
Security
Change the settings for the BL-WV10A's security code and alarm volume
SettingDescription
Security 
CodeSet the security code needed for [General Setup] and [Camera 
Setup].
Select [Security Code] and press [ENTER].
The security screen appears.
Enter a new (4-digit) security code user the keypad on the remote 
control and press [ENTER].
The new security code is set.
Change the security code frequently to maintain security.
Alarm 
Vo l u m eSets the volume for the buzzer in Sensor Alert mode and the 
operational volume.
Select a volume setting (off, 1, 2, 3 or 4) and press [ENTER].
The buzzer will sound to confirm the new volume setting. 
						

							6 Setup Menu
[For assistance, please call: 1-800-272-7033] 99
Note
• If you forget the security code, you will be unable to enter the Setup 
screen, and you will need to reset the BL-WV10A. Doing so, however, will 
reset all of your settings to their defaults, and sever the connections to 
the cameras. If necessary, write down the security code and store it in a 
secure place.
• The security code must be 4 digits in length.
• If you forget the security code, push the FACTORY DEFAULT RESET button to 
restore the BL-WV10A's default settings (see page 131). You will need to re-
perform Quick Setup to register the cameras and set desired settings again.
• Setting the volume to off will turn off both the buzzer and any operational 
sounds.
• To turn off the volume for the buzzer in Sensor Alert mode only, press [ALERT].
Network Settings
Change the settings for the BL-WV10A's network information.
Note
• If the BL-WV10A will not be connected to a network (the BL-WV10A will only 
be connected to cameras), these settings can be ignored.
SettingDescription
IP Address/
Subnet MaskSet the IP address and subnet mask for the BL-WV10A.
GatewaySet the gateway address
DNS1/DNS2Set the IP address for the DNS server.
Up to 2 DNS server addresses can be set.
Proxy Server/
Proxy PortIf you will use a proxy server to view camera images, enter its 
name and port number here. 
						

							6 Setup Menu
100
Note
• Please be aware that when you make changes to values set during Quick 
Setup, you may lose access to the network.
• If you make a mistake while changing these settings, use the FACTORY 
DEFAULT RESET button to restore the BL-WV10A's default settings (see 
page 131). Doing so, however, will reset all of your settings to their defaults, and 
sever the connections to the cameras. You will need to re-perform Quick Setup 
to register the cameras and set desired settings again.
Camera Settings
Change the camera network settings.
Note
• The administrator name and password must be between 6 and 15 
alphanumeric characters in length. The following characters cannot be used:
"  <  >  :  &.
• When you re-register cameras using Quick Setup after changing the 
administrator name and password, the user name and password for the camera 
SettingDescription
Starting AddressSet the IP address to be used when a camera is 
configured using Quick Setup. A maximum of 8 
addresses will be created and used, starting 
sequentially from this entry. If you run Quick Setup 
after connecting a BB-HGW700A, the starting 
address will be displayed as [Auto] and cannot be 
set manually.
Admin User NameSet the user name for local cameras for Quick Setup. 
This user name is used when connecting to local 
cameras.
Admin PasswordSet the password for local cameras for Quick Setup. 
This password is used when connecting to local 
cameras.