Panasonic Wireless Camera, Monitoring System Bl-wv10a Operating Instructions

							6 Setup Menu
[For assistance, please call: 1-800-272-7033] 111
Privacy Mode
"Privacy Mode" allows you to make sure images from the camera cannot be seen 
by rolling the lens back into the camera. It can be set by pressing the PRIVACY 
button on the camera.
SettingDescription
Privacy 
ButtonChoose to activate or deactivate the functionality of the camera's 
PRIVACY button.
Setting to [Disable] will disable the camera's PRIVACY button so 
that it cannot be turned on/off.
PRIVACY button lights in 
red when Privacy Mode is 
turned on
PRIVACY button
Lens 
						

							6 Setup Menu
112
Note
• Cameras with Privacy Mode turned on will not appear on the Monitoring 
screen.
• When you select a camera that has Privacy Mode turned on, the following 
screen will appear, and you will be unable to change any settings. To make 
changes, select [Yes] and turn off Privacy Mode.
• Pressing the camera's PRIVACY button can also be used to disable Privacy 
Mode.
Restart
This re-initializes and restarts the camera with its default settings.
Re-initialization:
To change the camera's user name and password, or to re-perform Quick Setup, 
you will need to re-initialize the camera, restoring its default settings.
To do so, press the camera's FACTORY DEFAULT RESET button.Privacy 
Mode On/
OffTo turn on Privacy Mode, select [Privacy Mode On/Off] and 
press [ENTER].
• The Privacy Mode confirmation screen will appear. 
Select [Yes] and press [ENTER] to set this feature.
SettingDescription 
						

							6 Setup Menu
[For assistance, please call: 1-800-272-7033] 113
Re-initializing a camera will not erase it from the BL-WV10A's Camera List.
Restarting:
If you adjust a camera's lens direction by hand, the pan/tilt function on the remote 
control will cease to work. In this instance, restart the camera.
Note
• Re-initializing the camera will prevent network connection. Re-perform Quick 
Setup to re-register the camera.
Status Display
Displays the camera settings.
SettingDescription
InitializeTo re-initialize the camera, select [Initialize] and press 
[ENTER].
• The Re-initialization Confirmation screen will appear. 
Select [Yes] and press [ENTER] to re-initialize the 
camera.
RestartTo restart the camera, select [Restart] and press [ENTER].
• The Restart Confirmation screen will appear. Select 
[Yes] and press [ENTER] to restart the camera. 
						

							6 Setup Menu
114
Image Confirmation
Confirms settings on screen.
6.4.2 Camera Setup for Remote Cameras
Camera Information
Changes the camera name and address.
SettingDescription
StatusDisplays the following camera data: model information, 
application, CGI, IP address and MAC address.
SettingDescription
ConfirmTo confirm a set image on screen, select [Click here to 
confirm camera image.] and press [ENTER].
• The camera image will be displayed at low 
resolution. 
						

							6 Setup Menu
[For assistance, please call: 1-800-272-7033] 115
User Information
Change the camera's user name and password and turn password saving on or off.
SettingDescription
CameraDisplay and change the camera name.
Select [Camera] and press [ENTER] to display the character 
input screen. (See page 121 for more information on text 
entry.)
Address:PortSets the IP address or URL and the port number for the 
camera.
Enter in the following format: IP address:port number or 
URL:port number.
If you don't enter a port number, it will be set to 80.
Proxy ServerTurns the use of a proxy server on or off.
Turn this setting on if a proxy ser ver is needed to access the 
camera's URL or IP address. Also, enter the proxy server and 
port indicated in the [General Setup] screen (see page 99).
Refresh RateChoose an interval to refresh the monitoring image from 
among motion, 3s, 5s or 10s. When publishing the camera 
externally, this setting can be used to avoid an excessive 
invasion of privacy. If the update interval is set to a value other 
than motion, image recording can occur for a longer period of 
time as a result.
Image QualityThe quality of the monitored image can set to the standard 
setting, or to favor either clarity or motion. 
						

							6 Setup Menu
116
Image Confirmation
Confirms settings on screen.
SettingDescription
User NameDisplay and change the camera's user name.
Select [User Name] and press [ENTER] to display the 
character input screen. (See page 121 for more information on 
text entry.)
Password SaveSets the option to save the camera password.
Turning it off will require the entry of a user name and 
password whenever a camera is accessed. Turning off 
password saving will disable timer recording settings (see 
page 78).
PasswordChanges the password.
Select [Password] and press [ENTER] to display the character 
input screen. (See page 121 for more information on text 
entry.)
SettingDescription
ConfirmTo confirm a set image on screen, select [Click here to 
confirm camera image.] and press [ENTER].
• The camera image will be displayed at low 
resolution. 
						

							6 Setup Menu
[For assistance, please call: 1-800-272-7033] 117
Using the Sensor
Sets the use of the sensor.
Note
• When a remote camera’s IP address setting is changed, set the camera’s 
sensor setting to the desired setting once again.
• An attempt to disable sensor use for a camera set for continuous sensor 
recording will display the following error message: [This sensor is used for 
sensor recording. Turn off the record program.] will be displayed. To turn sensor 
use off, first erase continuous sensor recording settings (see page 84).
• An attempt to disable sensor use for a camera set for timer sensor recording 
will display the following error message: [This sensor is used for timer 
SettingDescription
SensorChoose to turn sensor use on or off.
Turn sensor use on for sensor recording or Sensor Alert.
• Sensor use cannot be turned on of password saving is 
turned off. To use sensors, turn password saving on 
(page 115). 
						

							6 Setup Menu
118
recording. Turn off the record program.] will be displayed. To turn sensor use 
off, first erase timer sensor recording settings (see page 84).
• To use a remote camera in Sensor Alert mode, for sensor recording, or for 
continuous sensor recording, turn on sensor use.
6.5 Erasing a Camera
1.Select [Camera Setup] from the [Setup] screen (see page 95) and press 
[ENTER].
2.Select the camera to be erased from the list and press [1].
• The confirmation screen appears.
3.Select [Yes] and press [ENTER].
• The camera is erased from the list.
• Once erased, the camera is unregistered.
If you attempt to erase a camera set for timer recording, one of the following errors 
will appear.
When timer recording is set:
“This camera is used for timer recording. Turn off the record program.”
Erase the timer recording program (see page 84) and then try erasing the camera.
When continuous sensor recording is set:
“This camera is used for sensor recording. Turn off the record program.”
Erase the sensor recording program (see page 84) and then try erasing the 
camera.
When both timer and continuous sensor recording is set:
“This camera is used for timer recording. This camera is used for sensor recording. 
Turn off the record program.”
Erase the timer recording and sensor recording programs (see page 84), then try 
erasing the camera. 
						

							6 Setup Menu
[For assistance, please call: 1-800-272-7033] 119
Note
• If turning the timer off by pressing [TIMER] does not cancel the timer recording, 
the camera cannot be erased.
When the camera is used for Sensor Alert:
“This camera is used for Sensor Alert mode. Set Sensor Alert to [-] on the [Camera 
Sensors] screen.”
Deactivate the camera for Sensor Alert mode as explained in the error message 
and then try erasing the camera.
6.6 Changing the Order of the Camera List
1.Select [Camera Setup] from the [Setup] screen (see page 95) and press 
[ENTER].
2.To move a camera up in the list, select it and press [2].
3.To move a camera down in the list, select it and press [3].
Note
• The order of the cameras displayed in the Camera List in normal mode 
and the order of cameras displayed in the Quick Setup screen are 
controlled separately. The order of cameras displayed in the Quick Setup 
screen when adding cameras is not the same as ordered in the Camera 
List. 
						

							6 Setup Menu
120
6.7 Viewing SD Memory Card Information
1.Select [SD Card Info] from the [Setup] screen (see page 95) and press 
[ENTER].
• The SD Memory Card Management screen appears.
Formatting an SD Memory Card
Select [Format] and press [ENTER] to initialize an SD memory card.
Note
• Once formatting begins, all data on the card will be erased. Be careful not to 
format the wrong card.