Panasonic Wireless Camera, Monitoring System Bl-wv10a Operating Instructions

6 Setup Menu
[For assistance, please call: 1-800-272-7033] 101
will be changed to the new administrator name and password. The new 
administrator name and password will not overwrite user names and 
passwords for cameras that have already been registered. You will continue to 
be able to use the existing user names and passwords for those local cameras. 
To re-register those cameras with the new administrator name and password, 
see page 134.
• If you aren't planning to access a camera with a...

6 Setup Menu
102
Note
• Use the same encryption key number and type for any wireless terminal to be 
connected.
Note
• To register a BL-C30A, you will need to specify 2 MAC addresses. Choose the 
MAC address indicated on the base of the BL-C30A and one from the following 
table based on the last digit in the BL-C30A's MAC address.
For example, if the MAC address for the BL-C30A is 00:80:F0:54:C0:C4, you 
should specify 00:80:F0:54:C0:C4 and 00:80:F0:54:C0:C5.
Certain changes may require the BL-WV10A...

6 Setup Menu
[For assistance, please call: 1-800-272-7033] 103
1.If after making changes a restart is needed, the [Restart] tab will appear.
2.Select the [Restart] tab and the [Restart] button will appear.
3.Press the [Restart] button, and the Restart Confirmation screen will appear. 
Select [Yes] and press [ENTER] to restart the BL-WV10A.
Note
• Please be aware that when you make changes to values set during Quick 
Setup, you may lose access to the network.
Restart tab 

6 Setup Menu
104
Sensor Settings
The BL-WV10A displays an account name and password for its FTP server in order 
to receive sensor-detected images from the cameras.
Note
• The FTP account name and password are set automatically. Change them to 
increase security when necessary.
• The FTP account name and password must be between 6 and 15 
alphanumeric characters in length. " cannot be used.
SettingDescription
FTP User NameSet the account name to log on to the FTP server within the 
BL-WV10A.
FTP...

6 Setup Menu
[For assistance, please call: 1-800-272-7033] 105
Status Settings
Displays a list of settings
6.3 Registering a Camera Manually
1.Select [Camera Setup] from the [Setup] screen (see page 95) and press 
[ENTER].
• The security screen appears.
2.Enter the security code.
• The default code is 9999.
SettingDescription
Vers i o nDisplays information on the BL-WV10A firmware and the 
wireless firmware.
NetworkDisplays the IP address, subnet mask, DNS servers, proxy 
server, proxy port and MAC...

6 Setup Menu
106
• The Camera Setup screen appears.
Note
• Local cameras are designated with the word "Local" in the right-hand 
column.
3.Select [–] from the list of registered cameras and press [ENTER].
• The New Camera Registration screen appears.
4.Enter the appropriate settings.
SettingDescription
CameraSets the camera name. Select [Camera] and press 
[ENTER] to display the character input screen. (See 
page 121 for more information on text entry.) Specify a 
name for the camera using...

6 Setup Menu
[For assistance, please call: 1-800-272-7033] 107
5.Select [Save] and press [ENTER].
• If you select [Cancel] and press [ENTER], the entered settings will not be 
registered.
Note
• When registering a camera via the Internet, set the camera's IP address 
or URL and its port number in the camera address setting. When using a 
URL for a camera address, be sure to set the correct IP address for the 
DNS servers in the [General Setup] screen (see page 99).
• When entering the camera address...

6 Setup Menu
108
6.4 Camera Setup
You can change camera settings.
You can also erase a camera from the list or change its position in the list.
1.Select [Camera Setup] from the [Setup] screen (see page 95) and press 
[ENTER].
2.Select the camera whose settings you wish to change and press [ENTER].
• When the selected camera is a local camera, the Local Camera Setup 
screen will appear; for remote cameras, the Remote Camera Setup 
screen will appear.
Local Camera Setup Screen
Remote Camera Setup Screen 

6 Setup Menu
[For assistance, please call: 1-800-272-7033] 109
Note
• When you select a local camera using the Privacy Mode feature, the 
Disable Privacy Mode screen will appear. To change camera settings, 
select [Yes] to disable the Privacy Mode feature.
3.Enter the appropriate settings.
• For local cameras, see page 109. For remote cameras, see page 114.
6.4.1 Camera Setup for Local Cameras
Camera Information
SettingDescription
CameraDisplay and change the camera name.
Select [Camera] and press...

6 Setup Menu
110
Note
• When registering a preset, the white balance and brightness settings used at 
the time of registration will also be saved. This settings will be effective when 
the camera moves to the preset position. White BalanceChoose from Auto, Incandescent, Fluorescent 1, Fluorescent 
2, Outdoor, or Manual 
*1.
Auto ReturnChoose either none or a duration between one and thirty 
minutes. For the camera in question, if no operation occurs 
during the specified time, the sensor position will...