Panasonic Wireless Camera, Monitoring System Bl-wv10a Operating Instructions

Operating Instructions
Please read this manual before using and save this manual for future reference.
Wireless Camera
Monitoring System
Panasonic Network Camera Website: http://www.panasonic.com/netcam
for customers in the USA or Puerto Rico
Model No.BL-WV10A 

2
Main Features
Camera Image Monitoring
Simply connect the BL-WV10A to your Panasonic home network cameras (sold 
separately) and to your TV, and you'll be able to view camera images conveniently 
on your TV.
Wireless cameras such as the BL-C30A can be connected as well, meaning you 
won't have to worry about running cables from the BL-WV10A to each camera.
Pan/Tilt Feature
Aim the camera wherever you want by simply pressing the navigator keys on the 
included remote control.
Sensor Alert...

[For assistance, please call: 1-800-272-7033] 3
Quick Setup
Configuration is quick and easy with the BL-WV10A's Quick Setup feature–connect 
your cameras to the BL-WV10A and Quick Setup will handle the rest.
Recommended Accessories (sold separately)
Compatible router:
• Panasonic BB-HGW700A Network Camera Management System 
Compatible Network Cameras:
• Panasonic BL-C10A, BL-C30A (firmware version 1.22 or higher)
• HCM series (firmware version 1.08 or higher, however, some features 
cannot be used;...

4
Camera Compatibility
The following HCM series camera features are not supported by the BL-WV10A.
In order to use the following HCM series camera features with the BL-WV10A, set 
the access settings for the general user (the user profile used by the BL-WV10A to 
access the HCM series camera) as shown below.
For more information, refer to the operating instructions provided with your HCM 
series camera.• Zoom • Listen
• Focus • Talk
• Click to Center Control • View Buffered Image Page
• External Output...

[For assistance, please call: 1-800-272-7033] 5
IMPORTANT SAFETY INSTRUCTIONS
When using this product, basic safety precautions should always be followed to 
reduce the risk of fire, electric shock, or personal injury.
1.Read and understand all instructions.
2.Keep these instructions.
3.Heed all warnings.
4.Follow all instructions.
5.Do not install this product near any heat sources such as radiators, heat 
registers, stoves, or other apparatus (including amplifiers) that produce heat.
6.Protect the AC...

6
Notice Regarding Battery Safety
1.Do not open or mutilate the batteries. Released electrolyte from the batteries 
is corrosive and may cause burns or injury to the eyes or skin. The electrolyte 
may be toxic if swallowed. If electrolyte comes in contact with the eyes, flush 
eyes with water.
2.Do not mix old and new batteries.
3.Do not heat or expose to flame.
4.Do not take apart or short circuit.
5.Do not attempt to recharge alkaline or manganese batteries.
6.Remove if the remote control is not going...

[For assistance, please call: 1-800-272-7033] 7
FCC and Other Information
This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the instructions, may 
cause harmful interference to...

8
FCC RF Exposure Warning:
• To comply with FCC RF exposure requirements in uncontrolled environment:
• This equipment must be installed and operated in accordance with provided 
instructions and a minimum 20 cm (8 inches) spacing must be provided 
between antenna and all person's body (excluding extremities of hands, wrist 
and feet) during wireless modes of operation.
• This transmitter must not be co-located or operated in conjunction with any 
other antenna or transmitter.
Medical
Consult the...

[For assistance, please call: 1-800-272-7033] 9
Ta b l e  o f  C o n t e n t s
1 Names and Locations................................................. 12
1.1 Main Unit ......................................................................................12
1.2 Remote Control ............................................................................15
2 Connecting Cameras .................................................. 20
2.1 Local and Remote Cameras...

10
4 Recording Images ....................................................... 71
4.1 SD Memory Cards ....................................................................... 72
4.2 Standard Recording..................................................................... 75
4.3 Snapshot Recording .................................................................... 75
4.4 Timer Recording .......................................................................... 76
4.4.1 Setup for Timer Recording...