Panasonic Wireless Camera, Monitoring System Bl-wv10a Operating Instructions

[For assistance, please call: 1-800-272-7033] 11
8.4 Displaying Information While Recording .....................................127
8.5 Temporarily Disconnecting a Camera.........................................129
8.6 When Two Events Occur Simultaneously ...................................130
9 Resetting the BL-WV10A.......................................... 131
10 Adding Cameras ....................................................... 132
11 Changing the Camera's User Name ...........................

1 Names and Locations
12
1Table of Con ten ts1 Names and Locations
1.1 Main Unit
Front Panel
1.SD Memory Card port (see page 72)
2.Timer/Busy indicator (see page 13)
3.Power indicator (see page 13)
4.Alert indicator (see page 13)
5.Sensor indicator (see page 13)
6.LAN indicators (see page 13)
7.Wireless indicator (see page 13)
8.Remote control sensor (see page 16
Rear Panel
1.DC IN jack (see page 23 or page 32)
2.Video output port (see page 23 or page 32)
3.LAN ports (see page 26 or page 32)
4.Mode...

1 Names and Locations
[For assistance, please call: 1-800-272-7033] 13
Indicators
The indicators display the status of the BL-WV10A and network conditions.
During Quick Setup
During Normal Operation
IndicatorColorDescription
Power Amber (flashing) Unit is in Quick Setup mode.
Wireless Green Quick Setup for a camera is in progress, 
or Quick Setup has been completed for 
the BB-HGW700A.
Green (flashing) Quick Setup has been completed for a 
camera.
IndicatorColorDescription
Timer/Busy Green Timer/Sensor...

1 Names and Locations
14
Sensor Amber The sensor is on.
Amber (flashing) The indicator will flash every 0.5 seconds 
when a camera’s built-in sensor is 
triggered. After detection, the indicator 
will flash every second. To turn off the 
indicator, see page 69.
Off The sensor is off.
LAN  1–4 Green The unit is connected to wired cameras or 
to a router.
Wireless Green The unit is connected to wireless 
cameras.
IndicatorColorDescription 

1 Names and Locations
[For assistance, please call: 1-800-272-7033] 15
1.2 Remote Control
1.[POWER] and [INPUT]:
You can program the remote control to turn your TV on and off when the 
[POWER] button is pressed, and to change the TV's video input. You must first 
program your TV's manufacturer code (see page page 18).
2.[MENU]: Press while monitoring a camera to display the [MENU] screen.
3.Number keys: Depending on the current screen, used to enter numbers and 
text, or aim the camera at a...

1 Names and Locations
16
9.Navigator keys: Used to select on-screen items or aim the camera in a 
different direction.
10.[ENTER]: Depending on the current screen, selects the highlighted setting or 
item, saves the current setting, or aims the camera at the home position (see 
page 59).
11.[RETURN] Returns to the previous or menu.
12.[ALERT]: Turns the buzzer on and off. The buzzer can be used to alert you to 
camera sensor detection.
13.[REC]: Press while monitoring a camera to record a movie....

1 Names and Locations
[For assistance, please call: 1-800-272-7033] 17
Note
• Do not place anything between the remote control sensor and the remote 
control.
• Do not expose the remote control sensor to direct sunlight or powerful inverter-
type fluorescent light.
• Should dust or grime accumulate on the remote control sensor and/or the 
remote control transmitter, the effective range will be shortened.
• To clean, wipe the remote control sensor and transmitter with a clean dry cloth.
• If the BL-WV10A...

1 Names and Locations
18
Programming the remote control
The remote control can be used to turn a television on and off, and to switch the 
television’s video input selection. If your television is not a Panasonic television, 
you can set the manufacturer’s code for the remote control.
While holding down [POWER], enter the 2-digit code found in the chart below that 
corresponds to your TV. Release [POWER] after you have entered the code.
Note
• When using the remote control to operate a television, aim...

1 Names and Locations
[For assistance, please call: 1-800-272-7033] 19
• Some manufacturers have multiple codes. If the code you entered does not 
work, please select one of the other codes for that manufacturer.
• If the television’s manufacturer is not listed above, please use the remote 
control supplied with the television.
• If the batteries are removed from the remote control for thirty minutes or longer, 
the remote control setting will be reset and you will need to enter the 
manufacturer’s code...

2 Connecting Cameras
20
2 Connecting Cameras
Up to 8 cameras can be registered to the BL-WV10A.
To use the BL-WV10A, you will need to configure the network settings for the BL-
WV10A as well as store the user names and passwords for cameras connected to 
the BL-WV10A. This can be done automatically using Quick Setup.
Quick Setup can be done in one of 3 different ways, depending on how the cameras 
are connected.
Connecting cameras directly to the BL-WV10A
To connect cameras directly to the BL-WV10A, see...