Panasonic Video Multiplexer Wj Fs616 Operating Instructions

-29- 4. Press the SET button to move the cursor to the
recording mode title area. The square cursor
appears in the character table.
5. To select a character, move the cursor on the
desired character in the table by pressing the
Direction Arrow buttons.
6. Press the SET button to pick up the character
and place it in the title area.
7. Repeat the above procedures 5 to 6 to set the
title.
8. If a wrong character is selected, press the
Increment (+) or Decrement (–) button to move
the cursor in the title...

-30-
System Setup
Move the cursor to SYSTEM SETUP on the SETUP
MENU, then press the SET button. The SYSTEM
SETUP menu appears on the monitor screen as
shown below.
Press the FUNCTION button to display the next
page. Press this button again to return to the previ-
ous page.
1. Clock Setup
This item lets you set the current time and date.
1. Move the cursor to CLOCK SETUP, then press
the SET button to move the cursor to the editing
area.
2. Move the cursor to the area you want to edit by
pressing the UP...

-31-
       SEQ1(SPOT-SEQUENCE)SETUP 1 OF 2
     AUTO SKIP  OFF
     DWELL TIME 2SEC
 STEP CAM PRE TIME   STEP CAM PRE TIME
   1  1CH  -  2SEC     9  9CH  -  2SEC
   2  2CH  -  2SEC    10 10CH  -  2SEC
   3  3CH  -  2SEC    11 11CH  -  2SEC
   4  4CH  -  2SEC    12 12CH  -  2SEC
   5  5CH  -  2SEC    13 13CH  -  2SEC
   6  6CH  -  2SEC    14 14CH  -  2SEC
   7  7CH  -  2SEC    15 15CH  -  2SEC
   8  8CH  -  2SEC    16 16CH  -  2SEC
 
   
Press the FUNCTION button to display the next
page, then press this...

-32-
       SEQ1(SPOT-SEQUENCE)SETUP 2 OF 2
            
  STEP CAM PRE TIME  STEP CAM PRE TIME
   17   -   -  2SEC   25   -   -  2SEC
   18   -   -  2SEC   26   -   -  2SEC
   19   -   -  2SEC   27   -   -  2SEC
   20   -   -  2SEC   28   -   -  2SEC
   21   -   -  2SEC   29   -   -  2SEC
   22   -   -  2SEC   30   -   -  2SEC
   23   -   -  2SEC   31   -   -  2SEC
   24   -   -  2SEC   32   -   -  2SEC
 
   
      SEQ3(MULTI-SEQUENCE)SETUP 1 OF 5
      AUTO SKIP  OFF
      STEP 1     CAM
      DWELL...

-33-
Dwell Time
1. Move the cursor to the DWELL TIME parameter.
2. Select the desired dwell time by pressing the LEFT
or RIGHT button.
Dwell Time can be selected between 0SEC and
30SEC.
Note:If 0SEC is selected for dwell time, that step
will not be shown on the monitor screen.
Display Channel Assignment
1. Move the cursor to the area number you want to
edit in the CAM area by pressing the Direction
Arrow buttons.
2. Select the desired camera or playback channel in
the CAM area by pressing the Increment...

-34-
      CABLE COMP/VD2/DATA SETUP 1 OF 2
 
         CAM  CABLE  VD2  DATA
 
         1CH    S    ON    ON
         2CH    S    ON    ON 
         3CH    S    ON    ON   
         4CH    S    ON    ON  
         5CH    S    OFF   OFF   
         6CH    S    OFF   OFF   
         7CH    S    OFF   OFF    
         8CH    S    OFF   OFF   
 
 
    
      CABLE COMP/VD2/DATA SETUP 2 OF 2
 
         CAM  CABLE  VD2  DATA
 
         9CH    S    OFF   OFF
        10CH    S    OFF   OFF 
        11CH    S...

-35-
11. Playback Mode
This item lets you select the ID code for playback of
recorded video tape.
1. Move the cursor to the PLAYBACK MODE para-
meter.
2. Select FIELD or FS10 by pressing the LEFT or
RIGHT button.
The initial factory setting is FIELD.
FIELD:Normal position.
FS10:Enables playback of a tape that is
recorded on the WJ-FS10.
12. Data Mode
This item lets you select an external controller from
the data port.
1. Move the cursor to the DATA MODE parameter.
2. Select CU550A or PC by pressing the...

-36-
15. VCR Input Select
This item lets you select the VCR input terminal.
1. Move the cursor to the VCR IN SELECT para-
meter.
2. Select VIDEO or S-VIDEO by pressing the LEFT
or RIGHT button.
VIDEO:Selects input from the VCR VIDEO ter-
minal.
S-VIDEO:Selects input from the VCR S-VIDEO
terminal.
The initial factory setting is VIDEO.
16. Daisy Mode
This item lets you select whether to have the video
signal connected to SPOT IN looped through to the
SPOT OUT connector (daisy-chain connection).
1. Move the...

-37-
            CAM UPLOAD
       UPLOAD          1CH  NO
 
   CAM    1  2  3  4  5  6  7  8 
   DATA  O+  - O+  -  - N-  +  -
 
   CAM    9 10 11 12 13 14 15 16 
   DATA   -  -  -  -  -  -  -  - 
 
      O:RESULT OK  +:DATA EXISTENCE
      N:RESULT NG  -:DATA NOTHING
              
   CAUTION:ALL ALARM INPUTS
           HAVE BEEN DISABLED.
           ALL RESET SELECT
       ALL-RESET      NO
   CAUTION:ALL ALARM INPUTS
           HAVE BEEN DISABLED.
Camera Upload
This item lets you upload camera setup...

-38-
OPERATING PROCEDURES
VCR
CAM
SPOT
ENTRANCE
STILL
SEQUENCE
MULTI
SCREEN
STILL
MONITOR CONTROL 
FUNCTION
Before starting the following procedures, all system 
components should be turned on.
Then set the LOCK switch to the OFF position.
Operating the Spot Monitor
The following operations are available on the Spot
Monitor.
Displaying the Camera Picture
1. Single Spot
1. Press the SPOTbutton.  The LED (green) on the
button lights up.
2. Press a CAMERA (1 - 16)button to display a
selected camera...