Panasonic Va-208 Key Telephone System Installation Manual

COL INCOMING 
RING NO RING 
1 RING ICOLl! 
I 
00 
P CALL DURING 
s 
0 COL AUTO ANSWER 
B 
. COL INTERRUPTION 
SET THE KEY TELEPHONE SPEAKERPHONE 
> SPEAKERPHONE 
CLASS 1 CLASS 2 CLASS 3 CLASS 4 
SERVICE CLASS 
SINGLE LINE KEY TELEPHONE SINGLE LINE TELEPHONE 
TELEPHONES TEL 7 1  

SPEED DIALING 00 01 02 03 04 05 
STORED COMMON 
NUMBERS 
06 07 
06 09 
10 11 12 
13 14 
15 
16 17 16 19 
20 21 
22 23 24 25 26 
27 28 29 
30 31 32 33 
34 35 36 
37 38 39 40 
41 42 
43 
44 45 46 47 
48 49 
50 61 62 53 54 
55 56 
57 
58 59 60 61 
62 63 
64 
66 66 67 68 
69 70 71 
72 73 74 75 
76 77 
78 
78 80 81 82 
83 84 
85 
88 87 88 FIRE 89 POLICE  

Operating 
Instructions 
Easa-Phon& 
Key Telephone System VA-208 
Panasonic 
Before operatmg this umt, please read these mstructms COmPkteb.  

Thank you for purchasing the Panasonic Easa-Phone VA-208. Key Telephone System. 
l This unit can be used with any of pulse and/or touch 
tone lines. 
In addition, two dialing speeds of 20 PPS (fast dialing 
speed) and 10 PPS (slow dialing speed) can be mixed 
as a dialing speed for a rotary dialing line. (Pulse 
Line) 
0 Keys used by this unit are all of a non-lock type. 
3 IMPORTAtiT INSTRUCTIONS 
Always follow the instructions below for your safety. 
l 
l This unit generates radio frequencies (RF)....

TABLE OF CONTENTS 
n Important Instructions ................... 1 
. 
Important Notice ....................... 4 
. Name and Function of each Item. 
............ 6 
n Accessories ........................... 7 
When providing COL communication (Central Office 
Telephone Line) 
.......................... 8 
1. When making a telephone call 
.............. 8 
(1) Manual dialing 
........................ 8 
(2) Redialing the last dialed telephone number ..... 9 
(3) Automatic dialing 
.........................

H IMPORTANT NOTICE 
This unit generates radio frequencies (RF). If not used 
in strict accordance with the manufacturer’s instruc- 
tions, it may cause interference to radio and television 
reception. This unit has been type tested and found to 
comply with the limits for a Class B computing device in 
accordance with the specifications in Subpart J of Part 
15 of the FCC Rules, which are designed to provide 
reasonable protection against such interference in a 
residential installation. However, there...

NAME AND FUNCTION OF EACH ITEM 
WHEN PROVIDING COL COMMUNICATION 
1. When making a telephone call. 
2. When storing numbers into the memory. 
3. When receiving a telephone call. 
4. When temporarily holding the line. 
5. When transferring a 
COL incoming call to another 
telephone. 
6. When providing COL conference. 
CONVENIENT FEATURES FOR COL COMMUNICATION 
WHEN PROVIDING INTERCOM COMMUNICATION 1. When making individual access to intercom. 
2. When making simultaneous access to intercom. 
3. When...

6 HNAME AND FUNCTION OF EACH ITEM 
1. Handset 
2. Speaker 
3 For enabling various signal sounds and conversation 
voices to be heard. 
One-Touch Button 
4 
5 Used for storing numbers in the memory (up to 10 
numbers every telephone) or dialing a number in the 
memory. 
Dialing Button 
INT Indicator 
6 Flashes in intercom arriving and in hold mode, and 
lights up in intercom communication mode. 
Line Selector Button 
- indicator 
Capable of connecting up to two CO lines. 
A lamp of the CO line being used...

1. WHEN MAKING A TELEPHONE CALL 
(1) Manual dialino 
l It will return to Standby mode unless the 
dialing is done within approximately 
15 
seconds after pressing Line Selector Button- 
Indicator, in the on hook dialing mode. 
l Set the knob of Monitor Volume Control 
@ to “High”, 
if the level of a noise 
around the telephone is high. 
(2) Redialing the last dialed telephone number 
l 
Ll 
t 
liEI 
t 
la 
3 
q 
8 Press the vacant Line Selector Button-lndi- 
cator @ 
. 
l COL dialing tone 
l SPKR...

(3) Automatic dialing 
In case of the automatic dialing, 88 stations for Common, 
2 stations for Emergency and 10 Stations for each indi- 
vidual telephone are available. 
0 Dialing a number stored in the memory 
10 
l Dialing en emergency number 1 Press the vacant Line Selector Button- 
Indicator @. 
2 Press AUTO Button @. 
t 3 To dial the number stored, press any two 
EI 
number from 
q p5J-az . 
i Now, the number is dialed automatically. I 
I 
I 
i____________________________________________J 
l 
la...