Panasonic Va-208 Key Telephone System Installation Manual

KEY TELEPHONE SETTINGS 
INTERCOM CALL DURING CONVERSATION 
Step 4 
4a. 
4b. 
Step 5 
Step 6 Activate only one (1) of the following options: 
To set the TEL Station to receive INTERCOM INCOMING CALL DURING 
CONVERSATION, depress the SPKR button, 
if extinguished, to light the LED lamp. 
OR 
To set the TEL Station to not receive INTERCOM INCOMING CALL DURING 
CONVERSATION, depress the SPKR button, 
if on, to extinguish the LED lamp. 
Depress the # button on the Dial Pad to store the program established in...

Step 4 
4a. 
4b. 
Step 5 
Step 6 
KEY .TELEPHONE SETTINGS 
COC AUTO ANSWERING 
Activate only one (1) of the following options: 
To set the TEL Station for COL AUTO ANSWERING, depress the COL 1 button, 
if extinguished, to light the LED lamp. 
OR 
To set the TEL Station for no COL AUTO ANSWERING, depress the COL 1 button, 
if on, to extinguish the LED lamp. -1 
Depress the # button on the Dial Pad to store the program established in Step 4. 
Proceed to next feature program or to end programming, depress...

Step 4 
4a. 
4b. 
Step 5 
Step 6 
KEY TELEPHONE SETTINGS 
COL INTERRUPTION 
Activate only one (1) of the following options: 
To set the TEL Station for COL INTERRUPTION, depress the COL 2 button, 
if 
extinguished, 
to light the LED lamp. 
OR 
To set the TEL Station for no COL INTERRUPTION, depress the COL 2 button, 
if on, to extinguish the LED lamp. 
Depress the # button on the Dial Pad to store the program established in Step 4. 
Proceed to next feature program or to end programming, depress FLASH...

Is-__ --_ --._-__- ----__.-- KEY TELEPHONE SETTINGS 
SET *THE SPEAKERPHONE 
This feature is to indicate whether a TEL Station is connected as a Key Telephone or as a Key Telephone with a Speakerphone. 
Each TEL Station must be individually programmed for SET THE SPEAKERPHONE. 
NOTE: Only one TEL Station can be programmed at at a time. To change the SET THE SPEAKERPHONE on multiple 
TEL Stations, complete Steps 1 thru 5 for the first TEL Station and then repeat Steps 3 thru 5 for each remaining 
TEL...

KEY TELEPHONE SETTINGS 
. SERVICE CLASS 
Step 4 
4a. 
4b. 
4c. 
4d. 
Step 5 
Step 6 
Activate only one (1) of the following options: 
To set the TEL Station for CLASS l-No Outward Dialing, depress the 
SPKR and REDIAL buttons, 
if on, to extinguish the LED lamps. 
OR 
Option 1 SPKR 1 REDIAL 
i Class 1 1 OFF 1 OFF 
To set the TEL Station for CLASS 2-Local Calling Only, depress the 
SPKR button, 
if on, to extinguish the LED lamp and depress the REDIAL 
button, 
if extinguished, to light the LED lamp. 
OR...

Step 4 
4a. 
4b. 
To set for NO RESTRICTION FOR DIALING STORED COMMON NUMBERS, 
depress the COL 1 button, 
if extinguished, to light the LED lamp. 
Step 5 Depress the # button on the Dial Pad to store the program established in Step 4. 
Step 6 
Proceed to next feature program or depress FLASH button and SPKR button in sequence to end program: ?g 
mode. 
OUTWARD DIALING RESTRICTION SETTINGS 
RESTRICTED FROM DIALING STORED COMMON NUMBEF, 
Activate only one (1) of the following options: 
To set the...

PBX OUYWARD DIALING DIGITS 
This feature setting is required to indicate the dialing number for outward dialing when COL 1 and/or COL 2 are designated 
as PBX under the COL Setting-Type Of COL. 
0 The initial program setting is for the PBX OUTWARD DIALING on 9. 
0 To change the program setting, perform the following steps: 
Step 1 
Step 
2 
Step 3 
Step 4 
4a. 
4b. 
4c. 
4d. 
Place the system in the programming mode. See instructions in General Operational Procedures. 
Place TEL Station 1 in the...

4e. 
4f. 
49. 
4h. 
4i. 
4j. 
OUTWARD DIALING RESTRICTION SETTINGS 
PBX OUTWARD DIALING DIGITS 
To set the PBX OUTWARD DIALING DIGIT for 
“4”, depress the 
COL 1, SPKR and REDIAL 
buttons, 
if on, to extinguish the LED lamps. If 
the COL 2 button 
is extinguished, depress the 
COL 2 button to light the LED lamp. 
OR 
To set the PBX OUTWARD DIALING DIGIT for 
“5”, depress the COL 1 and SPKR buttons, 
if 
on, 
to extinguish the LED lamps. If the COL 2 
and REDIAL buttons 
are extinguished, 
depress the COL...

OUTWARD DIALING RESTRICTION SETTINGS 
PBX OUTWARD DIALING DIGITS 
Step 5 Depress the # button on the Dial Pad to store the program established in Step 4. 
Step 6 
Proceed to next feature program or depress FLASH button and SPKR button in sequence to end programming 
mode at TEL Station 1. 
DIALING SIGNAL SENT TIME 
This feature allows for the setting of the DTMF signal duration for either 80 msec or 160 msec. The standard DTMF signal 
duration is 80 msec, however when the Easa-Phone is connected to some...