Panasonic UF 8100 YC User Manual
Have a look at the manual Panasonic UF 8100 YC User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
81 UF-7000/8000 NOV 2004 Ve r. 2 . 0 UF-7100/8100 4.2.4. Fax Service Mode 3 (Printout of Lists, Reports and Test Results) From this Service Mode you can print the Function Parameter List, Page Memory Test, Printer Report, All Document File, Protocol Trace and the Toner Order Form. 4.2.4.1. Function Parameter List A list of all Function Parameters can be printed by the following procedure. Press the “V”, ”/\” arrow keys to select the 3: Print Report/List on the display. ↓ Press the “SET” key to select the 1: Function Parameter List. ↓ Press the “SET” key. ↓ Press the “STOP” key twice to exit the service mode. Downloaded From ManualsPrinter.com Manuals
82 UF-7000/8000 NOV 2004 Ve r. 2 . 0 UF-7100/8100 Note: 1. The contents of the Function Parameter List may vary depending on the country’s regulations. 2. “ * ” mark will be shown on the left side of number when setting was changed from default. Function Parameter List (Sample) ************* -FUNCTION PARAMETER- ************* DATE MMM-dd-yyyy ***** TIME 12:07 ***P.01 -PANASONIC - Note: The power must be reset for the new parameter settings to take effect. ***** ******************* - - ****** -12345678901234567890- *********000 Mon/Tel Dial:[Monitor] Monitor 050 Ring Det Mode:[Normal] Normal 001 Alarm Status:[Timer] Timer 051 ---------- 002 Stop Comm. JRNL:[On] On 052 Pulse Rate:[10pps] 10pps 003 Continuous Polling:[Off] Off 053 ---------- 004 Numeric ID Set:[On] On 054 ---------- 005 ---------- 055 Busy Tone Check:[On] On 006 ID Display:[Chara] Chara 056 ---------- 007 JRNL Column:[Station] Station 057 ---------- 008 Monitor:[Off] Off 058 Comm.JRNL +Image:[On] On 009 DC Loop:[Off] Off 059 ---------- 010 TX Level:[-11dBm] -11dBm 060 Version: UF-8000 BAT...... 011 RX Level:[-43dBm] -43dBm 061 TX/RX/PRT/CPY: 000080/000168/000003/000000 012 DTMF Level:[-5dBm] -5dBm 062 Print Counter:[Off] Off 013 G3 RX EQL:[0dB] 0dB 063 ---------- 014 G3 TX EQL:[0dB] 0dB 064 ---------- 015 --------- 065 ---------- 016 --------- 066 ---------- 017 TX Start:[14400bps] 14400bps 067 ---------- 018 RX Start:[14400bps] 14400bps 068 NYSE Fax Forward:[Off] Off 019 ITU-T V.34:[On] On 069 NYSE Local Print:[Inc] Inc 020 ITU-T ECM:[On] On 070 Line Error:[128] 128 021 EP Tone:[Off] Off 071 Total Error:[10] 10 022 Sig. Interval:[500ms] 500ms 072 Conti. Error:[Off] Off 023 TCF Check:[Normal] Normal 073 Error Detect:[Rate] Rate 024 CED Freq.:[2100Hz] 2100Hz 074 RTN Receive:[Discon] Discon 025 Comm. Start-Up:[1st] 1st 075 Coding:[JBIG] JBIG 026 Non-Standard:[On] On 076 Batch TX:[On] On 027 Short Protocol B:[On] On 077 RX JAM Length:[2 m] 2 m 028 Short Protocol D:[On] On 078 ---------- 029 Remote Diag.:[On] On 079 ---------- 030 CED & 300bps:[75ms] 75ms 080 Doc Top Feed:[0] 0 031 RTC=EQL x 12:[Off] Off 081 Doc End Feed:[0] 0 032 V34TX Start:[33600bps] 33600bps 082 JAM Length:[2 m] 2 m 033 V34RX Start:[33600bps] 33600bps 083 ---------- 034 V34 TX SR:[3429sr] 3429sr 084 Line As Nopaper:[Ring] Ring 035 V34 RX SR:[3429sr] 3429sr 085 ---------- 036 --------- 086 ---------- 037 Protocol Display:[Off] Off 087 Darker Level:[2] 2 038 --------- 088 Normal Level:[8] 8 039 Flash Time:[500ms] 500ms 089 Lighter Level:[14] 14 040 --------- 090 ---------- 041 Pause Time:[3sec] 3sec 091 ---------- 042 --------- 092 Smoothing:[On] On 043 Redial Interval:[3min] 3min 093 ---------- 044 Redial Count:[5] 5 094 ---------- 045 Ring Det. Count:[2] 2 095 Reduction Ratio:[100%] 100% 046 On-Hook Time:[5sec] 5sec 096 ---------- 047 Response Wait:[55sec] 55sec 097 ---------- 048 --------- 098 ---------- 049 --------- 099 ---------- Downloaded From ManualsPrinter.com Manuals
83 UF-7000/8000 NOV 2004 Ve r. 2 . 0 UF-7100/8100 Note: 1. The contents of the Function Parameter List may vary depending on the country’s regulations. 2. “ * ” mark will be shown on the left side of number when setting was changed from default. Function Parameter List (Sample) ************* -FUNCTION PARAMETER- ************* DATE MMM-dd-yyyy ***** TIME 12:07 ***P.02 -PANASONIC - ***** ****************** - - ****** -12345678901234567890- ***********100 ---------- 150 ---------- 101 ---------- 151 ---------- 102 ---------- 152 ---------- 103 ---------- 153 ---------- 104 ---------- 154 ---------- 105 ---------- 155 ---------- 106 ---------- 156 ---------- 107 ---------- 157 ---------- 108 ---------- 158 ---------- 109 ---------- 159 ---------- 110 MAC Address: 08002301D3E5 160 ---------- 111 ---------- 161 ---------- 112 Insert EMAIL TXT:[Off] Off 162 ---------- 113 ---------- 163 ---------- 114 ---------- 164 ---------- 115 Time Zone:[Direct] Direct 165 ---------- 116 Overwrite Warning:[Yes] Yes 166 ---------- 117 ---------- 167 ---------- 118 ---------- 168 ---------- 119 ---------- 169 ---------- 120 ---------- 170 ---------- 121 ---------- 171 ---------- 122 LDAP:[On] On 172 ---------- 123 ---------- 173 ---------- 124 ---------- 174 ---------- 125 ---------- 175 ---------- 126 ---------- 176 ---------- 127 ---------- 177 ---------- 128 ---------- 178 ---------- 129 ---------- 179 ---------- 130 ---------- 180 ---------- 131 ---------- 181 ---------- 132 ---------- 182 ---------- 133 ---------- 183 ---------- 134 ---------- 184 ---------- 135 ---------- 185 ---------- 136 ---------- 186 ---------- 137 ---------- 187 ---------- 138 ---------- 188 ---------- 139 ---------- 189 ---------- 140 ---------- 190 ---------- 141 ---------- 191 ---------- 142 ---------- 192 ---------- 143 ---------- 193 ---------- 144 ---------- 194 ---------- 145 ---------- 195 ---------- 146 ---------- 196 ---------- 147 ---------- 197 ---------- 148 ---------- 198 ---------- 149 ---------- 199 ---------- Note: The power must be reset for the new parameter settings to take effect. Downloaded From ManualsPrinter.com Manuals
84 UF-7000/8000 NOV 2004 Ve r. 2 . 0 UF-7100/8100 4.2.4.2. Page Memory Test A test pattern prints out for checking the page memory and printer mechanism using the following procedure. Press the “V”, ”/\” arrow keys to select the 3: Print Report/List on the display. ↓ Press the “SET” key to select the 1: Function Parameter List. ↓ Press the “V”, ”/\” arrow keys to select the 3: Page Memory Test. ↓ Press the “SET” key. ↓ Press the “STOP” key twice to exit the service mode. SC : TX/RX/PRT/CPY : 000123/000456/000789/000666 SC BOOT : MEMORY SIZE : (12MB) PNL : MAC ADDRESS : 08002301D3E5 PRINTER : SHIPMENT SET SCANNER(SDR) : FAX MODEM : SC2 : ************* TEST PATTERN PRINT **************** DATE MMM-dd-yyyy ***** TIME 12:07 ***P.01 -PANASONIC - ***** ****************** - - ****** -12345678901234567890- *********** Downloaded From ManualsPrinter.com Manuals
85
UF-7000/8000
NOV 2004 Ve r. 2 . 0
UF-7100/8100
4.2.4.3. Printer Report
All printer errors are logged on the Printer Report which can be printed by the following procedure.
Press the “V”, ”/\” arrow keys to select the 3: Print Report/List on the display.
↓
Press the “SET” key to select the 1: Function Parameter List.
↓
Press the “V”, ”/\” arrow keys to select the 4: Printer Report.
↓
Press the “SET” key.
↓
Press the “STOP” key twice to exit the service mode.
**************-PRINTER REPORT-********************* DATE MMM-dd-yyyy ***** TIME 19:02********
LAST PRINT ERROR : MMM-dd-yyyy 15:38 J00 00-00000016
SERIAL NUMBER :
CUSTOMER ID : 1234567890123456
PRINTER :
TRANSMIT COUNTER : 000475
RECEIVE COUNTER : 000398
COPY COUNTER : 000083
PRINT COUNTER : 000016
01.MMM-dd-yyyy 15:38 J00 00-00000016
02.MMM-dd-yyyy 10:48 J02 00-00000016 SC :
PNL :
SCANNER(SDR) :
-PANASONIC -
***** ******************* - - *******-12345678901234567890-**************
FIRMWARE VERSION
NO.DATE & TIME ERROR CODE RRROR COUNTNO.DATE & TIME ERROR CODE RRROR COUNT
--------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------
|
|
|
Downloaded From ManualsPrinter.com Manuals
86 UF-7000/8000 NOV 2004 Ve r. 2 . 0 UF-7100/8100 4.2.4.4. All Document Files Print the document files from the Flash Memory. Press the “V”, ”/\” arrow keys to select the 3: Print Report/List on the display. ↓ Press the “SET” key to select the 1: Function Parameter List. ↓ Press the “V”, ”/\” arrow keys to select the 5: All Document Files. ↓ Press the “SET” key. ↓ Press the “STOP” key twice to exit the service mode. Downloaded From ManualsPrinter.com Manuals
87
UF-7000/8000
NOV 2004 Ve r. 2 . 0
UF-7100/8100
4.2.4.5. Protocol Trace
Print a Protocol Trace Report for the previous communication.
Press the “V”, ”/\” arrow keys to select the 3: Print Report/List on the display.
↓
Press the “SET” key to select the 1: Function Parameter List.
↓
Press the “V”, ”/\” arrow keys select the 6: Protocol Trace.
↓
Press the “SET” key.
↓
Press the “V”, ”/\” arrow keys select the 1: L-1.
↓
Press the “SET” key.
↓
Press the “STOP” key twice to exit the service mode.
*************** PROTOCOL LOG. REPORT ****************** DATE MMM-dd-yyyy ***** TIME 16:56 *******
STATUS : OK
MODE : ECM-TX (STANDARD)
SPEED : 9600bps 0MS/L
REMOTE CAPA. : DIS 00 CE B9 C4 80 12
LOCAL CAPA. : TSI 2B 20 20 20 38 37 2B 2B 2B 2B
39 38 36 36 35 34 37 38 38 30
DCS 00 C6 F8 44
REMOTE : NSF CSI DIS CFR COMMAND LOG.
LOCAL : TSI DCS PIX PPS-EOP
REMOTE : MCF
LOCAL : DCN
-PANASONIC -
****************************-PANASONIC -*************-12345678901234567890-***************------------------------------------------------------------------
Downloaded From ManualsPrinter.com Manuals
88 UF-7000/8000 NOV 2004 Ve r. 2 . 0 UF-7100/8100 4.2.4.6. Toner Order Form The Toner Order Form can be printed out manually by the following procedure. Press the “V”, ”/\” arrow keys to select the 3: Print Report/List on the display. ↓ Press the “SET” key to select the 1: Function Parameter List. ↓ Press the “V”, ”/\” arrow keys to select the 7: Toner Order Form. ↓ Press the “SET” key. ↓ Press the “STOP” key twice to exit the service mode. Downloaded From ManualsPrinter.com Manuals
89
UF-7000/8000
NOV 2004 Ve r. 2 . 0
UF-7100/8100
Explanation of Contents
(1) Low Toner Message (Fixed) “The toner supply in your machine is running low”
(2) Dealer Name Up to 25 digits
(3) Toner Order Tel # Up to 36 digits
(4) Toner Order Fax # Up to 36 digits
(5) Customer ID Up to 16 characters (User Identification Code)
(6) Toner Cartridge No. Refer to the Supply list
*************************************
> TONER CARTRIDGE ORDER FORM <
*************************************
**** The toner supply in your machine is running low ****
(1)
To order a replacement Cartridge from your Authorized Dealer
Panasonic Corp.
(2)
by Phone: 1 201 111 5555 (3)by Fax: 1 201 111 4444 (4)
Thank you for your order.
Customer Name and Address
=========================
Ship to: Bill to:
Attention: Attention:
Phone No.: Phone No.:
Customer ID: ABC COMPANY (5)P.O. No.(if required):
Toner Cartridge No.: (6)Serial No.:
Quantity Required:
/ /
Print your name and title Signature & Date
Downloaded From ManualsPrinter.com Manuals
90 UF-7000/8000 NOV 2004 Ve r. 2 . 0 UF-7100/8100 4.2.5. Fax Service Mode 4 (Modem Test) 4.2.5.1. Binary Signal This Service Mode is used to check the binary signal output. Signals can be output to the line using the following procedure. Press the “V”, ”/\” arrow keys to select the 4: MODEM Test on the display. ↓ Press the “SET” key. ↓ Press the “V”, ”/\” arrow keys select the 1: LINE-1. ↓ Press the “SET” key to select the 1: Signal Test. ↓ Press the “SET” key. ↓ Press the desired number. ↓ Press the “SET” key. ↓ Press the “STOP” key twice to exit the service mode. Binary Signal Table Number Signals 1 V21 300bps 2 V27ter 2400bps 3 V27ter 4800bps 4 V29 7200bps 5 V29 9600bps 6 V17 TC7200bps 7 V17 TC9600bps 8 V17 12000bps 9 V17 14400bps Downloaded From ManualsPrinter.com Manuals