Panasonic UF 8100 YC User Manual

							61
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
4.1.4. F5 Mode: Function Parameters (For Copier)
Set the machine to Service Mode and press 5 key on the Keypad.
↓
Press the START key.
↓
Enter the desired code number or press “V”, ”/\” arrow keys.
↓
If you wish to select another code number, scroll the menu with the arrow keys.
↓
Press the SET key.
↓
Enter the desired function code number and press “SET” key.
↓
When the “CLEAR” key is pressed, the selected code input will not be accepted.
↓
Press “STOP” key, then press “FUNCTION” and “CLEAR” keys sequentially to exit the service mode.
↓
Reboot the machine after setting the parameter(s) to activate the setting(s).
F5 Mode
No. Item Function Default Setting
00 Not Used
01 Frequency Desired 0 : Auto
1 : 50 Hz
2 : 60Hz2 (for USA / Canada)
1 (for Europe)
02-03 Not Used
04 LSU Off Timer   1 :   5 sec.
  2 : 10 sec.
  3 : 15 sec.
  4 : 20 sec.
  6 : 30 sec.
  8 : 40 sec.
10 : 50 sec.
12 : 60 sec.3
05-09 Not Used
10 Exit Tray Limitation
(Up to 150 Sheets)0 : None
1 : Accumulate
2 : Job0
11-12 Not Used
13 Paper Out Indicator 0 : On
1 : Off0
14 Paper Size (Tray 1)
(UF-7000/8000)  4 : A4-R
12 : LEGAL
14 : LETTER-R
14 (for USA / Canada)
4 (for Europe / Others) Paper Size (Tray 1)
(UF-7100/8100)  4 : A4-R
  6 : B5-R
  8 : A5-R
12 : LEGAL
14 : LETTER-R
Downloaded From ManualsPrinter.com Manuals 
						

							62
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
15 Paper Size (Tray 2)
(UF-7000/8000)  4 : A4-R
12 : LEGAL
14 : LETTER-R
14 (for USA / Canada)
4 (for Europe / Others) Paper Size (Tray 2)
(UF-7100/8100)  4 : A4-R
  6 : B5-R
12 : LEGAL
14 : LETTER-R
16-37 Not Used
38 Duplex Mode Default 0 : No
1 : 1 to 2
2 : 2 to 20
39 Not Used
40 Double Count 0 : No
2 : LGL0
41 Count Up Timing 0 : At feed
1 : At exit1
42 KEY/DEPT. Counter 0 : No
2 : DEPT.0
43 Key Counter Timing Same as F5-41 0
44-49 Not Used
50 Auto Contrast Adj. 0 : No
1 : Yes1
51 Dept. Counter (COPY) 0 : No
1 : Yes1
52 Dept. Counter (FAX) 0 : No
1 : Yes0
53-58 Not Used
59 Oper. Add Toner Alarm 0 : Stop
1 : Continue0
60 Auto Tray Selection 0 : No
1 : Yes1
61-62 Not Used
63 U13 Clear
(UF-7100/8100 only)0 : Any keys
1 : Func + 10
64 Dept. Counter (SCANNER) 0 : No
1 : Yes0
65 Dept. Counter (PRINTER) 0 : No
1 : Yes0
66-68 Not Used
69 Reduce N in 1 Space 0 : No
1 : Yes0 F5 Mode
No. Item Function Default Setting
Downloaded From ManualsPrinter.com Manuals 
						

							63
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
70 PM Cycle   0 :     No
  1 :  1.5 K
  2 :  2.5 K
  3 :     5 K
  4 :   10 K
  5 :   15 K
  6 :   20 K
  7 :   30 K
  8 :   40 K
  9 :   60 K
10 :   85 K
11 :   90 K
12 : 120 K
13 : 150 K
14 : 200 K
15 : 240 K0 (for USA / Canada)
10 (for Europe / 
Others)
71-78 Not Used
79 Image Process Method 0 : Error Diffusion
1 : Dither0
80 Paper Size Priority   4 : A4-R
  5 : B5
  7 : A5
  9 : FLS1
10 : FLS2
12 : LEGAL
14 : LETTER-R14 (for USA / Canada)
4 (for Europe / Others)
81 Foolscap Size 1 : FLS1
2 : FLS21
82-83 Not Used
84 Paper Tray Priority 0 : S > C > B
1 : C > S > B1
85 Side Void Setting (ADF) 0 : No
1 : Yes0
86 PM Cycle (Optics) 0 : No
1 :  40 K
2 :  60 K
3 : 120 K
4 : 240 K
5 : 360 K
6 : 480 K
7 : 600 K0
87 PM Cycle (ADF) 0 : No
1 :  40 K
2 :  60 K
3 : 120 K
4 : 240 K
5 : 360 K
6 : 480 K
7 : 600 K0
88 USB Port Function 0 : Off
1 : Once
2 : On0 F5 Mode
No. Item Function Default Setting
Downloaded From ManualsPrinter.com Manuals 
						

							64
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
89 LAN Speed/Duplex 0 : Auto 
1 : 10 Half 
2 : 10 Full 
3 : 100 Half 
4 : 100 Full0
90 Beep Sound 0 : Off
1 : Soft
2 : Loud1
91-94 Not Used
95 Paper Size (FA) 
(Factory use only)0 : Japan
1 : USA/CAN
2 : Europe
3 : Other1 (for USA / Canada)
2 (for Europe)
96-97 Not UsedF5 Mode
No. Item Function Default Setting
Downloaded From ManualsPrinter.com Manuals 
						

							65
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
4.1.5. F6 Mode: Adjust Parameters (For Copier)
Set the machine to Service Mode and press 6 key on the Keypad.
↓
Press the START key.
↓
Enter the desired code number or press “V”, ”/\” arrow keys.
↓
If you wish to select another code number, scroll the menu with the arrow keys.
↓
Press the SET key.
↓
Enter the desired function code number and press “SET” key.
↓
When the “CLEAR” key is pressed, the selected code input will not be accepted.
↓
Press “STOP” key, then press “FUNCTION” and “CLEAR” keys sequentially to exit the service mode.
↓
Reboot the machine after setting the parameter(s) to activate the setting(s).
Note:
1. The Factory Setting is different in each model.
2. To change the input value +/-, press “” cursor keys. 
3. The machine may accept a (+/-) input value that exceeds the specified Setting Range for the 
parameters in the table; however, the actual registered value will not exceed the Upper/Lower  
Limitation value.
F6 Mode
No. Item RemarksSetting 
Range
00-03 Not Used
04 Printer Registration Delay time is adjusted from registration roller 
clutch ON.-50 - +16 
0.5mm
05-06 Not Used
07 Registration Void Registration void should be adjusted. 0 - +99 
0.5mm
08 Not Used
09 Trail Edge PRT Tim. Adjustment of trail edge void. -9 - +15 
0.5mm
10 Side Adjust (Bypass) Adjustment of LSU side-side (Sheet Bypass). -8 - +7 
0.5mm
11 Side Adjust (Tray 1) Adjustment of LSU side-side (1st Tray). -8 - +7 
0.5mm
12 Side Adjust (Tray 2) Adjustment of LSU side-side (2nd Tray). -8 - +7 
0.5mm
13-15 Not Used
16 Side Adjust (ADU) Adjustment of LSU side-side (ADU). -8 - +7 
0.5mm
17-38 Not Used
39 LSU Unit PWM Adjust Adjustment of PWM value of LSU. -32 - +32
40 Trans Current Side 1 Adjustment of Transfer Current. -77 - +76 
0.15uA
Downloaded From ManualsPrinter.com Manuals 
						

							66
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
41-43 Not Used
44 FAX Laser Duty Adj. Printer Density Adjustment for FAX. 
(-)  : Darker.
(+) : Lighter.-99 - +99
45 Not Used
46 PRT Laser Duty Adj. Printer Density Adjustment for Printer. 
(-)  : Darker.
(+) : Lighter.-99 - +99
47-48 Not Used
49 TEXT Image Density Image density adjustment for Text mode.
(-)  : Darker.
(+) : Lighter.-99 - +99
50 Not Used
51 PHOTO Image Density Image density adjustment for Photo mode.
(-)  : Darker.
(+) : Lighter.-99 - +99
52-53 Not Used
54 TEXT Mode Contrast Adjustment of Contrast for Text Mode. -128 - +127
55 Not Used
56 PHOTO Mode Contrast Adjustment of Contrast for Photo Mode. -128 - +127
57-68 Not Used
69 Stamp Position Adj. Adjustment of verification stamp position. -50 - +50 
0.3mm
70-90 Not Used
91 Original Lead ADF Adjustment of original detection timing. -99 - +99 
0.3mm
92 Original Trail ADF Adjustment of trail edge detection timing. -90 - 127 
0.3mm
93-98 Not Used
99 F5/F6 Initialize Initialize F5/F6 parameter settings.F6 Mode
No. Item RemarksSetting 
Range
Downloaded From ManualsPrinter.com Manuals 
						

							67
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
4.1.6. F7 Mode: Electronic Counter
Set the machine to Service Mode and press 7 key on the Keypad.
↓
Press the START key.
↓
Enter the desired code number or press “V”, ”/\” arrow keys.
↓
If you wish to select another code number, scroll the menu with the arrow keys.
↓
Press the SET key.
↓
Enter the desired function code number and press “SET” key.
↓
When the “CLEAR” key is pressed, the selected code input will not be accepted.
↓
Press “STOP” key, then press “FUNCTION” and “CLEAR” keys sequentially to exit the service mode.
↓
Reboot the machine after setting the parameter(s) to activate the setting(s).
F7 Mode
No. Item Remarks
01 Key Operator ID Code Key Operator’s identification code for access to the 
counter mode.
02 Total Count Total count for all copies / prints.
03 PM Count Preventive Maintenance count.
04-05 Not Used
06 OPC Drum Count PM count of recording paper fed through the OPC 
Drum.
07 Process Unit Count PM count of recording paper fed through the 
Process Unit.
08 ADF PM Count PM count of originals fed through the ADF.
09-10 Not Used
11 Sheet Bypass Count Total count of paper fed from the sheet bypass.
12 1st Paper Tray Count Total count of paper fed from the 1st paper tray.
13 2nd Paper Tray Count Total count of paper fed from the 2nd paper tray.
14-15 Not Used
16 2-sided Count Total count of 2-sided Print.
17 ADF Count Total count of originals fed through the ADF.
18 ADF Read Count Total count of originals scanned through the ADF.
19-20 Not Used
21 Copy Print Count Total count of copies printed.
22 Copy Scan Count Total count of copies scanned.
23 PC Print Count Total count printed from PC.
24 PC Scan Count Total count scanned to PC.
25 Fax Transmit Count Total count of Fax transmitted.
26 Fax Receive Count Total count of Fax received.
27 Fax Print Count Total count of Fax printed.
28-29 Not Used
30 A4R / LTR Count Total count of A4-R / Letter-R Print.
Downloaded From ManualsPrinter.com Manuals 
						

							68
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
4.1.7. F8 Mode: Service Adjustment
Set the machine to Service Mode and press 8 key on the Keypad.
↓
Press the START key.
↓
Enter the desired code number or press “V”, ”/\” arrow keys.
↓
If you wish to select another code number, scroll the menu with the arrow keys.
↓
Press the SET key.
↓
Enter the desired function code number and press “SET” key.
↓
When the “CLEAR” key is pressed, the selected code input will not be accepted.
↓
Press “STOP” key, then press “FUNCTION” and “CLEAR” keys sequentially to exit the service mode.
↓
Reboot the machine after setting the parameter(s) to activate the setting(s).31 Not Used
32 FLS / LG Count Total count of FLS / Legal Print.
99 All Counter Clear All counters are cleared.
F8 Mode
No. Item Remarks
00-05 Not Used
06 Error Log View a) Each time the arrow key is pressed, the machine 
errors or paper jam codes stored in memory are 
displayed, beginning with the oldest code.
Note:
Only the 30 most recent codes are displayed.
07 Error Log Clear a) Press the Reset key.
A Message Error code can be cleared with the 
Start key is displayed on the LCD.*
b) Press the Start key.
08-17 Not Used
18 C18 PRT PWM ADJ.PTN.
(LSU PWM Pattern)Print out the Test Pattern.
Proceed when the LSU is replaced.
19-46 Not Used
47 C47 ADF Scan Test Place the document on the ADF first.
Press START key to begin.
48-54 Not UsedF7 Mode
No. Item Remarks
Downloaded From ManualsPrinter.com Manuals 
						

							69
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
4.1.8. F9 Mode: Unit Maintenance
Set the machine to Service Mode and press 9 key on the Keypad.
↓
Press the START key.
↓
Enter the desired code number or press “V”, ”/\” arrow keys.
↓
If you wish to select another code number, scroll the menu with the arrow keys.
↓
Press the SET key.
↓
Enter the desired function code number and press “SET” key.
↓
When the “CLEAR” key is pressed, the selected code input will not be accepted.
↓
Press “STOP” key, then press “FUNCTION” and “CLEAR” keys sequentially to exit the service mode.
↓
Reboot the machine after setting the parameter(s) to activate the setting(s).
F9 Mode
Service 
ModeItem Remarks
F9 Unit 
Maintenance00 Fax Function Parameter
01 Service Alert Tel # Displays the contact number when a 
machine malfunction occurs.
02 Firmware
Vers i on00 SC Displays the firmware version for SC.
01 SC Boot Displays the firmware version for SC 
Boot.
02 PNL Displays the firmware version for PNL.
03 Scanner Displays the firmware version for SDR.
04 Printer Displays the firmware version.
05 FAX Modem Displays the firmware version for FAX.
06 G3B Board Displays the firmware version for G3B.
07 SC2 Displays the firmware version for Slot 1.
03 Print 
Device Info.00 F5/F6 Parameters Prints the memory contents of the F5 
and F6 modes.
01 Machine Information Prints the machine setup information list.
02 Counter Information Prints the Counter information list.
03 System Address 
Info.Prints the system memory setting.
04 RAM Address 
InformationPrints the RAM data dump list.
04 RAM Edit 
Mode1 Relative Address Setting of Relative address.
2 Absolute Address Setting of Real address.
05 Serial Number Registration of Serial Number for 
Maintenance.
Clears with Shipment Set.
Downloaded From ManualsPrinter.com Manuals 
						

							70
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
F9 Unit 
Maintenance06 RAM 
Initialize00 Parameter Initialize Resets the Fax and Function 
parameters to default values.
01 All Job Clear Clears all Jobs stored in Flash Memory.
02 LBP Error Log Clear Clears LBP Error log
03 Shipment Set Clears All Jobs, All Preset Data, 
Parameter Initialize & Resets the 
Counters (Fax).
04 LBP Fuser Reset Clears the LBP fuser error.
05 Dept. Counter Clear
06 Flash Memory Clear
07 Firmware
Update00 Update from Card
(SD Memory Card)Updates the firmware in the machine 
with the Master Firmware SD Memory 
Card.
01 Update from USB Updates the firmware in the machine 
using a PC via the USB port.
11 Parameter Backup Backup the Parameter.
12 Parameter Restore Restore the Parameter.
13 Page Memory Size Displays the page memory size (MB).
14 Sort Memory Size Displays the sort memory size (MB).
15 SD Card Format (SD Memory Card) Format the SD Memory Card.F9 Mode
Service 
ModeItem Remarks
Downloaded From ManualsPrinter.com Manuals