Panasonic UF 8100 YC User Manual

							31
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
SLOT 1. The Firmware (3) and (4) are assigned as ROM Code (C).
When using SD Memory Card (32 MB to 512 MB), the 8 MB Program (C) can be written onto one 
card.
C. 2nd G3 PC Board Firmware
The 4 MB Program Memory (F-ROM) is integrated on the 2nd G3 PCB. The Programs for 2nd 
Super G3 communication protocol Control is saved on the Board. The Firmware is transferred as 
Serial Data from the SC PCB.
D. Firmware Updating Ports
Three (3) types of Ports are available for updating the firmware.
(1) Ethernet LAN Port (The Quick and Easy Method)
The machines Firmware can be updated using a PC via Local Area Network (LAN). Refer to the 
Firmware Update Operation Instructions.
(2) USB Port (Alternate)
The machines Firmware can be updated using a PC via USB Port. 
Refer to the Firmware Update Operation Instructions.
(3) SD Memory Card (New Method)
The machines Firmware can be updated using the Master SD Memory Card. The Master SD 
Memory Card can be created by copying the Firmware from the Web site using the SD Memory 
Firmware Writing Tool Software and a PC with SD Memory Card Slot or with an SD Memory Card 
Reader & Writer. 
To update the SC PCB and 2nd G3 PCB, just one Master SD Memory Card (if the Card includes all 
necessary firmware codes) is required for the Standard or all option configurations, which includes 
the PCL and the 2nd G3 Fax. The easiest way is to use “Auto Mode” for updating all necessary 
firmware at once.
Note:
If the SD Memory Card will be used to update the Firmware of other machines, format the Card first 
with the Service Mode F9-15. Refer to 2.5.6. (Formatting the SD Memory Card)
Web site
- Firmware Code
- SD Memory Card Firmware Writing Tool
Download 
Create the Master SD Memory Card using a PC
Update the Firmware using the Master SD Memory Card
(Selecting Auto Mode updates all necessary firmware at once.)
Downloaded From ManualsPrinter.com Manuals 
						

							32
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
2.5.2. Updating through a LAN Port (The Quick and Easy Method)
The firmware code can be easily updated when the main unit is connected to a LAN. 
The Network Firmware Update Tool can also be used by connecting to the machine using a crossover 
cable, if the unit is not connected to a LAN.
1) Install the Network Firmware Update Tool to your PC
The option CD-ROM includes the Network Firmware Update Tool and the Main Unit Firmware Code. 
Please refer to the following Operating Instructions to install the Network Firmware Update Tool. 
The installation password is workio.
Operating Instructions:
\xFirmware\Tools\NwFirmup\NwFirmup OI.pdf (Refer to the NW Firmware Update Tool OI
 on the CD)
Setup:
\xFirmware\Tools\NwFirmup\Setup\Setup.exe
2) Preparing the Firmware Code
Double click the appropriate Destination Shortcut Batch File and copy the Firmware Code File on the 
CD-ROM to the Firmware Data Folder in your PC. Note that the files in the Archive will be extracted 
automatically into the designated folder when the Archived file (.exe) is Double-clicked.
Example:
From:
Destination Shortcut Batch File:  D:(CD-ROM Drive)  xFirmware  USA.bat
Firmware Code File: UF-8000_AU_xxxxxx.exe or UF-7000_AU_xx_xxxxxx.exe
To :
Firmware Data Folder:  C: Panasonic  Panasonic-FUP  Data
3) Preparing the Main Unit for the Firmware Upgrade
Make sure the units Key Operator Password is the same as the tools password.
Make sure the unit is in an idle state (e.g. not making copies, not printing, etc.).
4) Upgrading the Main Units Firmware Code
Start the Network Firmware Update Tool and select the following Firmware Code Folders in the 
C:\Panasonic\Panasonic-FUP\Data folder, and then follow the display instructions to upgrade the 
Main Units Firmware Codes.
Parent Firmware File Folder Sub Firmware File Folder
 UF-8000_AU_xxxxxx or
 UF-7000_AU_xxxxxx SC_STD  UF-8000AxVxxxxx_xx
 SC_PCL  UF-8000BxVxxxxx_xx
 fcb  UF-8K_G3BAAVxxxxx_xx  (UF-8000/8100)
When you select the Parent Folder, the following 
Firmware Type window appears. Proper Sub File Folders 
are selected automatically by selecting the Firmware 
Ty pe .
The transferring order is set up automatically.
Downloaded From ManualsPrinter.com Manuals 
						

							33
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
Note:
1. Manual mode must be used, when updating the designated version of the firmware or changing 
the type of the firmware. 
Please refer to the Section 2.2, Setting up the Network Firmware Update Tool, File Selection 
Ta b of the Operating Instructions.
2. While updating the firmware code, the display may become garbled, however, it will return to 
normal upon completion of the firmware update.
3. If the firmware update fails and the unit does not boot up, the Network Firmware Update Tool will 
not be able to transfer the firmware code. If this occurs, please refer to the next section 
Updating through the USB Port and use the Local Firmware Update Tool to recover the unit.
4. The suffix _xx for the Folder Name or File Name may not exist depending on the destination 
location.
2.5.3. Updating through USB Port (Alternate Method)
If the device is not connected to the LAN, upgrade the firmware code using the USB Port.
1) Install the Local Firmware Update Tool to your PC
The option CD-ROM includes the Local Firmware Update Tool and the Main Unit Firmware Code. 
Please refer to the following Operating Instructions to install the Local Firmware Update Tool.
Operating Instructions:
\xFirmware\Tools\Firmup\FIRMUP OI.pdf (Refer to the Local Firmware Update Tool OI
 on the CD)
Setup:
\xFirmware\Tools\Firmup\Setup\Setup.exe
2) Preparing the Firmware Code
Double click the appropriate Destination Shortcut Batch File and copy the Firmware Code File on the 
CD-ROM to the Firmware Data Folder in your PC. Note that the files in the Archive will be extracted 
automatically into the designated folder when the Archived file (.exe) is Double-clicked.
Example:
From:
Destination Shortcut Batch File:  D:(CD-ROM Drive) \ xFirmware  USA.bat
Firmware Code File: UF-8000_AU_xxxxxx.exe or UF-7000_AU_xx_xxxxxx.exe
To :
Firmware Data Folder:  C: Panasonic  Panasonic-FUP \ Data
3) Preparing the Main Unit for the Firmware Upgrade
Important: DO NOT connect the USB Cable yet.
Enter into Test Mode F9-07-01 to enable the unit to accept the programming code from the USB Port.
Now connect the USB Cable between the Unit and PC.
Repeat the above steps if there are additional firmware code files to be updated.
Downloaded From ManualsPrinter.com Manuals 
						

							34
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
4) Upgrading the Main Units Firmware Code
Start the Local Firmware Update Tool and select the following Firmware Code Parent File Folder in 
the C:\Panasonic\Panasonic-FUP\Data folder, and select the Firmware Code Type then follow the 
display instructions to upgrade the Main Units Firmware Codes. 
You must process each firmware file separately in this manner and sequence.
Note:
1. While updating the firmware code, the display may become garbled, however, it will return to 
normal upon completion of the firmware update.
2. Please refer to the service manual for additional details.
3. The suffix _xx for the Folder Name or File Name may not exist depending on the destination 
location.
2.5.4. Updating the Firmware using the Master Firmware SD Memory Card
Caution:
Do not remove the SD Memory Card or turn the power OFF during Formatting or while Updating the 
Firmware.
Note:
1.  When a New (Blank) SD Memory Card is detected for the first time, a prompt for Formatting will 
appear on the LCD. The machine will format the SD Card for DATA (used for Fax Image, 1,000 Station 
Auto Dialer, JOB MIB Data, etc.), and it takes approximately 3 to 12 min. to format depending on the 
manufacturer, SD Memory Card size or Data Access Speed of the SD Card.
2. To Update the Firmware or to Format an SD Memory Card using the F9-15 Service Mode takes 
approximately 5 sec. Refer to 2.5.6. (Formatting the SD Memory Card).
1) When a DATA SD Card is Not installed
1. Before starting, print the F5/F6 Parameters List (Copy Service Mode F9-03-00).
2. Turn the Power Switch on the back of the machine to the OFF position. (During a Lightning Storm, 
to prevent electrocution disconnect the Telephone Line Cable first before unplugging the AC Power 
Cord.)
3. Disconnect the Telephone Line, LAN and/or USB Cables.
4. Install the appropriate Master Firmware SD Memory Card into the machine.
5. Turn the Power Switch on the back of the machine to the ON position.
6. Press “FUNCTION”, “ORIGINAL SIZE” keys and then Key “3” on the keypad sequentially.
7. Perform the Copy Service Mode F9-07-00 (Update From Master SD Card).
8. The firmware is copied into the machine. 
Selecting the Auto Mode, copies all the necessary firmware at once.
9. After the update is completed, the machine reboots itself and returns to standby.
10. Turn the Power Switch on the back side of the machine to the OFF position.
Parent Firmware File Folder Sub Firmware File Folder Firmware File
 UF-8000_AU_xxxxxx or
 UF-7000_AU_xxxxxx SC_STD  UF-8000AxVxxxxx_xx UF-8000AxVxxxxx_xx.bin
 SC_PCL  UF-8000BxVxxxxx_xx UF-8000BxVxxxxx_xx.bin
UF-8000CxVxxxxxa_xx.bin
UF-8000CxVxxxxxb.bin
 fcb  UF-8K_G3BAAVxxxxx_xx 
UF-8K_G3BAAVxxxxx_xx.bin
 (UF-8000/8100)
When you select the Parent Folder, the following Firmware 
Type window appears. Proper Firmware Files are selected 
automatically by selecting the Firmware Type.
The transferring order is set up automatically.
Downloaded From ManualsPrinter.com Manuals 
						

							35
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
11. Remove the Master Firmware SD Memory Card from the machine.
12. Reconnect the Telephone Line, LAN and/or USB Cables.
13. Turn the Power Switch on the back of the machine to the ON position.
14. Reprogram the F5 & F6 Parameters according to the lists printed in Step 1 above if the settings are 
other than factory default.
2) When a DATA SD Card is installed
1. Before starting, print the F5/F6 Parameters List (Copy Service Mode F9-03-00).
2. Turn the Power Switch on the back of the machine to the OFF position. (During a Lightning Storm, 
to prevent electrocution disconnect the Telephone Line Cable first before unplugging the AC Power 
Cord.)
3. Disconnect the Telephone Line, LAN and/or USB Cables.
4. Remove the DATA SD Card from the machine.
5. Install the appropriate Master Firmware SD Memory Card into the machine.
6. Turn the Power Switch on the back of the machine to the ON position.
7. Press “FUNCTION”, “ORIGINAL SIZE” keys and then Key “3” on the keypad sequentially.
8. Perform the Copy Service Mode F9-07-00 (Update From Master SD Card).
9. The firmware is copied into the machine. 
Selecting the Auto Mode, copies all the necessary firmware at once.
10. After the update is completed, the machine reboots itself and returns to standby.
11. Turn the Power Switch on the back side of the machine to the OFF position.
12. Remove the Master Firmware SD Memory Card from the machine.
13. Reinstall the DATA SD Card into the machine.
14. Reconnect the Telephone Line, LAN and/or USB Cables.
15. Turn the Power Switch on the back of the machine to the ON position.
16. Reprogram the F5 & F6 Parameters according to the lists printed in Step 1 above if the settings are 
other than factory default.
Note:
After the update is completed, the machine reboots itself and returns to standby mode.
Selecting the Auto Mode, prompts the unit to check the configuration and installed options, and all 
the necessary firmware is updated automatically.
Confirm that the update was successfully completed by checking the Firmware Version with F9 
Parameters F9-02-xx.
Caution:
If the unit does not boot up properly in Step 8, refer to 2.5.7. (Firmware Emergency Recovery)
2.5.5. Creating a Master Firmware SD Memory Card using a PC
1) Install the “SD Memory Card Firmware Writing Tool” to your PC. 
The “SD Memory Card Firmware Writing Tool” can be downloaded from your sales company’s Web 
Site. Please refer to the Readme file for additional details.
2) Preparing the Firmware Code
Double click the appropriate Destination Shortcut Batch File and copy the Firmware Code File on the 
CD-ROM to the Firmware Data Folder in your PC. Note that the files in the Archive will be extracted 
automatically into the designated folder when the Archived file (.exe) is Double-clicked.
Example:
From:
Destination Shortcut Batch File:  D:(CD-ROM Drive) \ xFirmware  USA.bat
Firmware Code File: UF-8000_AU_xxxxxx.exe or UF-7000_AU_xx_xxxxxx.exe
To :
Firmware Data Folder:  C: Panasonic  Panasonic-FUP \ Data
Downloaded From ManualsPrinter.com Manuals 
						

							36
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
3) Preparing the Master Firmware SD Memory Card
1. Insert the SD Memory Card (32 MB to 512 MB) into the SD Memory Card Slot.
2. Perform the SD Memory Card Firmware Writing Tool.
3. After all firmware codes are copied, remove the SD Memory Card from the Slot.
The SD Memory Card is now ready to use for firmware update.
(Refer to the Local Firmware Update Tool OI on the CD and the SD Memory Card Firmware Writing 
Tool OI.)
2.5.6. Formatting the SD Memory Card
To make the Master Firmware SD Card, format the Card first by following the steps below. If the Card will be 
used to update the Firmware of other machines, format the Card first with the Service Mode F9-15.
Caution:
Do not remove the SD Memory Card or turn the power OFF during Formatting or while Updating the 
Firmware. 
Note:
The Master Firmware SD Card can be installed or removed without turning the power OFF, 
however, an SD Memory Card formatted for DATA requires the power to be cycled OFF and ON 
after its installation or removal.
1) When a DATA SD Card is Not installed
1. Turn the Power Switch on the back of the machine to the OFF position. (During a Lightning Storm, 
to prevent electrocution disconnect the Telephone Line Cable first before unplugging the AC Power 
Cord.)
2. Disconnect the Telephone Line, LAN and/or USB Cables.
3. Turn the Power Switch on the back of the machine to the ON position.
4. Press “FUNCTION”, “ORIGINAL SIZE” keys and then Key “3” on the keypad sequentially.
5. Enter the Service Mode F9-15 (SD Card Format).
6. Install the SD Card into the machine.
7. Perform the Service Mode F9-15 (SD Card Format).
8. After the SD Card is formatted, the machine goes to Service Mode F9.
9. Remove the SD Memory Card from the machine.
10. Press STOP first and then press FUNCTION + CLEAR keys sequentially to return to standby.
11. Turn the Power Switch on the back of the machine to the OFF position.
12. Reconnect the Telephone Line, LAN and/or USB Cables.
13. Turn the Power Switch on the back of the machine to the ON position.
Note:
Repeat steps 5 to 9 to continue formatting other SD Card(s).
2) When a DATA SD Card is installed
1. Turn the Power Switch on the back of the machine to the OFF position. (During a Lightning Storm, 
to prevent electrocution disconnect the Telephone Line Cable first before unplugging the AC Power 
Cord.)
2. Disconnect the Telephone Line, LAN and/or USB Cables.
3. Turn the Power Switch on the back of the machine to the ON position.
4. Press “FUNCTION”, “ORIGINAL SIZE” keys and then Key “3” on the keypad sequentially.
5. Remove the DATA SD Card from the machine.
6. Enter the Service Mode F9-15 (SD Card Format).
7. Install the SD Card into the machine.
8. Perform the Service Mode F9-15 (SD Card Format).
9. After the SD Card is formatted, the machine goes to Service Mode F9.
10. Remove the SD Memory Card from the machine.
11. Reinstall the DATA SD Card into the machine.
Downloaded From ManualsPrinter.com Manuals 
						

							37
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
12. Press STOP first and then press FUNCTION + CLEAR keys sequentially to return to standby.
13. Turn the Power Switch on the back of the machine to the OFF position.
14. Reconnect the Telephone Line, LAN and/or USB Cables.
15. Turn the Power Switch on the back of the machine to the ON position.
Note:
Repeat steps 6 to 10 to continue formatting other SD Card(s).
2.5.7. Firmware Emergency Recovery
The easiest method to recover the firmware in an Emergency Recovery routine is to use the Master SD 
Memory Card method (1 SD Memory Card required if the SD Memory Card capacity is Large enough 
size for all necessary Firmware).
If the Master SD Memory Card includes all necessary firmware as a package, all necessary firmware can 
be recovered once which including PCL option configurations, except the 2nd G3 Fax option.
After recovering, if optional 2nd G3 firmware is required, use the Network Firmware Update Tool, the 
Local Firmware Update Tool or use the Master SD Memory Card to update the firmware selecting the 
“Auto Mode” to the required level.
If the unit does not boot up properly, follow the steps below:
1. Turn the power OFF.
Before proceeding to the next step, you must create the Master SD Memory Card (read the 
appropriate sections first 2.5.5).
2. Turn the power On while holding the [ENERGY SAVER] button.
3. When the green lamp on the front panel turns On, release the [ENERGY SAVER] button.
The unit is now ready to accept the firmware code from Master SD Memory Card.
If there is additional 2nd G3 firmware code file to be updated, use the Master SD Memory Card to update 
the firmware using the “Auto Mode” again.
2.5.8. Firmware Version
SC :UF-8000 or 7000A A Vxxxxx AU
Destination Code (Fax)
 AU : USA/Canada
 EB : UK etc.
Firmware Version (V1xxxx)
Language Code
  A : A-English, C-French & Spanis
h
Firmware Type
 A : Standard
 B, C : Optional
Model Numberetc.
(a)
Division Soft 
(When it is divided into (a) and (b)
)
UF-8100 or 7100
Downloaded From ManualsPrinter.com Manuals 
						

							38
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
2nd G3 :            UF-8K  G3B  A A Vxxxxx  YC
Firmware Version (V1xxxx)
AA: Fixed
2nd G3
Model Number
YC: Fixed
Downloaded From ManualsPrinter.com Manuals 
						

							39
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
2.6. Adjusting the Printer Registration, LSU Image Side to Side
When installing the Paper Tray option, the following LSU Image Side to Side adjustment may be required.
The Printer registration is adjusted at the factory. 
If copy image is abnormal, especially in the Rotation Copy mode, adjust it by the following procedure.
2.6.1. Printer Registration 
1. Insert Letter or A4 size paper into the 1st tray and change the tray setting to the appropriate paper 
size. Empty all the remaining trays (including the bypass tray) to disable them.
2. Press “FUNCTION”, “ORIGINAL SIZE” keys and then Key “3” on the keypad sequentially.
3. Perform the Service Mode F1-03 (Print Test Pattern 1).
4. Check the gap of the print pattern from the paper edge, refer to the Figure below.
5. Perform the Service Mode F6-04 (Printer Registration) to adjust the gap to be 5 mm.
6. If the gap is less than 5 mm, input a (-) value. If more than 5 mm, input a (+) value.
7. Press STOP first and then press FUNCTION + CLEAR keys sequentially to return to standby.
2.6.2. LSU Image Side to Side Adjustment for the Tray
1. Insert Letter or A4 size paper into the 1st tray and change the tray setting to the appropriate paper 
size. Empty all the remaining trays (including the bypass tray) to disable them.
Note:
Do not pull out the 1st tray to disable it when adjusting the 2nd tray. The 1st tray is required as it acts 
as a paper path for the paper in the 2nd tray.
2. Press “FUNCTION”, “ORIGINAL SIZE” keys and then Key “3” on the keypad sequentially.
3. Perform the Service Mode F1-03 (Print Test Pattern 1).
4. Check the gap of the print pattern from the paper edge, refer to the Figure above.
5. Perform the Service Mode F6-10 to F6-12, to adjust the gap to be 5 mm.
6. If the gap is less than 5 mm, input a (+) value. If more than 5 mm, input a (-) value.
7. Proceed the above steps for other Tray.
8. Press STOP first and then press FUNCTION + CLEAR keys sequentially to return to standby.

Two lines are printed on the top (Lead edge).
For Letter or A4, place as Portrait.
5 mm
Top (Lead edge)
     Two lines are printed
5 mm          5 mm
Two lines are printed
Downloaded From ManualsPrinter.com Manuals 
						

							40
UF-7000/8000
NOV 2004 Ve r.  2 . 0
UF-7100/8100
2.6.3. LSU Image Side to Side Adjustment for the ADU
1. Insert Letter or A4 size paper into the 1st tray and change the tray setting to the appropriate paper 
size. Empty all the remaining trays (including the bypass tray) to disable them.
2. Press “FUNCTION”, “ORIGINAL SIZE” keys and then Key “3” on the keypad sequentially.
3. Perform the Service Mode F1-06 (Print Test Pattern 4).
4. Check the gap of the print pattern from the paper edge, refer to the Figure above.
5. Perform the Service Mode F6-16 (ADU Side Adjust), to adjust the gap to be 5 mm.
6. If the gap is less than 5 mm, input a (+) value. If more than 5 mm, input a (-) value.
7. Press STOP first and then press FUNCTION + CLEAR keys sequentially to return to standby.
2.6.4. ADF Original Read Edge & ADF Main Scan Adjustments
1. Place the Original Document on the ADF.
2. Insert Letter or A4 size paper into the 1st tray and change the tray setting to the appropriate paper 
size. Empty all the remaining trays (including the bypass tray) to disable them.
3. Press “FUNCTION”, “ORIGINAL SIZE” keys and then Key “3” on the keypad sequentially.
4. Perform the Service Mode F2 (Single Copy Test).
5. Check the Image size of the Copy and the Original as Portrait.
6. Perform the Service Mode F6-91 (Original Read Edge ADF), to adjust the ADF Original Read Edge.
7. If the gap is less than the Original, input a (+) value. If bigger than the Original, input a (-) value.
8. Perform the Service Mode F6-90 (ADF Image Read Start), to adjust the ADF Main Scan for Side 
position.
9. If the gap is less than the Original, input a (+) value. If bigger than the Original, input a (-) value.
10. Press STOP first and then press FUNCTION + CLEAR keys sequentially to return to standby.
Downloaded From ManualsPrinter.com Manuals