Panasonic Uf 7200 Operating Instructions Manual

161
Customizing Your Machine
Setting Your Machine
Continued on the next page...
12
NOTE
1. The setting numbers marked with an asterisk (*) indicate the factory default setting.
2. 2:Valid can be selected when the SMTP server  or the POP server support these capabilities.
No. Parameter
162 TIFF VIEWER URL 1 None Selecting whether to include the URL address in the Email 
message body.
*2 English
3 English+  Japanese
163 ROUTING HEADER *1 Invalid Selecting whether to add the Header Print information of the...

162
Customizing Your Machine
12
NOTE
1. The setting numbers marked with an asterisk (*) indicate the factory default setting.
2. 2:Valid can be selected when the SMTP server or the POP server support these capabilities.
No. Parameter
174 APOP AUTHENTI.
(See Note 2) *1 Invalid This parameter allows you to encrypt the protocol for the POP 
password security when connecting with the POP server.
2Valid
177 XMT FILE TYPE   1 TIFF
Selecting whether the document( s) are converted to TIFF-F or 
PDF format when...

163
Customizing Your Machine
Setting Your Machine
Continued on the next page...
Setting the Copier Parameters
„Copier Settings
The Following Parameter Settings Require  the Input of the Key Operator ID:
12When selecting the Key Operator Mode. (See page 136)
Copier Parameters
1  
2
Setting the desired Function Parameter to use   or   or the 
Number Pad.
Ex:09
3
Select the setting and press  .
4
To return to standby, press  . (2 times)
No. Modes FunctionInitial Setting
09 AUTO EXPOSURE Set the auto...

164
Customizing Your Machine
„Copier Settings (For Key Operator)
3
Enter the Key Operator ID using  the Number Pad, then press  .
4
Setting the desired Function Parameter to use   or   or the 
Number Pad.
Ex:01
5
Select the setting and press  .
6
To return to standby, press  . (2 times)
No. Modes FunctionInitial Setting
00 COPY SETTING LIST Prints the copier settings list.
PRESS SET TO PRINT
01 HALFTONE (HOME) Selects the default Halftone setting. 1:OFF / 2:ON 1:OFF
02 CONTRAST Selects the contrast...

165
Customizing Your Machine
Setting Your Machine
Setting the Scan Parameters
„Scanner Settings
Scan Parameters
1  
2 
3 
4
Setting the desired Function Parameter to use   or   or the 
Number Pad.
Ex: 2
5
Select the setting and press  .
6
To return to standby, press  . (2 times)
No. Modes FunctionInitial Setting
00 SCANNER SETTINGS Prints the scanner settings.
PRESS SET TO PRINT
02 COMPRESSION MODE Sets the default compression mode setting. 1:MH / 2:MR / 3:MMR / 4:JBIG 3:MMR
03 RESOLUTION Sets the...

166
Customizing Your Machine
The Following Parameter Settings Require the Input of the Key Operator ID:
When selecting the Key Operator Mode. (See page 136)
„ Scanner Settings (For Key Operator)
1  
2 
3 
4
5
Enter the Key Operator ID using  the Number Pad, then press  .
6
 
7
Select the setting and press  .
8
To return to standby, press  . (2 times)
No.Modes FunctionInitial Setting
01 ABBR GROUP ID Selects the ABBR. Group ID settings.
0-99 0
FUNCTION       (1-2)
ENTER NO. OR   
SET MODE       (1-2)...

167
Customizing Your Machine
Setting Your Machine
Continued on the next page...
Setting the Printer Parameters
„Printer Settings
The Following Parameter Settings Require  the Input of the Key Operator ID:
When Selecting the Key Operator Mode.  (See page 136)
Printer Parameters
1 
2 
3
Setting the desired Function Parameter to use   or   or the 
Number Pad.
Ex: 04
4
Select the setting and press  .
5
To return to standby, press  . (2times)
No. Modes FunctionInitial Setting
04 PRINT DATA Determines the...

168
Customizing Your Machine
„Printer Settings (For Key Operator)
5
Setting the desired Function Parameter to use   or   or the 
Number Pad.
Ex: 00
6
Select the setting and press  .
7
To return to standby, press  .
To return to standby after setting the Printer Settings for Key 
Operator, Parameter No .01 (COMPLETION TIME),
press .(2 times)
No. Modes FunctionInitial Setting
00 PRINTER SETTINGS Prints the printer settings.
PRESS SET TO PRINT
01 COMPLETION TIME Sets the job completion time setting. 180SEC...

169
Setting Your Machine
Changing the Default Setting
The Paper Trays are designed to accommodate Letter, A4 and Legal Size paper.
Changing the Paper Size (Paper Tray)
1
Changing the Paper Size
1
2
  
3
Enter the Key Operator ID using  the Number Pad, then press  .
4  
5
6
Use   or   to select the paper size,   then 
press .
7
LETTER / A4 size only / Tray-1
To select paper type (1:PLAIN / 2:OHP), then press  .
When the optional 2nd Paper Feed Module (TRAY-2) is installed, 
press   once and repeat Steps 6...

170
Changing the Default Setting
Changing the Paper Guide from Letter to A4
1Push down the bottom plate of the tray until it 
stops.
2Press the lower two tabs of the Paper Guide 
inward and pull out the Paper Guide. Align the 
Paper Guide with the A4-size paper holes and 
snap the Paper Guide into place as illustrated 
below.
3Press the two outside tabs of the Paper Guide 
inward to pull out the  Paper Guide. Slide the 
Paper Guide to the A4-size paper hole and 
snap the Paper Guide into place.
4Change...