Panasonic Uf 6950 Operating Instructions Manual

91
Setting 
Your Machine
QUsing a PC to Input the Internet Parameters Remotely
This feature provides a convenient and an easy way to input the Internet Parameters right from your PC by sending a 
text email message to your machine.
The following parameters can be input remotely via a PC. The other parameters must be entered from the machine in 
the User Parameters
 (see page 28).
• Sender Selection (up to 24 User Names, see page 54)
• Default Domain
• Selectable Domains (up to 10 additional Domain...

92
Setting Your Machine
Programming or Retrieving Parameters via Email
QTo Retrieve Each Parameters
To retrieve the existing parameters, send a plain text email to your machines email address with the following 
command in the Subject line:
[Ex: Internet Parameters]
Using Email to Retrieve the Journal
The Journal will be sent back to the originating station’s email address.
After receiving the journal, use a fixed width font (i.e. Courier), in order to align the received journal’s contents on the PC....

93
Setting 
Your Machine
QTo Edit the Retrieved or Backup Internet Parameters/Auto Dialer File
After receiving your machine’s email with the Internet Parameters and/or Auto Dialer, store the email file as text (.txt) on 
your PC for backup purposes.
To change or update the Internet Parameters and/or Auto Dialer, type the following command in the Subject line of 
your email
, and follow the steps below:
1. Create a New Email Message, fill out the To, and From Address line and the Subject line information...

94
Setting Your Machine
To Edit the Retrieved or Backup Internet Parameters File
Your Machine’s Internet Parameters Email Sample
(1)To:Your machines email address.
From:This field is normally not visible when creating new email message(s).
It is your default email address (email application), for retrieving the Internet 
Parameters and for error message notification.
(Can be programmed with the configuration tool of your email program.)
Subject:To Store data, type: #set parameters(password)#
(1)
(2)
(3)...

95
Setting 
Your Machine
(2)@sender to @end:Defines the Sender information to be set in section (2) between @sender to @end 
block.  Edit, Delete or Register up to 24 User Names and their Email Addresses for 
the Sender Selection feature
 (see page 54).
Separate each data field with a semicolon (;). (If the remaining fields are to remain 
blank, insert a semicolon (;) for each blank field
.)
The data string for each Sender Selection should be defined within a single line.
The syntax is:  ;;
(a) 01 to 24:...

96
Setting Your Machine
To Edit the Retrieved or Backup Auto Dialer Data File
Your Machine’s Address Book (Auto Dialer) Email Sample
(1) To : Your machines email address.
From : This field is normally not visible when creating new email message(s).
It is your default email address (email application), for retrieving the Auto Dialer  
data and for error message notification.
(Can be programmed with the configuration tool of your email program.)
Subject : To Store data, type: #set abbr(password)#
From:...

97
Setting 
Your Machine
NOTE1. The email address and the telephone number cannot be programmed via email when:
• Auto Dialer Number has been used for communication reservation.
• Received documents are stored in the image data memory of the machine.
• While the machine is communicating or printing.
2. When the email address, and telephone number are programmed via email, a program result 
email is sent back.
3. Some email applications automatically insert a line feed in the middle of a line when the...

98
Setting Your Machine
To Edit the Retrieved or Backup Auto Dialer Data File
QDeleting the Entire Auto Dialer
If you wish to delete the entire Auto Dialer data in your machine, type the following command in the body of the email 
message:
@command
delete
@end
This command can also be inserted before the @begin to @end block, to erase the entire Auto Dialer data first, then 
reprogram it with new data.
This method will also prevent the Overwrite Warning Message that is sent back from your machine, when...

99
memo
Setting 
Your Machine 

100
Network Scanner
Document Scanning
QDocument Scanning via LAN
NOTE1. Auto Dialer (Address Book or One-Touch/ABBR.) is only available when stations are 
registered (see pages 
102 to 105).
Selecting the Scanning Resolution
150 dpi
300 dpi
600 dpi
Halftone (300 dpi)
Halftone (600 dpi)
Selecting the scanning contrast
CONTRAST
-[]]]]]]]+
UF-7950
RESOLUTION
UF-7950
A
CONTRAST
 :Lighter      :Darker
When the Panasonic Document 
Management System (Panasonic-DMS) is 
installed, and configured on your PC,...