Panasonic Uf 6950 Operating Instructions Manual

101
Network Scanner
NOTE2. If the PC’s IP Address is not shown on the LCD of your machine, register the PC’s IP Address 
using your machine’s Control Panel (see page 
102).
3. You can search for another name starting with the same character by scrolling with the Cursor 
Keys (
/).
43a
UF-7950
Quick Name Search Addressing (See Note 1)
(When Fax Parameter No.119 is set to 2:Quick Name Search, see page 86.)
START
The document(s) is stored into 
memory. Then starts scanning 
the document(s).
SALES 3...

102
Network Scanner
Auto Dialer
QAdding your PCs IP Address
If the Scanner Configuration is not set with the Panasonic Communications Utility of Panasonic-DMS software (refer to 
Panasonic-DMS CD), input your PC’s IP Addresses using the machine’s Keypad.
UF-7950
SET
UF-7950
23
SET
1
When inputting a special character, 
press the   key, and use the  /
Cursor Keys to the desired character.
When changing the stored character, move 
the cursor (
]) back to the character, and press 
 key, then input a new...

103
Network Scanner
For ONE-TOUCH
For ABBR No.
5
STOP
(2 times)
SET
For QUICK NAME SEARCH
(When Fax Parameter No. 119 is set to 
2:Quick Name Search, see page 86.)
6
IP ADDRESS    
]
SET
0-9, *
ONE-TOUCH <   >
PRESS ONE-TCH OR 
∨ ∧For ONE-TOUCH/ABBR. NO.
(When Fax Parameter No. 119 is set to 
1:One-Touch, see page 86.)
1:ONE-TOUCH
2:ABBR NO.ex. 10.74.252.66
1

104
Network Scanner
Auto Dialer
QEditing/Erasing your PCs IP Address
If you have to change or erase any of the Address Book stations, follow the steps below.
For ONE-TOUCH/ABBR. NO. (When Fax Parameter No. 119 is set to 1:One-Touch, see page 86.)
For Editing
When changing a number, move 
the cursor (
]) over the number 
you wish to change, and 
overwrite it with a New number. Select a station.
Follow the same procedures as 
Steps 1 to 4b-1 on page 
102, and 
103
, Adding your PC’s IP 
Address.
IP ADDRESS...

105
Network Scanner
FTP: Consult with your network 
administrator.
453
DESTINATION : PC
1:PC 2:FTPPORT NUMBER
]509
SET
Enter a new Station.
(Max. 40 characters)
STATION NAME   
SALES 01
]
UF-7950
3
IP ADDRESS     
]
SET
4
Same steps as (For Editing) above.
5
SET
SET
4
SALES 01
10.74.252.xxx
5
SALES 01
DELETE 1:YES 2:NO 

106
QSetting the Scan Parameters
QScanner Settings (Scan Parameters) 
No.ModesFunctionInitial Setting
00SCANNER SETTINGSPrints the scanner settings.
PRESS SET TO PRINT
02COMPRESSION MODESets the default compression mode setting.
1:MH / 2:MR / 3:MMR / 4:JBIG
4:JBIG
03RESOLUTIONSets the default resolution setting.
1:150dpi 2:300dpi 3:600dpi 
4:Halftone (300dpi) 5:Halftone (600dpi)
2:300dpi
05FILE TYPE/NAMESelects the default transmission file format.  
1:TIFF / 2:PDF
1:TIFF
07ORIGINAL SIZESelects the...

107
Network Scanner
QScanner Settings (Scan Parameters) (For key Operators)  
No.ModesFunctionInitial Setting
01ABBR GROUP IDSelects the ABBR. Group ID settings.
0-99
0
4
SCAN PARAM.   (0-9)
ENTER NO. OR ∧  ∨
or
5a
5b-1
6
STOP
(2 times)
To return to standby.
(1 digit) 

108
Network Scanner
Function
QSelect Mode
You can temporarily add the file name, or select the compression format when scanning document(s). The parameters are 
returned to the preset position when the scanning is finished. To change the default settings, set the Scan Parameter No. 
2 (Compression Mode), and No. 5 (File Type/Name). (See page 
106)
orSET
For Scan File Name
For Compression
COMPRESSION :JBIG
3:MMR 4:JBIG2:COMPRESSION ?
PRESS SET TO SELECT
1:SCAN FILE NAME ?
PRESS SET TO SELECT
SET
FILE...

109
Network Scanner
5
SCAN FILE NAME
E
NTER NAME
SELECT MODE    (1-2)
ENTER NO. OR ∨  ∧
(When Custom is Selected)
To correct a mistake, use   or   to move the cursor to the right side of 
the incorrect character, press   then reenter the new character. 
CLEAR
2:SELECT MODE ?
PRESS SET TO SELECT
SET
4
6a
or
: Scan File Name
(Up to 40 characters)
UF-7950
SET
: Compression
6b 

110
Network Scanner
Direct Connection (with Crossover Cable)
QDirect Connection (with Crossover Cable)
Turn OFF the Power Switch 
(Machine and PC).Connect a Crossover LAN Cable between your machine, and the PC.
LAN Cable (Crossover)
To  P C
(Back Side of Machine)
NOTE: Do not use Standard LAN Cable.
Turn OFF/ON the Power Switch 
(Machine and PC).Input your PC’s IP Address 
into the Address Book in the 
machine (see page 102).Scan the document(s) to 
your PC (see page 100).
LINK10/100BASE
-TXRX
LAN Cable...