Panasonic Uf 6200 Operating Instructions Manual

One-Touch/Abbreviated Dialing Numbers
31
Programming Your Machine
NOTE1. If you require a special access number to ge t an outside line, enter it first and then press 
. A hyphen - is displayed for pause.
2. If you are using Pulse dialing and you wish to c hange to Tone dialing in the middle of dialing, 
press   (Represented by a/). The dialing met hod will be changed from Pulse to Tone after 
dialing the digit /. 
Ex: 9 PAUSE * 5551234
3. You can search for an unused One-Touch key or  ABBR. number by...

One-Touch/Abbreviated Dialing Numbers
32
If you have to change or delete any of the One-Touch/Abbreviated dialing numbers, follow the steps below.
NOTE1. If you made a mistake, use  or   to move the cursor beyond the incorrect number, press 
 and then re-enter the new number.
Editing One-Touch/Abbreviated Dialing Numbers
To change the settings of a One-Touch/ABBR dialing number
1
    
1:ONE-TOUCH
2:ABBR NO.
2Select   for One-Touch Dialing number
Select   for ABBR. Dialing Number
Ex:ONE-TOUCH<  >
PRESS...

One-Touch/Abbreviated Dialing Numbers
33
Programming Your Machine
To delete the settings of One-Touch/ABBR Dialing number
1
    
1:ONE-TOUCH
2:ABBR NO.
2Select   for One-Touch Dialing number
Select   for ABBR. Dialing Number
Ex:
ONE-TOUCH<  >
PRESS ONE-TOUCH
3
Enter the station you wish to delete.
Ex:
 SALES DEPT
9
-555 1234
4
 SALES DEPT
E
NTER TEL. NO.
5
To return to standby, press  .
ONE-TOUCH<  >
PRESS ONE-TOUCH
72
1
2
1
Sto p
UF6200_FAX_USA_PJQMC1259ZA.book  33 ページ  ２００８年８月１９日　火曜日　午後３時１２分 

One-Touch/Abbreviated Dialing Numbers
34
After programming a one-touch dialing number, you can print out the directory sheet which includes the first 
12 characters of each station name.  Cut along the dotted line and place it over the One-Touch key under 
the Directory Sheet Cover.  To print out a directory sheet, follow the steps below.
Printing Out a Directory Sheet
1
 
PRINT OUT      (1-7)
ENTER NO. OR 
∨ ∧
2
 
Your machine prints out the directory sheet.
* PRINTING *
DIRECTORY SHEET...

35
Programming Your Machine
Customizing Your Machine
Your facsimile machine has a variety of adjustable Fax Parameters. These parameters, listed in the 
Parameter Table, are preset for you and do not need  to be changed. If you do want to make a change, read 
the table carefully. Some parameters, such as the Resolution and Contrast parameters, can be temporarily 
changed by simple key operations just before a  transmission is made. When the transmission ends, 
however, these parameters  return to their...

Customizing Your Machine
36
Fax Parameter Table
No. ParameterSetting 
Number Setting
Comments
01 CONTRAST 1 NORMAL Setting the home  position of the CONTRAST key.
2LIGHTER
3 DARKER
02 RESOLUTION 1 STANDARD Setting the home position for the RESOLUTION.
2FINE
3S-FINE
4 HALFTONE  (FINE)
5HALFTONE (S-FINE)
04 STAMP (HOME) 1 OFF Setting the ho me position of the STAMP key.
To select the stamp function when document is stored in 
memory, see Fax  Parameter No. 28.
2O
N
05 MEMORY (HOME) 1 OFF Setting the home...

Customizing Your Machine
37
Programming Your Machine
18 OP CALL TIMER 1 20 SEC Selecting the length  of time that your machine signals 
(rings) for an incoming voice ca ll in Fax/Tel Auto Switching 
mode.  (See page 68)
2 30 SEC
3 40 SEC
4 50 SEC
19 OGM LENGTH (TAM I/F) 1 1 SEC Setting the OGM length of your TAM from 1 to 60 seconds. 
The machine will not start to detect SILENCE until the time 
setting has lapsed.
(Default = 20 sec.)
--- ---
60 60 SEC
20 SILENT DETECTION  (TAM I/F) 1 INVALID Selecting...

Customizing Your Machine
38
Fax Parameter Table
34 ENERGY SAVER MODE 1 OFF To reduce the power consumption in standby, select either 
Energy-Saver or Sleep mode  and specify the Delay Time 
(1 to 120 minutes) for the machine to enter into the 
selected mode. 
The Delay Timer setting is only available in the Energy-
Saver or Sleep Modes.
OFF : The unit will remain in standby mode 
and consume more energy than when 
in Energy-Saver or Sleep modes.
ENERGY-SAVER:  Saves energy by consuming less 
power than...

Customizing Your Machine
39
Programming Your Machine
51 REMOTE 
DIAGNOSTIC 1 INVALID Selecting whether or not the machine accepts to update 
the firmware or Remote Dia gnostics from the remote 
station. Please ask your Pa nasonic Authorized Dealer for 
details.
2VALID
52 DIAG. PASSWORD (----) Setting the password for Remote Diagnostic Mode.  
Please ask your Panasonic Authorized Dealer for details.
53 SUB-ADDRESS  PSWD (----) Setting a 20-digit password for secured sub-address 
communication.
54 FAX...

Customizing Your Machine
40
Fax Parameter Table
125 CONFIRM STATIONS 1 INVALID Set whether to confirm the destinations.When set to Valid the document cannot be sent unless the
destination is confirmed.
This function also operates when the addresses are
specified with Group Dialing or Program Dialing function.
If an address has been altered (added or removed) when
confirming addresses, the address confirmation message
will appears again when transmitting the documents
(pressing the start key).  
2VALID...