Panasonic UF 6100 YR User Manual

One-Touch/Abbreviated Dialling Numbers
31
Entering One-Touch/Abbreviated Dialling Numbers
Programming 
Your Mac hine
NOTE1. If you require a special access number to get an outside line, enter it first and then press 
. A hyphen - is displayed for pause.
2. If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling, 
press   (represented by a/). The dialling method will be changed from Pulse to Tone after 
dialling the digit /. 
Ex : 9 PAUSE * 5551234
3. You can...

One-Touch/Abbreviated Dialling Numbers
32
If you have to change or erase any of the One-Touch/Abbreviated dialling numbers, follow the steps below.
NOTE1. If you make a mistake, use  or   to move the cursor beyond the incorrect number, press 
 then re-enter the new number.
Editing One-Touch/Abbreviated Dialling Numbers
To change the settings of a  One-Touch/ABBR dialling number
1
    
1:ONE-TOUCH
2:ABBR NO.
2Select   for One-Touch Dialling number
Sele ct   for AB BR. Dialling Number
Ex:O NE -T OUC H<...

One-Touch/Abbreviated Dialling Numbers
33
Editing One-Touch/Abbreviated Dialling Numbers
Programming 
Your Mac hine
To erase the se ttings of One-Touch/ABBR Dialling number
1
    
1: ONE -T OU CH
2: ABB R NO .
2Select   for One-Touch Dialling number
Select   for ABBR. Dialling Number
Ex:ON E-T OU CH <   >
PR ESS  O NE -TC H  OR  
∨ ∧
3
Enter the station you wish to erase.
Ex: SA LE S D EP T
9
-555 1234
4
 SA LE S D EP T
E
NTER TEL. NO.
5
To return to standby, press  .
ON E-T OU CH <   >
PR ESS  O NE -TC...

One-Touch/Abbreviated Dialling Numbers
34
After programming a one-touch dialling number, you can print out the directory sheet which includes the first 
12 characters of each station name.  Cut along the dotted line and place it over the One-Touch key under 
the Directory Sheet Cover.  To print out a directory sheet, follow the steps below.
Printing Out a Directory Sheet
1
 
P RI NT  OU T         (1 -7 )
ENTER NO.  OR 
∨ ∧
2
 
Your machine prints out the directory sheet.
*  P RI NTI NG  *
D IR EC TOR Y...

35
Programming 
Your Mac hine
Customizing Your Machine
Your facsimile machine h as a variety of adjustable Fax Parameters. Th ese parameters, listed in the 
Parameter Table, are preset for you and do not need to be changed. If you do want to make a change, read 
the table carefully. Some parameters, such as the Resolution and Contrast parameters, can be temporarily 
changed by simple key operation just before a transmission is made. When the transmission ends, 
however, these parameters return to their...

Customizing Your Machine
36
Fax Parameter Table
No. ParameterSetting 
Nu mb erSetting Comments
01 CONTRAST 1 Normal Setting the home position of the CONTRAST key.
2 Lighter
3 Darker
02 RESOLUTION 1 Standard Setting the home position for the RESOLUTION.
2Fine
3 S-Fine
4 Halftone
(Fine)
5 Halftone
(S-Fine)
04 STAMP 1 Off Setting the home position of the STAMP key.
To select the stamp function when document is stored in 
memory, see Fax Parameter No. 28. 2On
05 MEMORY 1 Off Setting the home position for...

Customizing Your Machine
37
Fax Parameter Table
Programming 
Your Mac hine
18 OP CALL TIMER 1 20 sec. Selecting the length of time that your machine signals 
(rings) for an incoming voice call in Fax/Tel Auto Switching 
mode.  (See page 64) 2 30 sec.
3 40 sec.
4 50 sec.
19 OGM LENGTH 
(TAM I/F)1 1 sec. Setting for the OGM length of your TAM from 1 to 60 
seconds. The machine will not start to detect SILENCE 
until the time setting has lapsed.
(Default = 20 sec.) --- ---
60 60 sec.
20 SILENT DETECTION...

Customizing Your Machine
38
Fax Parameter Table
34 ENERGY SAVER 
MODE1 Off To reduce the power consumption in standby, select either 
Energy-Saver or Sleep mode and specify the Delay Time 
(1 to 120 minutes) for the machine to enter into the 
selected mode. 
The Delay Timer setting is only available in the Energy-
Saver or Sleep Modes.
Off: The unit will remain in standby 
mode and consume more energy 
than when in Energy-Saver or 
Sleep modes.
Energy-Saver Mode: Saves energy by consuming less 
power...

Customizing Your Machine
39
Fax Parameter Table
Programming 
Your Mac hine
NOTE1. The standard settings are printed on the Fax Parameter List. To print out Fax Parameter List, 
see page 127.
2. The contents of Fax Parameter may differ depending on the each country’s regulation or 
specification. 51 REMOTE 
DIAGNOSTIC1 Invalid Selecting whether or not the machine accepts to update 
the firmware or Remote Diagnostics from the remote 
station. Please ask your Panasonic Authorized Dealer for 
details. 2...

40
Basic Operations
Loading Documents
In general, your machine will send any document printed on A4 size paper.
Note:The maximum document width that can be sent thro ugh the ma chine is 257mm. 
However, the effective scanning width is 208mm.
You must never try to send documents that are:
To transmit these kinds of documents, make a photocopy first and then transmit the copy instead.
Documents You Can Send
Documents You Cannot Send
Wet Covered with wet ink or paste
Too thin (e.g., onionskin, airmail...