Panasonic System Controller Wv Cu950 Addendum Information Manual
Have a look at the manual Panasonic System Controller Wv Cu950 Addendum Information Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 38
38
●To Control a Recorder and Cameras via the Network
The following is the description of the connection between a recorder and this unit to control the recorder and cameras via the
network.
1. Set the unit address of the recorder to 5 or larger.
(Refer to the recorder’s operating instructions.)
2. Set the [Camera control] setting to “PSD” for all cameras in SETUP MENU of the recorder.
3. Connect the unit’s CAM OUT 1 to 16 connectors to the recorder’s VIDEO IN 1 to 16 connectors with a coaxial cable.
4....](http://img.usermanuals.tech/thumb/58/69766/w64_wv-cu950-addendum_en_om_d-37.png "Page 38
38
●To Control a Recorder and Cameras via the Network
The following is the description of the connection between a recorder and this unit to control the recorder and cameras via the
network.
1. Set the unit address of the recorder to 5 or larger.
(Refer to the recorder’s operating instructions.)
2. Set the [Camera control] setting to “PSD” for all cameras in SETUP MENU of the recorder.
3. Connect the unit’s CAM OUT 1 to 16 connectors to the recorder’s VIDEO IN 1 to 16 connectors with a coaxial cable.
4....")
![Page 39
39
●PS·Data Connection
1. Set the unit address of the recorder to 5 or larger.
2. Set the [Camera control] setting to “PSD” for all cameras in SETUP MENU of the recorder.
3. Connect the unit’s CAM OUT 1 to 16 connectors to the recorder’s VIDEO IN 1 to 16 connectors with a coaxial cable.
4. Connect the unit’s DATA4 Port connector to the recorder’s DATA port with a modular cable.
Select the recorder’s new unit address, which is set in Step 1, in 600 RECORDER of SETUP MENU or the Recorder window
of...](http://img.usermanuals.tech/thumb/58/69766/w64_wv-cu950-addendum_en_om_d-38.png "Page 39
39
●PS·Data Connection
1. Set the unit address of the recorder to 5 or larger.
2. Set the [Camera control] setting to “PSD” for all cameras in SETUP MENU of the recorder.
3. Connect the unit’s CAM OUT 1 to 16 connectors to the recorder’s VIDEO IN 1 to 16 connectors with a coaxial cable.
4. Connect the unit’s DATA4 Port connector to the recorder’s DATA port with a modular cable.
Select the recorder’s new unit address, which is set in Step 1, in 600 RECORDER of SETUP MENU or the Recorder window
of...")
41 WJ-HD300 SERIES CONTROL (WV-CU950/650 TERMINAL MODE) WJ-HD300 SERIES CONTROL (WV-CU950/650 PS·DATA) Refer to p. 22 WJ-HD300 SERIES CONTROL (TERMINAL MODE). Refer to p. 36 and the operating instructions of system controller.
42 WJ-HD300 SERIES CONTROL (WV-CU360C/CJ TERMINAL MODE) •Available operations are in common with WJ-HD500 Series. (Refer to this unit’s operating instructions.) This document describes operations applicable to WJ- HD300 Series only. •You cannot control the following functions from System Controller WV-CU360C and WV-CU360CJ. (It is recom- mended to use System Controller WV-CU950 or WV- CU650.) •A – B repeat playback •GO TO LAST •Filtering ON/OFF •MARK •Text display ON/OFF •Disk selection •System functions ■ Controlling Digital Disk Recorder WJ-HD300 Series ●Search Playback You can search playback images using the ALARM RECALL table or the SEARCH table. Every time you press the INDEX button, the display will change as follows. Live image →Date-and-time entry form→Recording event list →VMD search list →Marking list →Date-and-time entry form... • Date-and-time Search Playback The recorded images can be searched for through the date and time. 1. Enter the recorder mode. (Refer to the units operating instructions.) 2. Press the INDEX button. The date-and-time entry form will appear on the monitor. Note:The factory default setting is the current date and time. 3. Press the NEXT or PREV button to enter the desired date and time. The cursor can be adjusted by moving the joystick rightward or leftward. Note: To exit the entry form, press the MON (ESC) but- ton. 4. Press the PLAY or CAM (SET) button. After the search through the date and time, the recorded image will be played. • Recording event search You will select a searching filter from TIME&DATE, CAM- ERA, REC EVENT, and TEXT. Playback pictures will be searched by the selected searching filter. 1. Enter the recorder mode. (Refer to the units operating instructions.) 2. Repeat pressing the INDEX button until the recording event list window is displayed on the monitor. The recorder will enter the searching mode. Notes: •To change the monitor display to the thumbnail, press the F1 button. (Refer to the operating instruc- tions of recorder for details on monitor display.) •You can display neither the text information nor DATA COPY window. 3. Select a desired searching filter by moving the joystick rightward or leftward. Note: The illustration is an example in which CAMERA has been selected for the searching filter. TIME&DATE SEARCH REC EVENT SEARCH VMD SEARCH MARK START ..::FEB 2 0412 00 00 AM UP LR DOWN TIME&DATE 01ch 01ch 01ch 01ch 01ch 01ch 01ch 01chMANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL CAM REC EVTABCDEFGHIJKLMNOP ABCDEFGHIJKLMNOP ABCDEFGHIJKLMNOP ABCDEFGHIJKLMNOP ABCDEFGHIJKLMNOP ABCDEFGHIJKLMNOP ABCDEFGHIJKLMNOP ABCDEFGHIJKLMNOPTEXT APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM TIME&DATE SEARCH REC EVENT SEARCH VMD SEARCH MARK TIME&DATECAMERAREC EVENTTEXTUNLOCK FILTER TOTAL APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM100 TIME&DATE 01ch 01ch 01ch 01ch 01ch 01ch 01ch 01chMANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL CAM REC EVTABCDEFGHIJKLMNOP ABCDEFGHIJKLMNOP ABCDEFGHIJKLMNOP ABCDEFGHIJKLMNOP ABCDEFGHIJKLMNOP ABCDEFGHIJKLMNOP ABCDEFGHIJKLMNOP ABCDEFGHIJKLMNOPTEXT APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM TIME&DATE SEARCH REC EVENT SEARCH VMD SEARCH MARK TIME&DATECAMERAREC EVENTTEXTUNLOCK FILTER TOTAL APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM100
43 4. To determine the filter setting, press the CAM (SET) but- ton. The searching filter window will be displayed on the monitor. Note:The searching filter window differs depending on the searching filter selected in Step 3. Refer to Searching filter windows for details on each win- dow. 5. Filter recording events. (Refer to Searching filter win- dows.) 6. To select a desired recording event, perform the follow- ing. •Move the joystick upward or downward. •Press the NEXT or PREV button. Note:To exit the search mode, press the MON (ESC) button. 7. Press the PLAY button. The playback of selected recording event will start. Searching filter windows Available controls and functions (TIME&DATE FILTER- ING window) Joystick: Moves the cursor. NEXT or PREV button:Changes a parameter. CAM (SET) button:Executes the filtering. MON (ESC) button:Cancels the filtering and returns to the upper menu. Available controls and functions (CAMERA FILTERING window)Joystick: Moves the cursor. NEXT or PREV button:Changes a parameter. CAM (SET) button:Executes the filtering. MON (ESC) button:Cancels the filtering and returns to the upper menu. Available controls and functions (REC EVENT FILTER- ING window) Joystick: Moves the cursor. NEXT or PREV button:Changes a parameter. CAM (SET) button:Executes the filtering. MON (ESC) button:Cancels the filtering and returns to the upper menu. Available controls and functions (TEXT FILTERING win- dow) NEXT or PREV button: Changes a parameter. CAM (SET) button:Executes the filtering. MON (ESC) button:Cancels the filtering and returns to the upper menu. • VMD search Recording events will be searched by the date and time when a camera detects a motion. Then, a result list or a thumbnail will be displayed. For playback, you will select a time and date displayed on the result list or thumbnail. Filtering is available by camera channel, date-and-time, detection area or search mode. 1. Enter the recorder mode. (Refer to the units operating instructions.) 2. Repeat pressing the INDEX button until the VMD search list window is displayed on the monitor. The recorder will enter the searching mode. 1 2345678 91011 12 13 14 15 16 CAMERA FILTERINGCAMERA SET : [ SET ] CANCEL : [ ESC ] START JAN103 SET : [SET] CANCEL : [ESC] 00 00 ■ TIME&DATE FILTERING ..:AM END JAN 1 03 0 00..:AM 1 2345678 91011 12 13 14 15 16 CAMERA FILTERINGCAMERA SET : [ SET ] CANCEL : [ ESC ] SET : [ SET ] CANCEL : [ ESC ] REC EVENT FILTERING OFF ON ON ON ON ON ON EMERGENCYVMD TERMINAL COMMAND VIDEO LOSSMANUALSCHEDULE TEXT FILTERING WITHOUT TEXT SET : [ SET ] CANCEL : [ ESC ]
44 (The list displayed in the window is the results of previ- ous search.) 3. Press the CAM (SET) button. The VMD search window will be displayed on the moni- tor. 4. Enter a camera number and time range. Available controls and functions Joystick: Moves the cursor. NEXT or PREV button:Changes a parameter. PLAY button:Executes the VMD search and returns to the upper menu. MON (ESC) button:Cancels the filtering and returns to the upper menu. 5. Press the CAM (SET) button. The motion detection area setup window will be dis- played. Note:If no image was recorded in the time range set in step 4, the motion detection area setup window will not be displayed. 6. Select SETUP AREA on the status bar by pressing the NEXT or PREV button. A + mark will appear at the center of the monitor. Note:To set all displayed areas as motion detection areas, press the CAM (SET) button after selecting ALL AREAS. 7. Move the + mark to a desired area with the joystick, and then press the CAM (SET) button. The start point of motion detection area will be determined. 8. Move the + mark to another desired area with the joy- stick, and then press the CAM (SET) button again. The end point of motion detection area will be determined. 9. To configure more motion detection areas, repeat Step 7 and 8. (Up to 4 motion detection areas are available.) Note:To delete the motion detection area, select DELETE AREA on the status bar by pressing the NEXT or PREV button. Then, move the + mark to the desired area with the joystick, and press the CAM (SET) button. 10. Select SENSITIVITY on the status bar by pressing the NEXT or PREV button. Note:Depending on the position of the set detection areas, the sensitivity indications of the detection areas may be displayed overlapping each other. 11. Move the motion detection area by moving the joystick rightward or leftward. START CAMERA JAN CAM1 103 SET : [SET] SEARCH : [PLAY] CANCEL : [ESC] 12 00 ■ SELECT CAMERA & DATE ..:AM END JAN 1 0312 00 ..:AM TIME&DATE 01ch 01ch 01ch 01ch 01ch 01ch 01ch 01chCAM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM TIME&DATE SEARCH REC EVENT SEARCH VMD SEARCH MARK VMD SEARCH TOTAL APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM12345
45 12. Select the sensitivity by moving the joystick upward or downward. The sensitivity will be applied. OFF:The motion detector is not activated on the camera channel. LOW:The sensitivity level is low. MID:The sensitivity is level is medium. HIGH:The sensitivity level is high. 13. To exit the motion detection area setup window, select EXIT on the status bar by pressing the NEXT or PREV button. Then, press the CAM (SET) button. The motion detection mode setup window will be dis- played on the monitor. Notes: •To cancel the motion detection area setup, press the MON (ESC) button. The VMD search list window will be displayed again on the monitor. •Refer to the units operating instructions for details on each detection mode. 14. Select a desired detection mode with the joystick, and select a desired parameter by pressing the NEXT or PREV button. Note:To cancel the setting and return to the motion detection area setup window, press the MON (ESC) button. 15. Press the CAM (SET) button. The motion detection mode will be determined, the VMD search will be started, and the VMD search list window will be displayed again on the monitor. Note:To cancel the VMD seach, press the STOP but- ton. 16. To select a desired recording event, perform the follow- ing. •Move the joystick upward or downward. •Press the NEXT or PREV button. Notes: •To exit the search mode, press the MON (ESC) but- ton. •To change the monitor display to the thumbnail, press the F1 button. (Refer to the operating instruc- tions of recorder for details on monitor display.) •You cannot display the DATA COPY window.17 Press the PLAY button. The playback of selected recording event will start. • Marking search The recording time of the recorded images with a marked point will be displayed in a list or a thumbnail. For playback, you will select the desired recording time to play. (Refer to the recorders operating instructions for details on marking.) 1. Enter the recorder mode. (Refer to the units operating instructions.) 2. Repeat pressing the INDEX button until the marking list window is displayed on the monitor. The recorder will enter the searching mode. Notes: •To change the monitor display to the thumbnail, press the F1 button. (Refer to the operating instruc- tions of recorder for details on monitor display.) •You cannot display the DATA COPY window. 3. Select the desired marked time by performing either of the following. •Move the joystick upward or downward. •Press the NEXT or PREV button. 4. Press the PLAY button. The playback of recorded image will start from the selected time. 5. To exit the search mode, press the MON (ESC) button. The live image will be displayed again on the monitor. • Thumbnail window The thumbnail window is displayed when you press the F1 button while the recording event list window, VMD search list window, or marking list window is displayed. VECTOR ANY AREA MASKING DURATION SET : [SET] SEARCH : [PLAY] CANCEL : [ESC] 20s 20s 20s 20s 20s20s 20s ■ VMD SEARCH DURATION 24h ABCD ABCD TIME&DATE 01ch 01ch 01ch 01ch 01ch 01ch 01ch 01chCAM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM TIME&DATE SEARCH REC EVENT SEARCH VMD SEARCH MARKTOTAL APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM12345
46 mm=Monitor No. n=0: Search playback* n=1: Time & date search playback** * Transmission command changes the moni- tor display as follows. Date-and-time entry form →Recording event list →VMD search list →Marking list →Date-and-time entry form...) ** Date-and-time entry form of matrix switcher appears. COMMUNICATION PROTOCOL (FOR USERS OF WJ-HD300 SERIES) WJ-HD300 SERIES CONTROL (WV-CU360C/CJ PS·DATA) Parameter (ASCII) Stop Index Multiscreen segment switch- ing Item CMD:RmmMLn (Described as CMD:RmmML in the operating instructions)ANS:RmmML mm=Monitor No. n=0: 4 segments n=1: 7 segments n=2: 9 segments n=3: 10 segments n=4: 13 segments n=5: 16 segments n=skipped: Segment pattern change* * Transmission command changes the multi- screen segment pattern as follows. 4 (segments) →7 →9 →10 →13 →16 → 4.... ANS:RmmSPn mm=Monitor No. n=0 Stop playback n=1 Stop recording n=V Stop VMD search The following commands have been described in the operating instructions of this unit (matrix switcher). However, while Digital Disk Recorder WJ-HD300 Series are being connected to the unit, these commands will be changed as follows. Available operations are in common with WJ-HD500 Series. (Refer to the units operating instructions.) CMD:RmmSCn (Described as CMD:RmmSC in the operating instructions)ANS: RmmSCn Transmission Command (ASCII)Response (ASCII) CMD:RmmSPn Recorder Control Available controls and functions Joystick: Moves the cursor. NEXT or PREV button:Moves the cursor. PLAY button:Plays back the selected recording event. F1 button:Changes the monitor display to the list. MON (ESC) button:Exits the search mode.
47 mm=Monitor No. n=0 HDD normal/event recording sector n=1 HDD copy sector n=2 Disk connected to COPY 1 n=3 Disk connected to COPY 2 mm=Monitor No. Setup control commands are available. ( Refer to WJ-SX150A Operating Instructions. ) WJ-HD300 Series OSD dis- play ON (Refer to WJ-SX150A Operating Instructions for WJ- SX150A OSD ON/OFF.) ItemTransmission Command (ASCII)Response (ASCII) Parameter (ASCII) CMD:RmmDI ANS:RmmDI DATA COPY window ON CMD:RmmPD ANS:RmmPD mm=Monitor No. Setup control commands are available. (Refer to WJ-SX150A Operating Instructions.) List/Thumbnail CMD:RmmTN ANS:RmmTN mm=Monitor No. Transmission command displays list or thumbnail alternately. Text display ON CMD:RmmDT ANS:RmmDT mm=Monitor No. Setup control commands are available. (Refer to WJ-SX150A Operating Instructions.) Disk selection CMD:RmmDSn ANS:RmmDS CMD:RmmRPn A - B repeat playback ANS:RmmRP MARK CMD:RmmMP ANS:RmmMP mm=Monitor No. Filtering ON/OFF CMD:RmmLTn ANS:RmmLTmm=Monitor No. n=0 OFF n=1 ON GO TO LAST CMD:RmmPM ANS:RmmPM mm=Monitor No.n=0 A - B repeat playback OFF n=1 Set repeat start point (A point) n=2 Set repeat end point (B point) The following commands have been newly added. These commands are available only while Digital Disk Recorder WJ-HD300 Series are being connected to the unit. Recorder Control
Panasonic Canada Inc.5770 Ambler Drive,Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 http://www.panasonic.ca Panasonic Sales CompanyDivision of Panasonic Puerto Rico Inc.San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina P.R. 00985(809)750-4300 Panasonic System Solutions Company, Unit Company of Panasonic Corporation of North AmericaSecurity Systems www.panasonic.com/security For customer support, call 1.877.733.3689 Executive Office: Three Panasonic Way 2H-2, Secaucus, New Jersey 07094Zone Office Eastern: Three Panasonic Way, Secaucus, New Jersey 07094 Central: 1707 N. Randal Road, Elgin, IL 60123 Southern: 1225 Northbrook Parkway, Suwanee, GA 30024 Western: 6550 Katella Ave., Cypress, CA 90630 © 2005 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. N0504-2015 3TR002744CAA Printed in Japan