Home > Panasonic > Controller > Panasonic System Controller Wv Cu950 Addendum Information Manual

Panasonic System Controller Wv Cu950 Addendum Information Manual

Add to Favourites
    Download as PDF

    View the Panasonic System Controller Wv Cu950 Addendum Information Manual for free. All the Panasonic manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 This operation is skipped when the auto login is set to ON. (Refer to the operating instructions of matrix switcher.) 1. Turn on the power switches of all system components. The OPERATE indicator will light up. 2. To turn on the power of the system controller, connect the AC adapter to the AC outlet. The OPERATE indicator lights up and Terminal Mode No User appears on the LCD. BEFORE OPERATION INSTALLATIONS AND CONNECTIONS SETUP PROCEDURES (HARDWARE) Note: This section describes the terminal mode. To...
    Page 2 2 ■ Operation End (Logout) This operation is skipped when the auto logout is set to ON. This function is used when an operator leaves the controller or no longer requires access to the system. To log out of the system, press the MON LOCK/LOGOUT button while holding down the SHIFT button. Logout will blink on the LCD for about 3 seconds. Then, Terminal Mode No User appears on the LCD. Note:If you want to save the power consumption, discon- nect the DC 9 V plug from the controller, and remove the AC...
    Page 3 3 ● Releasing Priority Lock 1. Select the desired monitor. (Refer to Monitor Selection.) 2. Press the MON LOCK/LOGOUT button to release the priority lock mode. The monitor number returns to the normal display on the active monitor. ■ Camera Selection 1. Select the desired monitor. (Refer to Monitor Selection.) 2. Press the numeric buttons to select the desired camera number (1 to 99). 3. Press the CAM (SET) button. The selected cameras image will appear on the active monitor, and the selected camera...
    Page 4 4 Note: This section describes the terminal mode. To operate in the PS·Data mode, refer to the operating instructions. Buttons and control for cameras or camera site accessories are located on the 3D joystick unit and the right side of main unit. Included are zoom control, focus control, iris control, preset and pan/tilt controls. Normally, combination cameras equipped with the specific feature or a WV-RC100 or WV-RC150 Receiver are required to utilize these functions. Note:Refer to the cameras...
    Start reading Panasonic System Controller Wv Cu950 Addendum Information Manual

    Related Manuals for Panasonic System Controller Wv Cu950 Addendum Information Manual

    All Panasonic manuals