Panasonic System Controller Wv Cu950 Addendum Information Manual
Have a look at the manual Panasonic System Controller Wv Cu950 Addendum Information Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
21 • Record List/Thumbnail Display You can operate the Record List or Thumbnail Display by referring to the recorder’s operating instructions. In addi- tion, the following operations from the system controllers are also available. Shuttle ring clockwise: Moves to the next page. Shuttle ring counterclockwise:Moves to the previous page. JogDial clockwise or counterclockwise:Moves the cursor. + or – button:Moves the cursor. CAM (SET) button:Displays the search editing area. / Starts the search after you enter the search condi- tion. + button:Increments a parameter. – button:Decrements a parameter. PLAY/PAUSE button:Starts the playback of a record pointed by the cursor. MON (ESC) button:Exits the search mode and returns to the upper menu. F1 button:Displays/hides the search editing area.. F2 button:Selects a group to be played back. F3 button: Changes the display mode of the Record List between the alarm search ON and OFF. ON:Displays only the Alarm and Emergency Record List of the selected group. OFF:Displays all the record lists for the selected group. 3D joystick upward ( D):Moves the cursor up. 3D joystick downward (C):Moves the cursor down. 3D joystick to leftward (A):Moves the cursor to the left. 3D joystick to rightward (B):Moves the cursor to the right. Note:The PLAY/PAUSE button is deactivated in the search editing area. ●Electronic Zooming (EL-ZOOM) Playback images can be electrically zoomed besides a cameras optical zooming. 1. Enter the recorder mode. (Refer to p. 19 Recorder Mode.) 2. Press the PLAY/PAUSE button. 3. Select the desired camera number by pressing the numeric buttons. 4. Press the CAM (SET) button. The selected camera’s picture is displayed in the spot mode. 5. Each time the EL-ZOOM button are pressed, the zoom- ing range are changeable as follows: 2x → 4x → 8x → 1x →2x Note:You can move the zoomed area on the monitor by moving the 3D joystick. 6. To return the zooming range to x 1, press the EL-ZOOM button again. 7. To return to the multiscreen display, press the MULTI SCREEN button. ●Multiscreen Sequence Digital disk recorder starts a sequence according to the setting of WJ-HD500 Series. 1. Enter the recorder mode. (Refer to p. 19 Recorder Mode.) 2. Press the TOUR SEQ/GROUP SEQ button. The sequence will be activated. 3. To deactivate the sequence, press the MULTI SCREEN button. The monitor will change into the multiscreen display. Search Editing Area • Thumbnail Display MAY29.00 0:01 G1 SEARCH 000010009 000000013 000000009 000000005000010008 000000012 000000008 000000004000010007 000000011 000000007 000000003000010006 000000010 000000006 000000002 Search Editing Area • Record List 000010009DATE MAY29.00 NO G2 G123:59:59 T/L 22:15:40 M/S ALM-TRM12 O/S ALM-VMD3 T/L T/L ALM-TRM1 M/S ALM-PC4 T/L EMR T/L MAN (TOTAL 2343RECORD) 21:00:07 17:33:05 7:23:11 6:59:44 8:55:28 0:01:28 G3 G4 G3 000010008 000010007 000010006 000010005 000010004 000010003 000010002GROUP TIME REC-MODEALL GROUP MAY29.00 SEARCH: 0:01 G1 SEL:←→ CHG:+– EXE:SET ESC:FSTOP ALARM # SEARCH:[DISPLAY]ALL ALL ALL
22
Matrix switcher can control the following functions of Digital
Disk Recorder WJ-HD300 Series. The following is the pro-
cedure of WJ-HD300 Series SETUP MENU.
Notes:
•The following operating procedures are for the terminal
mode. If you are using a PS·Data system controller,
refer to p. 36.
•
When a Multiplexer board is installed in the matrix switch-
er, you can neither connect nor control a WJ-HD300 Series
recorder. You need to remove the board from the matrix
switcher.
•Some parts of monitor displays, described on this docu-
ment, may differ from the actual status.
■Displaying WJ-HD300 Series
SETUP MENU
To display WJ-HD300 Series SETUP MENU, follow the pro-
cedure below.
1. Confirm that WJ-HD300 Series is correctly and securely
connected.
2. Select the desired monitor. (Refer to p. 3 Monitor
Selection.)
3. Enter the recorder mode. (Refer to p. 19 Recorder
Mode.) Then, the selected monitor number, recorder
number, and /HD300 will appear on the LCD.
4. Press the MENU button repeatedly until System Setup
appears on the LCD.
5. Press the F1 button.
WJ-HD300 Series SETUP MENU will appear on the
active monitor, and “
B” mark will light up beside “On”.
The following functions and buttons are valid in SETUP
MENU.
WJ-HD300 SERIES CONTROL (TERMINAL MODE)
JogDial clockwise:
Increments a parameter.
JogDial counterclockwise:Decrements a parameter.
CAM (SET) button:Executes the selections and dis-
plays a submenu.
+ button:Increments a parameter.
– button:Decrements a parameter.
MON (ESC) button:Returns to SETUP MENU or the
previous menu.
3D joystick upward (
D):Moves the cursor up.
3D joystick downward (C):Moves the cursor down.
3D joystick to the left (A):Moves the cursor to the left.
3D joystick to the right (B):Moves the cursor to the
right.
CLEAR button:Deletes a character when editing a
camera title, user ID, or password, etc.
6. To end the setting and return to the normal view, press
the F2 button when SETUP MENU is displayed.
B
mark will disappear from the LCD.
■Controlling Digital Disk
Recorder WJ-HD300 Series
The following are the operating procedures of WJ-HD300
Series via the system controller.
●Recorder Mode
The operations are the same as WJ-HD500 Series. (Refer to
p. 19.)
●Multiscreen Segment Switching
The operations are the same as WJ-HD500 Series. (Refer to
p. 19.)
Note:The multiscreen segment patterns can be switched
as follows. (Applicable for WJ-HD316)
4 segments (1 - 4 CH)
→4 segments (5 - 8 CH) →4
segments (9 - 12 CH)
→4 segments (13 - 16 CH) →7
segments (1 - 7 CH)
→9 segments (1 - 9 CH) →9 seg-
ments (10 -16 CH)
→10 segments (1 - 10 CH) →13
segments (1 - 13 CH)
→16 segments (1 - 16 CH)
Mon4 Cam-- R4
/HD300
System Setup 301
5On Off
System Setup 301
On Off
23 ●Normal Playback The operations are the same as WJ-HD500 Series. (Refer to p. 19.) Note:Refer to the recorder’s operating instructions for details and other playback modes. ●Manual Recording The operations are the same as WJ-HD500 Series. (Refer to p. 20.) ●Stopping REC ONLY Alarm Recording The operations are the same as WJ-HD500 Series. (Refer to p. 20.) ■Search Playback You can search recorded images through the date and time. Every time you press the SEARCH/T&D SEARCH button in the recorder mode, the monitor display will change as fol- lows. Live image →Date-and-time entry form →Recording event list →VMD search list →Marking list →Date-and-time entry form… The following are the details on LCD display patterns and function buttons. LCD display while the event list is displayed on the monitor LCD display while the thumbnail menu is displayed on the monitorNote: While holding down the SHIFT button, the LCD dis- play will become as follows. Available buttons and functions (Common) F1 button: Thumb or List Changes the monitor display between the recording event list window and thumbnail menu. F3 button:Text Displays text information of selected event on the recording event list. F4 button:Copy Displays the DATA COPY window while the recording event, VMD search, or making list window is displayed. F1 button while holding down the SHIFT button:Nr-A Specifies the normal or event recording area for the playback media. F2 button while holding down the SHIFT button:Cp-A Specifies the copy area for the playback media. F3 button while holding down the SHIFT button:Cpy1 This button is reserved for future use. F4 button while holding down the SHIFT button:Cpy2 This button is reserved for future use. Notes: •The monitor display is not changed even if pressing the F1 button while the date-and-time entry form is dis- played. •To close the monitor display activated by the function buttons, press the MON (ESC) button. •The DATA COPY window is not displayed while a thumbnail window is displayed. •Refer to the operating instructions of recorder for details on each function. Available buttons and functions (Text information) CAM (SET), MON (ESC), or EXIT button: Returns to the upper menu. Note:Text editing is not available. Search Mode /HD300 Thumb Text Copy F1 F2 F3 F4 Search Mode /HD300 List Text Copy F1 F2 F3 F4 Search Mode /HD300 Nr-A Cp-A Cpy1 Cpy2 F1 F2 F3 F4
24 • Recording event search You will select a searching filter from TIME&DATE, CAM- ERA, REC EVENT, and TEXT. Playback pictures will be searched by the selected searching filter. 1. Enter the recorder mode. (Refer to p. 19 Recorder Mode.) 2. Repeat pressing the SEARCH/T&D SEARCH button until the recording event list window is displayed on the monitor. The recorder will enter the searching mode. 3. Select a desired searching filter by moving the joystick rightward or leftward. Note: The illustration is an example in which CAMERA has been selected for the searching filter. 4. To determine the filter setting, press the CAM (SET) but- ton. The searching filter window will be displayed on the monitor. Note:The searching filter window differs depending on the searching filter selected in Step 2. Refer to p. 25 Searching filter windows for details on each win- dow. 5. Filter recording events. (Refer to p. 25 Searching filter windows.) 6. To exit the searching filter window, press the MON (ESC) button. The searching filter window will be closed, and the recording event list window will be dis- played again on the monitor. Note:Refer to Step 3 for the screenshot. Available buttons and functions (DATA COPY window) JogDial clockwise: Increments a parameter. JogDial counterclockwise:Decrements a parameter. CAM (SET) button:Executes the selection and starts data copy. (If OK is selected) / Cancels the selec- tion and returns to the upper menu. (If CANCEL is selected) MON (ESC) or EXIT button:Cancels the selection and returns to the upper menu. 3D joystick upward ( D):Moves the cursor up. 3D joystick downward (C):Moves the cursor down. 3D joystick leftward (A):Moves the cursor to the left. 3D joystick rightward (B):Moves the cursor to the right. • Date-and-time Search Playback The recorded images can be searched for through the date and time. 1. Enter the recorder mode. (Refer to p. 19 Recorder Mode.) 2. Press the SEARCH/T&D SEARCH button repeatedly until the date-and-time entry form appears on the moni- tor. The date-and-time entry form will appear on the center of monitor. Note:The factory default setting is the current date and time. 3. Enter the desired date and time by performing either of the following. •Rotate the JogDial clockwise or counterclockwise. •Press the + or – button. The cursor can be adjusted by moving the 3D joystick to the right or left. 4. Press the PLAY/PAUSE or CAM (SET) button. After the search through the date and time, the recorded image will be played. 5. To exit the entry form, press the MON (ESC) or EXIT button. The live image will be displayed again on the monitor. TIME&DATE 01ch 01ch 01ch 01ch 01ch 01ch 01ch 01chMANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL CAM REC EVTABCDEFGHIJKLMNOP ABCDEFGHIJKLMNOP ABCDEFGHIJKLMNOP ABCDEFGHIJKLMNOP ABCDEFGHIJKLMNOP ABCDEFGHIJKLMNOP ABCDEFGHIJKLMNOP ABCDEFGHIJKLMNOPTEXT APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM TIME&DATE SEARCH REC EVENT SEARCH VMD SEARCH MARK TIME&DATECAMERAREC EVENTTEXTUNLOCK FILTER TOTAL APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM100 TIME&DATE SEARCH REC EVENT SEARCH VMD SEARCH MARK START ..::FEB 2 0412 00 00 AM TIME&DATE 01ch 01ch 01ch 01ch 01ch 01ch 01ch 01chMANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL CAM REC EVTABCDEFGHIJKLMNOP ABCDEFGHIJKLMNOP ABCDEFGHIJKLMNOP ABCDEFGHIJKLMNOP ABCDEFGHIJKLMNOP ABCDEFGHIJKLMNOP ABCDEFGHIJKLMNOP ABCDEFGHIJKLMNOPTEXT APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM TIME&DATE SEARCH REC EVENT SEARCH VMD SEARCH MARK TIME&DATECAMERAREC EVENTTEXTUNLOCK FILTER TOTAL APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM100 1 2345678 91011 12 13 14 15 16 CAMERA FILTERINGCAMERA SET : [ SET ] CANCEL : [ ESC ]
25 7. Select a desired recording event by performing one of the following. •Move the 3D joystick controller to up or down. •Rotate the JogDial clockwise or counterclockwise. •Press the + or – button. Note:To move to the next or previous page, perform either of the following. •Move the zoom wheel controller to the right or left. •Rotate the shuttle ring clockwise or counterclock- wise. 8. Press the PLAY button. The playback of selected recording event will start. 9. To exit the search mode, press the MON (ESC) or EXIT button. The live image will be displayed again on the monitor. Searching filter windows Available controls and functions (TIME&DATE FILTER- ING window) JogDial clockwise: Increments a parameter. JogDial counterclockwise:Decrements a parameter. + button: Increments a parameter. – button: Decrements a parameter. CAM (SET) button:Executes the filtering. MON (ESC) or EXIT button:Cancels the filtering and returns to the upper menu. 3D joystick upward ( D):Moves the cursor up. 3D joystick downward (C):Moves the cursor down. 3D joystick leftward (A):Moves the cursor to the left. 3D joystick rightward (B):Moves the cursor to the right. Available controls and functions (CAMERA FILTERING window) JogDial clockwise or counterclockwise: Changes the camera number, pointed by the cursor, between On and OFF. + button:Selects the next camera number. – button: Selects the previous camera number. CAM (SET) button:Executes the filtering. MON (ESC) or EXIT button:Cancels the filtering and returns to the upper menu. 3D joystick upward ( D):Moves the cursor up. 3D joystick downward (C):Moves the cursor down. 3D joystick leftward (A):Moves the cursor to the left. 3D joystick rightward (B):Moves the cursor to the right. Available controls and functions (REC EVENT FILTER- ING window) JogDial clockwise: Increments a parameter. JogDial counterclockwise:Decrements a parameter. + button: Increments a parameter. – button: Decrements a parameter. CAM (SET) button:Executes the filtering. MON (ESC) or EXIT button:Cancels the filtering and returns to the upper menu. 3D joystick upward ( D):Moves the cursor up. 3D joystick downward (C):Moves the cursor down. 3D joystick leftward (A):Moves the cursor to the left. 3D joystick rightward (B):Moves the cursor to the right. Available controls and functions (TEXT FILTERING win- dow) JogDial clockwise: Increments a parameter. JogDial counterclockwise:Decrements a parameter. + button: Increments a parameter. – button: Decrements a parameter. CAM (SET) button:Executes the filtering. MON (ESC) or EXIT button:Cancels the filtering and returns to the upper menu. START JAN103 SET : [SET] CANCEL : [ESC] 00 00 ■ TIME&DATE FILTERING ..:AM END JAN 1 03 0 00..:AM SET : [ SET ] CANCEL : [ ESC ] REC EVENT FILTERING OFF ON ON ON ON ON ON EMERGENCYVMD TERMINAL COMMAND VIDEO LOSSMANUALSCHEDULE 1 2345678 91011 12 13 14 15 16 CAMERA FILTERINGCAMERA SET : [ SET ] CANCEL : [ ESC ] TEXT FILTERING WITHOUT TEXT SET : [ SET ] CANCEL : [ ESC ]
26 • VMD search Recording events will be searched by the date and time when a camera detected the brightness-level change. Then, a result list or a thumbnail will be displayed. For playback, you will select a time and date displayed on the result list or thumbnail. Filtering is available by camera channel, date-and-time, detection area or search mode. 1. Enter the recorder mode. (Refer to p. 19 Recorder Mode.) 2. Repeat pressing the SEARCH/T&D SEARCH button until the VMD search list window is displayed on the monitor. The recorder will enter the searching mode. 3. Press the CAM (SET) button. The VMD search window will be displayed on the moni- tor. 4. Enter a camera number and time range. Available controls and functions JogDial clockwise: Increments a parameter. JogDial counterclockwise:Decrements a parameter. + button: Increments a parameter. – button: Decrements a parameter. PLAY/PAUSE button:Executes the VMD search and returns to the upper menu. STOP button: Stops the VMD search. MON (ESC) or EXIT button:Cancels the VMD search and returns to the upper menu. 3D joystick upward ( D):Moves the cursor up. 3D joystick downward (C):Moves the cursor down. 3D joystick leftward (A):Moves the cursor to the left. 3D joystick rightward (B):Moves the cursor to the right.5. Press the CAM (SET) button. The motion detection area setup window will be dis- played. Note:If no image was recorded in the time range set in step 4, the motion detection area setup window will not be displayed. 6. Select SETUP AREA on the status bar by performing either of the following. •Rotate the JogDial clockwise or counterclockwise. •Press the + or – button. A + mark will appear at the center of the monitor. Note:To set all displayed areas as motion detection areas, press the CAM (SET) button after selecting ALL AREAS. 7. Move the + mark to a desired area with the 3D joy- stick, and then press the CAM (SET) button. The start point of motion detection area will be determined. 8. Move the + mark to another desired area with the 3D joystick, and then press the CAM (SET) button again. The end point of motion detection area will be deter- mined. 9. To configure more motion detection areas, repeat Step 7 and 8. (Up to 4 motion detection areas are available.) START CAMERA JAN CAM1 103 SET : [SET] SEARCH : [PLAY] CANCEL : [ESC] 12 00 ■ SELECT CAMERA & DATE ..:AM END JAN 1 03 12 00..:AM TIME&DATE 01ch 01ch 01ch 01ch 01ch 01ch 01ch 01chCAM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM TIME&DATE SEARCH REC EVENT SEARCH VMD SEARCH MARK VMD SEARCH TOTAL APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM12345
Note:To delete the motion detection area, select DELETE AREA on the status bar by rotating the JogDial or pressing the +/– button. Then, move the + mark to the desired area with the joystick, and press the CAM (SET) button. 10. Select SENSITIVITY on the status bar by performing either of the following. •Rotate the JogDial clockwise or counterclockwise. •Press the + or – button. Note:Depending on the position of the set detection areas, the sensitivity indications of the detection areas may be displayed overlapping each other. 11. Select the motion detection area by moving the 3D joy- stick to the right or left. 12. Select the sensitivity by moving the joystick upward or downward. The sensitivity will be applied. OFF:The motion detector is not activated on the camera channel. LOW:The sensitivity level is low. MID:The sensitivity is level is medium. HIGH:The sensitivity level is high. 13. To exit the motion detection area setup window, press the CAM (SET) button. The motion detection mode setup window will be dis- played on the monitor. Notes: •To cancel the motion detection area setup, press the MON (ESC) button. The monitor display will return to the upper menu. •Refer to the units operating instructions for details on each detection mode. 27 14. Select a desired detection mode with the 3D joystick, and select a desired parameter by performing either of the following. •Rotate the JogDial clockwise or counterclockwise. •Press the + or – button. 15. Press the CAM (SET) or PLAY/PAUSE button. The motion detection mode will be determined, and the VMD search list window will be displayed again on the monitor. Notes: •Refer to Step 2 for the screenshot. •To cancel the setting and return to the motion detection area setup window, press the MON (ESC) or EXIT button. 16. Select a desired recording event by performing one of the following. •Move the 3D joystick controller up or down. •Rotate the JogDial clockwise or counterclockwise. •Press the + or – button. Note:To move to the next or previous page, perform either of the following. •Move the zoom wheel controller to the right or left. •Rotate the shuttle ring clockwise or counterclock- wise. 17. Press the PLAY button. The playback of selected recording event will start. 18. To exit the search mode, press the MON (ESC) or EXIT button. The live image will be displayed again on the monitor. • Marking search The recording time of the recorded images with a marked point will be displayed in a list or a thumbnail. For playback, you will select the desired recording time to play. (Refer to the recorders operating instructions for details on marking.) 1. Enter the recorder mode. (Refer to p. 19 Recorder Mode.) 2. Repeat pressing the SEARCH/T&D SEARCH button until the marking list window is displayed on the moni- tor. The recorder will enter the searching mode. VECTOR ANY AREA MASKING DURATION SET : [SET] SEARCH : [PLAY] CANCEL : [ESC] 20 ■ VMD SEARCH s DURATION 24H A 20sB20sCD 20sA20sB20sC20sD TIME&DATE 01ch 01ch 01ch 01ch 01ch 01ch 01ch 01chCAM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM TIME&DATE SEARCH REC EVENT SEARCH VMD SEARCH MARKTOTAL APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM12345
28 ■Disk Selection You will specify a disk of recorder for search playback. 1. Enter the recorder mode. (Refer to p. 19 Recorder Mode.) 2. Press the MENU button repeatedly repeatedly until HD300 DiskSelect appears on the LCD. 3. Press one of the F1 to F4 buttons. The specified disk will be selected. Available buttons and functions F1: Nr-A Specifies the normal or event recording area for play- back. F2: Cp-A Specifies the copy area for playback. F3: Cpy1 This button is reserved for future use. F4: Cpy2 This button is reserved for future use. MON (ESC) Cancels search playback and recovers the default LCD status. EXIT Cancels search playback and recovers the default LCD status. 4. When you specify a disk, the search list display will appear on the active monitor, and Search Mode menu will appear on the LCD. Then, perform the search play- back operation. (Refer to p. 23 Search Playback.) ■A - B Repeat Playback You can playback the recorded images repeatedly by specifying the start point (A) and end point (B). 1. Enter the recorder mode. (Refer to p. 19 Recorder Mode.) 2. Press the MENU button repeatedly until HD300 A – B repeat appears on the LCD. 3. Select the desired marked time by performing one of the following. •Move the 3D joystick controller up or down. •Rotate the JogDial clockwise or counterclockwise. •Press the + or – button. Note:To move to the next or previous page, perform either of the following. •Move the zoom wheel controller to the right or left. •Rotate the shuttle ring clockwise or counterclock- wise. 4. Press the PLAY button. The playback of selected recording event will start. 5. To exit the search mode, press the MON (ESC) or EXIT button. The live image will be displayed again on the monitor. • Thumbnail window To change a list (recording event list, VMD search list, or marking search list) to the thumbnail, press the F1 button. The monitor display will become as follows. Available controls and functions Shuttle ring clockwise: Moves to the next page. Shuttle ring counterclockwise:Moves to the previous page. JogDial clockwise or counterclockwise:Moves the cursor. + or – button:Moves the cursor. PLAY/PAUSE button:Starts playback of the record pointed by the cursor. MON (ESC) or EXIT button:Exits the search mode and returns to the upper menu. F1 button:Changes the monitor display to the list. 3D joystick upward ( D):Moves the cursor to the left. 3D joystick downward (C):Moves the cursor to the right. 3D joystick leftward (A):Moves the cursor to the left. 3D joystick rightward (B):Moves the cursor to the right. Zoom wheel controller to the right:Moves to the next page. Zoom wheel controller to the left:Moves to the previ- ous page. HD300 DiskSelect 302 Nr-A Cp-A Cpy1 Cpy2 Search Mode /HD300 Thumb Text Copy HD300 A—B Repeat 303 Start End Cancel
29 Note:To cancel the setting and exit HD300 A – B repeat, press the MON (ESC) or EXIT button. The LCD display will return to the default status. 3. During playback, press the F1 button at the point you wish to start playback. The playback start point (A) will be set. Note:To cancel the start point, press the F4 button. 4. Press the F2 button at the point you wish to end play- back. The playback end point (B) will be set, and the repeat playback will be performed between (A) and (B). ■Canceling Filters During the filtering playback, the searching filter will be temporarily canceled or recovered. Notes: •This function is available only during filtering playback. •You can change the ON/OFF setting during playback and playback pause. 1. Enter the recorder mode. (Refer to p. 19 Recorder Mode.) 2. Press the MENU button repeatedly until HD300 Listed appears on the LCD. Note:If the recorder is WJ-HD300 Series, B mark will light up beside Off in the default status. 3. Press the F2 button. The searching filter will be canceled, and B mark will light up beside Off. Notes: •To recover the searching filter, press the F1 button. The searching filter will be recovered, and B mark will light up beside On. •To cancel the setting and exit HD300 Listed, press the MON (ESC) or EXIT button. The LCD display will return to the default status. HD300 Listed 304 On Off ■Electronic Zooming (EL-ZOOM) The operations are the same as WJ-HD500 Series. (Refer to p. 21.) Note:2 x and 4 x are available zooming range. 8 x is unavailable. ■System Function 1. Enter the recorder mode. (Refer to p. 19 Recorder Mode.) 2. Press the CAM FUNC/SYS FUNC button while holding down the SHIFT button. The system function of recorder will be executed. Notes: •Refer to the operating instructions of recorder for details on available functions and function numbers. •If you have entered a wrong function number (other than 1 to 999), Prohibited will appear on the LCD for three seconds. Then, the LCD will return to the former status. ■Playing the Latest Recorded Image 1. Enter the recorder mode. (Refer to p. 19 Recorder Mode.) 2. Press the GO TO LAST button during the playback. The latest recorded image will be played back. ■Marking 1. Enter the recorder mode. (Refer to p. 19 Recorder Mode.) 2. Press the MARK button during the playback. The playback start point will be marked. Note:The marked playback images will be listed in the marking list window. Refer to p. 27 Marking search for how to play back. ■Displaying Camera Titles 1. Enter the recorder mode. (Refer to p. 19 Recorder Mode.) 2. When you press the OSD button, the OSD display will change. Note:Refer to the recorder’s operating instructions for details on operations. HD300 Listed 304 On Off
30
WJ-HD200 SERIES CONTROL (TERMINAL MODE)
Matrix switcher can control the following functions of Digital
Disk Recorder WJ-HD200 Series. The following is the pro-
cedure of WJ-HD200 Series SETUP MENU.
Notes:
•The following operating procedures are for the terminal mode.
If you are using a PS·Data system controller, refer to p. 36.
•When a Multiplexer board is installed in the matrix switch-
er, you can neither connect nor control a WJ-HD200 Series
recorder. You need to remove the board from the matrix
switcher.
■Displaying WJ-HD200 Series
SETUP MENU
The operations are the same as WJ-HD500 Series. (Refer to
p. 18.)
■Controlling Digital Disk
Recorder WJ-HD200 Series
The following are the operating procedures of WJ-HD200
Series via system controller.
Note: Refer to the operating instructions of Digital Disk
Recorder WJ-HD200 Series for details.
●Recorder Mode
The operations are the same as WJ-HD500 Series. (Refer to
p. 19.)
●Multiscreen Segment Switching
The operations are the same as WJ-HD500 Series. (Refer to
p. 19.)
Note:4C-, 4D-, 7-, 10-, 13- and 16-segment multiscreen
display patterns are unavailable.
●Normal Playback
The operations are the same as WJ-HD500 Series. (Refer to
p. 19.)
Note:You cannot skip to the previous/next record.
●Manual Recording
The operations are the same as WJ-HD500 Series. (Refer to
p. 20.)
Note:Refer to WJ-HD200 Series Operating Instructions for
details and other recording modes.
●Stopping REC ONLY Alarm
Recording
The operations are the same as WJ-HD500 Series. (Refer to
p. 20.)
●Search Playback
You can search playback images using the ALARM
RECALL table or the SEARCH table.
Every time you press the SEARCH/T&D SEARCH button,
the display will change as follows.
Live image
→Date-and-time entry form →ALARM RECALL
table
→Live image
• Date-and-time Search Playback
The recorded images can be searched for through the date
and time.
1. Enter the recorder mode. (Refer to p. 19 Recorder
Mode.)
2. Press the SEARCH/T&D SEARCH button. The date-and-
time entry form will appear on the center of the monitor.
Note:The factory default setting is the current date and
time.
SEARCH
YYYY/MM/DD HH:MM
2002/05/07 19:32