Panasonic Ramsa Audio Mixer Wr Da7 Users Guide

8-3 SURROUND Window, Multi-Channel View
In this view, you can display the current channel on the left of the window
and another channel on the right. Parameters can only be adjusted on the
currently selected channel. Also, the surround sound parameters can be
copied only from the currently selected channel to the reference channel.
The [SURROUND] multi-channel view window has all the functionality of any
multi-channel view window.
For more details, refer to Section 5-5, CHANNEL Window, Multi-channel...

Chapter 8 
DA7 Users’ Guide8-138
Pan/Assign
Surround
The following functions are not available when the [SURROUND]multi-
channel view window is displayed:
[RETURN]
[REPEAT]
[REVERSE]
Selection of Reference Channel
The [REFER] (reference) field displays the name of the channel being
auditioned (inputs 1 through 32 and aux returns 1 through 6). 

DA7 Users’ Guide9-1
9
Dynamics/
Delay
9-1 Overview
The DA7provides a built-in dynamics processor. Channels 1 through 32,
buses 1 through 8, and MASTER L/Rcan all have either Compression +
Gating, or Expansion. Delay attributes can also be added to Channels 1
through 32.
An internal fifty memory [DYNAMICS] library has been added so that you
can create and archive custom presets and instantly recall them.  You can also
store and recall an unlimited number of them from a computer using MIDI
library...

Section 9-2 DYNAMICS/DELAY Section Controlsexplains how to use the
DA7 Top Panel controls to edit parameters. 
Section 9-3 DYNAMICS Windowand Section 9-4 DYNAMICS Window,
Multi-Channel View describe the software funtions. 
Section 9-5 DYNAMICS Library Windowexplains how to save and recall
presets from the dynamics library.Chapter 9 
DA7 Users’ Guide9-2
9
Dynamics/
Delay 

9-2 DYNAMICS/DELAY Section Controls
You can discretely provide dynamics processing to a selected channel. The
two knobs in the DYNAMICS/DELAY section of the Top Panel are labeled
and  , which correspond to surround sound parameters, but are also
used to adjust the various dynamics attributes as indicated.
Knob
The  knob adjusts the[GATE] THL(threshold) and AT K(attack), as well
as the [COMPRESSOR] THL (threshold), ATK (attack), and DLY (Delay)
parameters. When the  mode is selected in the [SURROUND]...

PARAMETER SELECTButton
Pressing the PARAMETER SELECTbutton changes the parameters to be
adjusted by the  and  knobs. Repeated pressing of this button cycles
the four choices: threshold or ratio—>attack or release—>delay or gain_
>
threshold or release. The appropriate LED will light (orange) showing which
set of parameters are in use: THLand RATIO, AT Kand RLS, DLYand GAIN.
No LED will light when the THLand the RLSare in GATEmode. 
Additionally, when in GATE mode, the top knob toggles between THL...

DYNAMICS ONLED Button
This LED button switches the dynamics for a selected channel on (green) or
off. Press the DYNAMICS ONLED button to toggle between on and off.
DELAY ONLED Button
This LED button switches the delay for a selected channel on (green) or off.
Press the DELAY ONLED button to toggle between on and off.
Chapter 9 
DA7 Users’ Guide9-5
9
Dynamics/
Delay 

Chapter 9 
DA7 Users’ Guide9-6
9
Dynamics/
Delay
9-3 DYNAMICS Window
Press the  knob in the DYNAMICS/DELAY section to display the
[DYNAMICS] window. Or, cursor to the [DYN] area graph in the [CHANNEL]
window, and press the ENTERbutton to display the [DYNAMICS] window.
Or, when the [AUTO DISP CHANGE]selection in the [UTILITY>CONFIG]
window is  , pressing an LED button or adjusting a knob in the
DYNAMICSsection will automatically display the [DYNAMICS] window.
The [DYNAMICS] window reflects the current...

Chapter 9 
DA7 Users’ Guide9-7
9
Dynamics/
Delay
[FUNCTION]Area 
This area is where you choose either compressor + gate mode, or expander
mode. Activate the  button to control the parameters for the
compressor + gate. Activate the  button to control the parameters
for the expander.
[STEREO LINK] Area
The stereo link setting defines the relationship between channels in a stereo
pair when making gain adjustments to the channels. Cursor to this area, and
use the JogDial to scroll the stereo link selections...

Chapter 9 
DA7 Users’ Guide9-8
9
Dynamics/
DelayButton
When the  button is on, it will appear as inverse video, and change the
scale of the dynamics graph from OL to -100, to OL to -50. Any changes to the
dynamics settings will appear in the graph area beneath the  button.
[GAIN REDUCTION]Area
When a selected signal is input in the [COMP+GATE]mode, gain reduction
for that input signal is graphically displayed on the [GR]Meter. The amount
of gain is referenced by twin arrows on either side of the gain bar...