Panasonic Ramsa Audio Mixer Wr Da7 Users Guide

[METER>SLOT]Window
This window has meters for [SLOT 1], [SLOT 2], and [SLOT 3], and sets
meter operation modes adjustments for [RESPONSE], [POSITION], and
[PEAK HOLD].
For additional technical specifications, refer to Appendix F, Technical
Specifications.
The [RESPONSE], [POSITION], and [PEAK HOLD] operations are the
same as in the [INPUT 1-32] window.Chapter 5 
DA7 Users’ Guide5-19
5  
Channels,
Library, & Meters
METER>SLOT Window 

5-5 ChannelWindow, Multi-Channel View
In the Multi-Channel View window, which is selected by the Multi CH View
button on the Display Bridge, the selected channel appears in a split screen.
On the left side of the window you will see the selected channel, and on the
right, you can choose a channel. 
When a channel and its data are copied to another channel, all its attributes
are transferred. Any conditions on the second channel will be overwritten,
such as EQ, PA N, DYNAMICS/DELAY, AUX,and Channel Onand...

[MUTE]Button
This button selects a Mute Group, and has the same function as the
[MUTE GRP]area in the [CHANNEL] window.
[LINK]Button
This button has the same function as the  button in the [LINK]
area in the [CHANNEL] window. Selecting it will turn stereo pairing
or .
There is an additional function of the Multi-Channel View button. If you are
looking at either the EQ or DYNAMICS section of a selected channel on the
LCD screen, you can only copy the selected EQ or DYNAMICS settings for
that channel to...

DA7 Users’ Guide6-1
6
Fader Layers
Channel Strips
6-1 Fader Layers
The Fader Layersection is where you select the current function you want
to use for the Channel Strips. When you change layers, the DA7updates the
fader positions to reflect the current status of the channel levels for that
layer. Any of the Channel Stripsin that layer can now be edited.
The INPUT 1-16LED button when selected (green)controls analog inputs 1
through 16, and buses 1, 3, 5, and 7. The INPUT 17-32LED button when
selected...

INPUT 1-16LED Button
When you press this button on (green), the faders reset to control analog
inputs 1 through 16, and buses 1, 3, 5, and 7, unless previously flipped. To
reset a flipped Channel Fader Strip, press the FLIP button. To reset all the
currently flippedChannel Fader Strips, press and hold the INPUT 1-16
LED button for two seconds.
INPUT 17-32LED Button
When you press this button on (red), the faders reset to control inputs 17
through 32, and buses 2, 4, 6, and 8, unless previously flipped....

Chapter 6 
DA7 Users’ Guide6-3
6
Fader Layers
Channel Strips
6-2 Channel Strip
Each Channel Striphas several tools that assign and control parameters for
that channel.
MIC/LINE INPUTKnob
The MIC/LINE INPUTknobs, located at the top of each Channel
Strip, adjust the channel input signal level. They only control
analog inputs 1 through 16. When the Channel Stripis used in
any fader layer except INPUT 1-16, the MIC/LINE INPUTknob
has no effect, unless, when in the CUSTOM/MIDI Fader Layer,
there are audio...

LED Status Indicators
These LEDs show whether AUX 1-6or automation parameters
(FADER, CH, EQ, PAN/SURR, LIBRARY, and SEL/MAN) are on.
The LED status indicators can be toggled by pressing the
AUTOMATION/AUXLED button. The LEDs will flash (red)when
[AUTOMATION]is enabled in the [AUTOMATION>EXECUTE]
window. When an automation event is currently recording, the
affected LEDs will remain illuminated (red). The LEDs will flash
(green) when an automation is currently playing. Automation
function indicators will...

LIBRARY orAUX 5LED
The LED color indicates whether the selected channel is assigned to
either AUX 5or to LIBRARY automation. When nothing is assigned, the
LED is not lit.
SEL/MAN orAUX 6LED
The LED color indicates whether the selected channel is assigned to
either AUX 6or to SEL/MAN (select/manual) automation. When
nothing is assigned, the LED is not lit.
SOLO LED Button
Use the solo function to monitor a single channel or multiple channels via
the MONITOR Aoutputs. When a SOLO LED button is on (red),...

SELECTLED Button
When a SELECT LED button is pressed ON (orange) for a Channel Strip, it
becomes the current channel in the LCD screen as displayed in the [taskbar].
Pressing once the SELECTLED button takes you to the [CHANNEL]
window if you are in the [SOLO MONITOR], [D-I/O], [MIDI],or [UTILITY].
While [METER], [EQUALIZER], [PAN/ASSIGN/SURROUND]or
[DYNAMICS/DYNAMICS]is displayed, pressing this twice takes you to the
[CHANNEL]window.
This button also sets LINKor STEREOpairs if you press the adjacent...

DA7 Users’ Guide7-1
7
Equalizer
7-1 Overview
This chapter provides information on the EQUALIZER section of the Top
Panel and the [EQUALIZER] window group selections. A 4-band parametric
equalizer is available for each of the 32 channels, each of the 8 buses, and
MASTER L/R. A 2-band parametric equalizer is available for each of the six
aux returns. There are no parametric equalizers provided for the six aux
sends, which is not a problem because you can apply equalization to the
channel prior to assigning...