Panasonic Ramsa Audio Mixer Wr Da7 Users Guide

Section 7-2 EQUALIZER Sectiondetails the controls and buttons accessible
on the Top Panel of the DA7.
Section 7-3 EQUALIZER Windowprovides information on the various
elements and areas of the [EQUALIZER] window. 
Section 7-4 EQUALIZER Library Windowcovers the library memory
functions that are available for storing and recalling equalizer settings. This
library is accessible via the LIBRARY STORE/RECALLbuttons.
Section 7-5 EQUALIZER Window, Multi-Channel Viewcontains additional
information that is unique...

Chapter 7 
DA7 Users’ Guide7-3
7
Equalizer
7-2 EQUALIZER Section
The primary settings for the equalizer can be accessed on the Top Panel
while the LCD screen continues to display the [CHANNEL] window.
Although this [CHANNEL] window functionality is convenient when you are
making general equalizer adjustments, to aid you in understanding the
following information, please follow these steps to access and activate the
controls in the EQUALIZER section:
Press the  knob in the EQUALIZER section to display the...

There are three knobs and four frequency band LED buttons in the
EQUALIZER section, which are used to modify the frequency characteristics
of the selected channel. The EQ ONLED button toggles the equalizer on
(green)and off. When on, frequency adjustments set with the controls are
active on the selected channel.
The three knobs are labeled Q(quality), FREQ(frequency), and GAIN
(gain). The additional labeling of  (left),  (surround left), and 
(surround bass) identify the surround sound parameters that...

This knob is also a shortcut to the selection of filter types. When the Hor L
band of the EQUALIZER is selected, pressing this knob cycles through the
three filter types for these bands.
This knob also acts as a level adjustment in a surround sound mix. The 
knob controls the level for the surround sound left output by adjusting the
send level of the selected channel to the surround sound BUS 1.
FREQ or Knob
The FREQknob sets the frequency point of the currently selected band. A
vertical line will move...

7-3 EQUALIZER Window
The [EQUALIZER] window has several areas of functionality. Use the
ARROWbuttons or JogDialto access the parameters in the windows. The
data fields, graph, and soft knob positions update in real time to show the
adjustment results.
[EQ]Button
Using the ARROW buttons or JogDial, cursor to the [EQ] area, and press the
ENTERbutton to switch the equalizer  .
Button
If there are any adjustments in any of the EQ parameters, pressing the 
button will reset all of them to a flat reference (no...

Filter Types
The DA7 equalizer can be used in several modes, parametric, high and low
pass filtering, and shelving. Cursor to one of the filter type buttons, and press
the ENTERbutton.
PEQ Buttons
The [PEQ] filter type is the default setting.
HPF Filter Button
The [HPF](high pass filter) cuts off low frequencies and lets high
frequencies pass. The Q factor is not applicable here, since everything
below the assigned frequency is cut off. In the [LOW] band the  (gain)
soft knob sets the filter on or off,...

7-4 EQUALIZER Library Window
This window shows the [EQ LIB](equalizer library) functions and status of a
selected channel. You can edit, store, and recall presets from the EQ library.
Pressing the LIBRARY RECALLor STOREbuttons on the Top Panel
displays the [EQ LIB]window.
Library Window Elements
Button
Use this button to store library settings without displaying the Name Editor.
When  is on, a setting is stored with the name [NoTitle##A]. This
setting can later be recalled and renamed by using the...

Button
Activating this button stores the current EQ settings into one of the fifty
memories. The [NAME EDITOR]window pops up, prompting you to name
the new preset. After naming it, scroll to the  button, and press the
ENTER button. The MEMORY numeric readout will flash for two seconds,
indicating that you have written to the memory. The library comes with all
presets named INITIAL *.
Button
Activating this button initializes the current memory to the factory settings.
When cursoring to this button, you...

7-5 EQUALIZER Window, Multi-Channel View 
While an [EQUALIZER] window is displayed on the LCD screen, press the
MULT CHbutton on the Display Bridgeto change the display to the multi-
channel view. This window shows the selected channel on the left side of the
LCD and a reference channel on the right. Only the selected channel can be
modified. However, you can copy entire settings either way.
Multi-channel View Window Elements
Button
Activating this button copies the EQ parameters from the currently...

DA7 Users’ Guide8-18
Pan/Assign
Surround
8-1 PAN/BUS ASSIGN Controls
This section explains access to the PAN and 5.1 surround sound controls,
and the assignment of L/R, DIRECT, and BUSES 1-8for a selected channel.
The ON LED button in this section only switches the pan on (red)or off for
odd and even selected buses. It has no effect on DIRECTassignments. Pan is
always active for the L/Routputs. Pressing the PA Nknob displays the [PAN/
SURROUND] window on the LCD. It also controls the level for the...