Panasonic Ramsa Audio Mixer Wr Da7 Users Guide

Chapter 5 
DA7 Users’ Guide5-9
5  
Channels,
Library, & Meters
Pan Adjustment for a Selected Channel
Adjust the pan for a selected channel by selecting the pan soft knob with
the cursor, and turning the JogDial. Or, turn the Pan knob in the
PAN/SURROUNDarea.
Pan Adjustment of an Adjacent Channel
When  is active, the knob for the odd-numbered channels appears
on the left of the area, and the knob for the even-numbered channels
appears on the right.
Cursor to a soft knob, and turn the JogDial. A pan value...

The buttons in the [ASSIGN] area mimic the LED buttons in the PAN/ASSIGN
BUS ASSIGNsection. For example, the  button in the [ASSIGN]
area of the LCD has the same function as the 1 LED button in the
BUS/ASSIGNsection on the DA7 Top Panel. When the assignment is active,
the relevant LED is on (green). When the assignment is off, the related LED
goes off. If a selected channel is set for stereo, bus numbers are paired in the
[ASSIGN] area of the window.
See Chapter 8for more information on ouput assignments...

Chapter 5 
DA7 Users’ Guide5-11
5  
Channels,
Library, & Meters
[DLY] Area
The [DLY] (delay) area soft knob and data fields are seen only when channels
1 through 32 are selected.
Pressing the [DLY] area  or button will disable or enable delay for
the selected channel. Use the JogDialto adjust the delay value for increased
fine tuning. You can adjust either the msec area or the sample area.The range
of the delay is from 0 to 300 msec.
You can input the values directly using the Keypad when the [10KEY...

5-3 Library Windows
The three libraries in the DA7each contains fifty memories, the channel
library, the equalizer library, and the dynamics library.
To access the Library windows, first press the function selection buttons on
the TopPanel.Press the CHANNELbutton in the MASTER DISPLAY
section for the [CHANNEL]window. Press the GAINknob in the
EQUALIZERsection for the [EQUALIZER]window or the SRknob in the
Dynamics/Delaysection for the [DYNAMICS]window. 
Then press either the [RECALL]or [STORE]button in...

Chapter 5 
DA7 Users’ Guide5-13
5  
Channels,
Library, & Meters
If the [EQUALIZER]window is currently displayed on the LCD, pressing
either the STOREor the RECALLbutton in the LIBRARYsection of the Top
Panel will display the [EQ LIB]window. Pressing either the STOREor
RECALLbutton again will return the window to the [EQUALIZER].
If the [DYNAMICS]window is currently displayed on the LCD, pressing
either the STOREor the RECALLbutton in the LIBRARYsection of the Top
Panel will display the [DYN LIB]window....

Library Window Elements
List Area
This area indicates the numbers and titles of the fifty library memories for the
current library window.
Button
Use this button to store library settings without displaying the Name Editor.
When  is activated, a setting is stored with the name [NoTitle##A].
This setting can later be recalled and renamed by using the  button.
Data is automatically stored to the currently selected library memory. 
The MEMORY numeric readout on the Display Bridgeblinks for three
seconds,...

Chapter 5 
DA7 Users’ Guide5-15
5  
Channels,
Library, & Meters
The MEMORY numeric readout on the Display Bridgeblinks for three
seconds, displaying the selected library memory number during the storage
process.
Button
This button clears the current memory settings. Cursorto the  button,
and press the ENTERbutton to delete the contents of the selected memory.
Button
This button opens the [NAME EDITOR]window where you can enter a
name for the selected memory, using up to ten characters. Cursorto the...

Library Memory Selection
When an element in the [Library Data]area is selected with the cursor, you
can rotate the JogDialto scroll the memory list. Position the desired
memory in the current field of the list area. The desired memory will move to
the current field of the list in the window.
Library Reference Function
Cursorto the [Reference]button in the [Library Data]area of the [CH LIB]
window, and press the ENTERbutton to activate the reference function. The
parameter settings stored in the current...

Chapter 5 
DA7 Users’ Guide5-17
5  
Channels,
Library, & Meters
5-4 METERGroup Windows
[INPUT 1-32]Meter Window
Pressing the  button on the Top Panel displays the last window
used from the [METER]group, ([INPUT 1-32], [BUS/AUX], or [SLOT]).
Repeated presses of the  button will display the windows in this
order.
This window shows the meters for the 32 input channels and allows for level
adjustments.
[INPUT 1-16], [INPUT 17-32] Areas
These areas show the signal input levels of all 32 channels...

[PEAK HOLD]Area
This area sets the peak hold  or  . Cursorto the selection button, and
press the ENTER button. Peak hold dots will appear on the meter. The
current peak hold levels appear in the data fields of the [PK] area. When
,hold time is 0.3 seconds. When  (infinity) is selected, the peak hold
indicator remains until overwritten by a new peak level or is turned  .
When the SELECT LED button of any channel is pressed, the [METER]
window for the selected channel appears.
Cursor to the  or the  button...