Panasonic Projector Pt Lb30ntu Operating Instructions
Have a look at the manual Panasonic Projector Pt Lb30ntu Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
ENGLISH-31 Useful functions ENTER PROJECTOR VOLUME D.ZOOMSTDMENU AUTO SETUP SHUTTERFREEZE INDEX WINDOW The remote control unit functions during INDEX WINDOW Press the For Gbutton to select a screen size. It can switch to three stages. Still pictureMoving pictureStill pictureMoving pictureStill pictureMoving picture Press the I I or H H button to switch between the still picture screen and moving picture screen. Press the ENTER button to capture the present moving picture in a still window. Press the MENU button to return to the previous screen. Still pictureMoving pictureMoving pictureStill picture Displaying two screens (INDEX WINDOW) This function lets you store a picture which is being projected into memory, so that you can display a still picture and a moving picture on the screen. BThe aspect ratio of the screen changes and the image is vertically elongated in comparison to a normal image. B When NETWORK is selected, the screen display will be switched between four window style, index style, and 16 Index style. (PT-LB30NTU only. Refer to the accessory CD-ROM for details.) Press the INDEX WINDOW button. NOTE: BWhen the screen size is changed, the picture’s aspect ratio will also change. Make sure that you fully understand the notes on “ASPECT” on page 43 before using the “INDEX WINDOW” function. B“INDEX WINDOW” on the “MAIN MENU” is the same function. Still pictureMoving picture
32-ENGLISH
On-screen menus
Menu screens
The various settings and adjustments for
this projector can be carried out by
selecting the operations from on-screen
menus.
The general arrangement of these menus
is shown below.
MAIN MENU
MENU
KEYSTONE
PICTURE
POSITION
INDEX WINDOW
SHUTTER
VOLUME
LANGUAGE
OPTION
SECURITY
NETWORK
SELECT
ENTER EXIT
PICTURE
PICTURE MODE DYNAMIC
CONTRAST 32
BRIGHT 32
SHARPNESS 0
COLOR TEMP. STANDARD
W-BAL R 32
W-BAL G 32
W-BAL B 32
DAYLIGHTVIEW
AI ON
SIGNAL MODE XGA
STANDARD
SELECT ADJ RETRN
PICTURE menu (page 37)
When an RGB signal is being input
or NETWORK is selected
PICTURE
PICTURE MODE STANDARD
CONTRAST 32
BRIGHT 32
COLOR 32
TINT 32
SHARPNESS 6
COLOR TEMP. STANDARD
DAYLIGHTVIEW
AI ON
SIGNAL MODE 480p
STANDARD
SELECT ADJ RETRN
When a YPBPRsignal is being input
PICTURE
PICTURE MODE STANDARD
CONTRAST 32
BRIGHT 32
COLOR 32
TINT 32
SHARPNESS 8
COLOR TEMP. STANDARD
DAYLIGHTVIEW
AI ON
TV-SYSTEM AUTO
STILL MODE OFF
STANDARD
SELECT ADJ RETRN
When an S-VIDEO/VIDEO
signal is being input
KEYSTONE correction (page 36)
KEYSTONE 0
BPress the MENU button to
display the “MAIN MENU”.
Refer to page 34 for details on
how to operate the on-screen
menus.BWhen NETWORK is
selected, “W-BAL R/G/B”
settings will not be displayed.
(PT-LB30NTU only)
ENGLISH-33
Adjustments and settings
POSITION menu (page 41)
OPTION
OSD ON
AUTO SEARCH ON
AUTO SIGNAL ON
AUTO KEYSTN ON
RGB2 SELECT INPUT
RGB/YP
BPR AUTO
VGA60/480p 480p
SXGA MODE SXGA
NR OFF
BLACKBOARD OFF
yyyyyyyyyyyyyyyyyyyyÝ SELECT ADJ RETRN
OPTION menu (page 45)
OPTIONyyyyyyyyyyyyyyyyyyyyÛBACK COLOR BLUE
FRONT/REAR FRONT
DESK/CEILING DESK
FAN CONTROL STANDARD
LAMP POWER HIGH
LAMP RUNTIME 10H
FUNC 1 DAYLIGHT
CONTROL KEY ON
AUTO POW.OFF DISABLE
POWER MEMORY ON
SELECT ADJ RETRN
SECURITY
INPUT PASSWD OFF
AMEND PASSWD
TEXT DISPLAY OFF
TEXT CHANGE
SELECT
ADJ RETRN
SECURITY menu (page 49)
POSITION
POSITION
DOT CLOCK 32
CLOCK PHASE 16
ASPECT 4:3
RESIZING ON
FRAME LOCK OFF
STANDARD
SELECT ENTER RETRN
BWhen an S-VIDEO/VIDEO signal
is being input, “DOT CLOCK”,
“CLOCK PHASE” and “FRAME
LOCK” settings will not be
displayed.
LANGUAGE ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
ITALIANO
PORTUGUÊS
SVENSKA
NORSK
DANSK
POLSKI
CESTINA
MAGYAR
yyyyyyyyyyyyyyyyyyyyÝ SELECT ENTER RETRN
LANGUAGE ENGLISH
yyyyyyyyyyyyyyyyyyyyÛ
ENGLISH ¤
ÔŠ
SELECT ENTER RETRN
LANGUAGE menu (page 44) INDEX WINDOW function
(page 31)
SHUTTER function (page 29)
VOLUME adjustment
Press the ENTER button, and
then press the Ior Hbutton
to adjust the volume.
NETWORK
NETWORK 1
NAME CHANGE LB30NT
INPUT PASSWD OFF
AMEND PASSWD
WEB CONTROL ON
STATUS
DEFAULT
SELECT ENTER RETRN
NETWORK menu (page 51)
(PT-LB30NTU only)
34-ENGLISH
#Press the MENU button.
The “MAIN MENU”
will be displayed.
$Press the F F
or G G
button to select an item.
Selected item will
be displayed in
blue.
%Press the ENTER button to accept the
selection.
The selected
menu screen or
adjustment
screen will then
be displayed.
(Example:
“PICTURE”
menu)
ENTER
FREEZE
SHUTTER
INDEX
WINDOW
PROJECTOR VOLUME D.ZOOMSTD VIDEOINPUT POWER
RGB
AUTO
SETUPMENU
Menu operation guide
MENU
KEYSTONE
PICTURE
POSITION
INDEX WINDOW
SHUTTER
VOLUME
LANGUAGE
OPTION
SECURITY
NETWORK
SELECT
ENTER EXIT
MENU
KEYSTONE
PICTURE
POSITION
INDEX WINDOW
SHUTTER
VOLUME
LANGUAGE
OPTION
SECURITY
NETWORK
SELECT
ENTER EXIT
PICTURE
PICTURE MODE STANDARD
CONTRAST 32
BRIGHT 32
COLOR 32
TINT 32
SHARPNESS 8
COLOR TEMP. STANDARD
DAYLIGHTVIEW
AI ON
TV-SYSTEM AUTO
STILL MODE OFF
STANDARD
SELECT ADJ RETRN
NOTE:
BPress the MENU
button to return to
the previous
screen.Menu operation
(on connector panel)
ENGLISH-35
Adjustments and settings
&Press the F F
or G G
button to select
an item, and then press the I I
or
H H
button to change or adjust the
setting.
An individual adjustment screen
such as the one shown below will
be displayed for bar scale items.
The bar scale will turn green when
any adjustment changes the setting
from the factory set value.Unavailable on-screen
menu items
This projector has unadjustable
items and unusable functions
depending on the signal being
input.
When an item cannot be adjusted
or a function cannot be used, the
corresponding on-screen menu
display does not appear, and the
item or function will not work even
if the ENTER button is pressed.
Returning a setting to the factory default
If you press the STD (standard) button on the remote control unit, you can
return settings to the factory default settings. However, the operation of this
function varies depending on which screen is being displayed.
BWhen a menu screen is being
displayed
All items displayed will be returned
to their factory default settings,
“STD” will be displayed in the top-
right screen and the bar scale will
appear white.BWhen an individual adjustment
screen is being displayed
Only the item displayed will be
returned to the factory default
setting, and the bar scale will
appear white.
NOTE:
BYou can also select
“STANDARD” from the menu
screen and then press the
ENTER button.
PICTURE STD
PICTURE MODE STANDARD
CONTRAST 32
BRIGHT 32
COLOR 32
TINT 32
SHARPNESS 8
COLOR TEMP. STANDARD
DAYLIGHTVIEW
AI ON
TV-SYSTEM AUTO
STILL MODE OFF
STANDARD
SELECT ENTER RETRN
BRIGHT 32
BRIGHT 32
NOTE:
B
Triangle symbols above and below
the bar scale indicate the factory
default setting. Items which do not
have these triangle symbols
cannot be returned to the factory
default setting.
Indicates the standard factory
default setting
Indicates the current
adjustment value
BThe positions of triangle
symbols vary depending on the
type of signal being input.
36-ENGLISH Correcting keystone distortion Keystone distortion is corrected automatically when the projector’s automatic setup function is used, but this correction will not apply if the screen itself is tilted. In such cases, you can correct the keystone distortion manually with the following procedure. Vertical keystone distortion correction OperationPress the H H button.Press the I I button. KEYSTONE 0 NOTE: BIf you press the AUTO SETUP button after correcting the keystone distortion manually, the automatic keystone correction function will operate and the corrected picture will return to its previous incorrect condition. To prevent this from happening, you can set “AUTO KEYSTN” in the “OPTION” menu to “OFF”. (Refer to page 45.) BVertical keystone distortion can be corrected to ±30°of the angle of tilt. However, the greater the correction amount, the more the picture quality will deteriorate, and the harder it will become to achieve a good level of focus. To obtain the best picture quality, set up the projector and screen in such a way that the amount of keystone correction required is as minimal as possible. BThe picture size will also change when correction of keystone distortion is carried out. BThe ratio of length and width of an image may become incorrect depending on the amount of the keystone correction. BKeystone distortion of the on-screen display will not be corrected. Vertical keystone distortion correction only.
ENGLISH-37
Adjustments and settings
Press the For Gbutton on the
projector or remote control unit to
select an item, and then press the
Ior Hbutton to change the
setting.
For items with bar scales, press the
ENTER button or the Ior Hbutton
to display the adjustment screen,
and then press the Ior Hbutton
to make the adjustment.When an S-VIDEO/VIDEO signal is
being input
Adjusting the picture
PICTURE
PICTURE MODE DYNAMIC
CONTRAST 32
BRIGHT 32
SHARPNESS 0
COLOR TEMP. STANDARD
W-BAL R 32
W-BAL G 32
W-BAL B 32
DAYLIGHTVIEW
AI ON
SIGNAL MODE XGA
STANDARD
SELECT ADJ RETRN
PICTURE
PICTURE MODE STANDARD
CONTRAST 32
BRIGHT 32
COLOR 32
TINT 32
SHARPNESS 8
COLOR TEMP. STANDARD
DAYLIGHTVIEW
AI ON
TV-SYSTEM AUTO
STILL MODE OFF
STANDARD
SELECT ADJ RETRN
When an RGB signal is being input
or NETWORK is selected
PICTURE
PICTURE MODE STANDARD
CONTRAST 32
BRIGHT 32
COLOR 32
TINT 32
SHARPNESS 6
COLOR TEMP. STANDARD
DAYLIGHTVIEW
AI ON
SIGNAL MODE 480p
STANDARD
SELECT ADJ RETRN
When an YPBPRsignal is being
input
When NETWORK is selected,
“W-BAL R/G/B” settings will not be
displayed. (PT-LB30NTU only)
PICTURE MODE NATURAL
[
STANDARD [ DYNAMIC [ BLACK-BD
PICTURE MODE
Select the picture mode that best
matches the image source and
room conditions.
The mode best used in dark rooms
is “NATURAL”. For rooms having
regular lighting conditions in use,
select “STANDARD”. For
exceptionally bright rooms, use
“DYNAMIC”.
“BLACK-BD” is available only when
“BLACKBOARD” in the “OPTION”
menu is set to “ON”.
Select “BLACK-BD” when projecting
onto blackboards.
38-ENGLISH CONTRAST This adjusts the contrast of the picture. (Adjust the “BRIGHT” setting first if required before adjusting the “CONTRAST” setting.) The picture is bright: Ibutton The picture is dark: Hbutton BRIGHT This adjusts the darker areas (black areas) in the picture. Black areas are too light: Ibutton Dark areas are too solid: Hbutton COLOR (S-VIDEO/VIDEO/YPBPRonly) The color is too deep: Ibutton The color is too pale: Hbutton TINT (NTSC/NTSC 4.43/YPBPRonly) This adjusts the flesh tones in the picture. The flesh tones are greenish: Ibutton The flesh tones are reddish: Hbutton SHARPNESS To soften the picture details: Ibutton To sharpen the picture details: Hbutton COLOR TEMP. This is used to adjust the white areas of the picture if they appear bluish or reddish. White balance R/G/B (W-BAL R/G/B) (RGB only) This is used to adjust the white areas of the picture if they appear colorised. To make the selected color lighter: Ibutton To make the selected color stronger: Hbutton COLOR TEMP. STANDARD [ HIGH [ LOW
ENGLISH-39
Adjustments and settings
NOTE:
B“AI” is disabled when “LAMP
POWER” is set to “LOW”.
(Refer to page 47.)
NOTE:
B“W-BAL” is disabled when
“MODE” in “DAYLIGHTVIEW”
is set to “OFF”.
NOTE:
B“AUTO” may not function
correctly if any objects are
placed on the projector.
B“AUTO” will be disabled when
“FRONT/REAR” in the
“OPTION” menu is set to
“REAR”.
AI
ON
The lamp is controlled according to
the input signals to project images
with the best quality.
OFF
“AI” is disabled.
DAYLIGHTVIEW
This adjusts the vividness of the
projected images when the projector
is used under bright lighting.
Press the ENTER button to display
the “DAYLIGHTVIEW” screen.
AUTO
The vividness of the projected
images will be adjusted according to
the lighting condition of the room.
ON
The projected images will have the
highest vividness regardless of the
lighting condition of the room.
OFF
“DAYLIGHTVIEW” is disabled.
DAYLIGHTVIEW
MODE AUTO
W-BAL
SELECT
ADJ RETRN
MODE AUTO [ yON [ OFF
When fluorescent lamps are used
for room lighting.
When incandescent lamps are used
for room lighting.
W-BAL [
MODEW-BAL
40-ENGLISH
SIGNAL MODE
(RGB/YPBPR/NETWORK only)
This displays the type of signal
which is currently being projected.
Refer to the list on page 62 for
details on each type of signal.
sRGB is an international color
reproduction standard (IEC61966-2-
1) established by the International
Electrotechnical Commission (IEC).
If you would like the colors in sRGB-
compatible pictures to be
reproduced more faithfully, make
the following settings.
# #
Press the F F
or G G
button to
select “PICTURE MODE”, and
then press theI I
or H H
button
to select “NATURAL”.
$ $
Press the STD (standard)
button on the remote control
unit.
% %
Press the F F
or G G
button to
select “COLOR TEMP.”, and
then press theI I
or H H
button
to select “STANDARD”.
NOTE:
BsRGB is only enabled when
RGB signals are being input
(when “LAMP POWER” is set
to “HIGH”, “AI” is set to “OFF”,
and “MODE” in
“DAYLIGHTVIEW” is set to
“OFF”).
Projecting sRGB-
compatible pictures
STILL MODE
(S-VIDEO/VIDEO only)
To reduce flickering of still images
(vertical flicker), set “STILL MODE”
to “ON”. This should normally be set to
“AUTO”. If the signal is of such poor
quality that the correct format
cannot be automatically
distinguished, change the setting
manually to the required TV system.
TV-SYSTEM AUTO
[ NTSC
[ NTSC4.43
[ PAL
[ PAL-M
[ PAL-N
[ SECAM
TV-SYSTEM
(S-VIDEO/VIDEO only)
NOTE:
BWhen set to “AUTO”, the
projector automatically
distinguishes between
NTSC/NTSC 4.43/PAL/PAL60/
PAL-M/PAL-N/SECAM signals.
NOTE:
BSet to “OFF” when playing
back moving images.