Panasonic Projector PT-EW640 User Manual

Chapter 3 Basic Operations — Operating with the remote control
ENGLISH - 51
Operating with the remote control
For PT-EZ580, PT -EW640  
and PT -EX610 For PT
-EW540 
and PT -EX510
Switching the input
The input for projection can be switched.
 button
1) Press the input selection (, , , , , ) 
buttons.
 fThis operation can be also performed using the  button on the control panel.
Switches the input to RGB1 or RGB2. Switches to another input when one input has already been chosen.
 *1 Switches the input to...

Chapter 3 Basic Operations — Operating with the remote control
52 - ENGLISH
2) Press the  button again.
 fThe image and audio reappear.
* button
(Only for PT-EW540 and PT -EX510)
 button
1) Press the  button.
 fThe image and audio disappear.
 fThis operation can be also performed using the  button on the control panel.
2) Press the  button again.
 fThe image and audio reappear.
Attention
 fWhen the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [SHUTTER DETECTION] or [AV MUTE DETECTION] is set to [ON], do...

Chapter 3 Basic Operations — Operating with the remote control
ENGLISH - 53
Note
 f[FREEZE] is displayed on the screen when video is paused.
Using the on-screen display function
Turn off the on-screen display function (no display) when you do not wish the\
 viewers to see the on-screen display, such as the menu or the input terminal name.
 button
1) Press the  button.
 fThe on-screen display disappears.
2) Press the  button again.
 fThe on-screen display appears.
Note
 fIf you press the  button on the...

Chapter 3 Basic Operations — Operating with the remote control
54 - ENGLISH
 fImages may be disrupted for a few seconds during automatic adjustment, but it is not a malfunction. fAdjustment is required for each input signal. fAutomatic adjustment can be canceled by pressing the  button during the automatic adjustment operation. fIf the automatic setup function is used while moving images are being input, the adjustment may not be performed properly even for an RGB signal that can use automatic setup....

Chapter 3 Basic Operations — Operating with the remote control
ENGLISH - 55
Using the P IN P function
Locate a separate, small sub screen in the main screen to project two im\
ages simultaneously.
 button
1) Press the  button.
 fThe setting will change each time you press the button.
Note
 fRefer to the menu [P IN P] menu (x page 98) for details.
Using the function button
[SUB MEMORY], [SYSTEM SELECTOR], [DAYLIGHT VIEW], or [TEST PATTERN] operations can be assigned to the  button on the remote control so...

56 - ENGLISH
Chapter 4 Settings
This chapter describes the settings and adjustments you can make using t\
he on-screen menu.   

Chapter 4 Settings — Menu navigation
ENGLISH - 57
Menu navigation
The on-screen menu (Menu) is used to perform various settings and adjustments of the projector.
Navigating through the menu
Operating procedure
 button
1) Press the  button on the remote control or control panel.
 fThe [MAIN MENU] screen is displayed.
MAIN MENUPICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
P IN PTEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
MENU SELECT
SUB MENUENTER
2) Press as to select an item...

Chapter 4 Settings — Menu navigation
58 - ENGLISH
4) Press as to select a sub-menu, and press qw or the  button to change or adjust settings.
 fSome items will switch in order as follows each time you press qw.
ABC
 fFor some items, press qw to display an individual adjustment screen with a bar scale as shown be\
low.
0CONTRAST
ADJUST
Note
 fPressing the  button while the menu screen is displayed returns to the previous menu. fSome items may not be adjusted or used for certain signal formats to be input...

Chapter 4 Settings — Menu navigation
ENGLISH - 59
Main menu itemPage
[TEST PATTERN]100
[SIGNAL LIST]101
[SECURITY]104
[NETWORK]107
Sub-menu
The sub-menu of the selected main menu item is displayed, and you can se\
t and adjust items in the sub-menu.
[PICTURE] 
Sub-menu itemFactory defaultPage
[PICTURE MODE][STANDARD]62
[CONTRAST][0]62
[BRIGHTNESS][0]63
[COLOR][0]63
[TINT][0]63
[COLOR TEMPERATURE][DEFAULT]63
[GAMMA][0]65
[SHARPNESS][+6]*165
[NOISE REDUCTION][OFF]65
[IRIS]*2[OFF]*165
[DAYLIGHT...

Chapter 4 Settings — Menu navigation
60 - ENGLISH
[DISPLAY LANGUAGE] 
Details (x page 74)
[DISPLAY OPTION] 
Sub-menu itemFactory defaultPage
[COLOR ADJUSTMENT][OFF]75
[COLOR CORRECTION][OFF]75
[SCREEN SETTING]―76
[AUTO SIGNAL][OFF]76
[AUTO SETUP]―76
[RGB IN]―77
[DVI-D IN]―78
[HDMI IN]―78
[DIGITAL LINK IN]*1―79
[DisplayPort IN]*1―79
[ON-SCREEN DISPLAY]―79
[CLOSED CAPTION SETTING]―81
[BACK COLOR][BLUE]82
[STARTUP LOGO][DEFAULT LOGO]82
[SHUTTER SETTING]*1―82
[P-TIMER]―83
[FREEZE]―84
[DIGITAL ZOOM][1.5]84
*1...