Panasonic Projector PT-EW640 User Manual
Here you can view all the pages of manual Panasonic Projector PT-EW640 User Manual. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 91
![Page 91
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 91
[PROJECTOR]Use the terminal of the projector to execute RS-232C communication.
[DIGITAL INTERFACE BOX]Executes RS-232C communication via the optional Digital Interface Box (Model No.: ET-YFB100G) and the terminal.
5) Press as to select [BAUDRATE].
6) Press qw to switch the item.
fThe items will switch each time you press the button.
[9600]
Select the proper speed.[19200]
[38400]
7) Press as to select [PARITY].
8) Press qw to switch the item....](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-90.png "Page 91
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 91
[PROJECTOR]Use the terminal of the projector to execute RS-232C communication.
[DIGITAL INTERFACE BOX]Executes RS-232C communication via the optional Digital Interface Box (Model No.: ET-YFB100G) and the terminal.
5) Press as to select [BAUDRATE].
6) Press qw to switch the item.
fThe items will switch each time you press the button.
[9600]
Select the proper speed.[19200]
[38400]
7) Press as to select [PARITY].
8) Press qw to switch the item....")
Chapter 4 Settings — [PROJECTOR SETUP] menu ENGLISH - 91 [PROJECTOR]Use the terminal of the projector to execute RS-232C communication. [DIGITAL INTERFACE BOX]Executes RS-232C communication via the optional Digital Interface Box (Model No.: ET-YFB100G) and the terminal. 5) Press as to select [BAUDRATE]. 6) Press qw to switch the item. fThe items will switch each time you press the button. [9600] Select the proper speed.[19200] [38400] 7) Press as to select [PARITY]. 8) Press qw to switch the item....
Page 92
![Page 92
Chapter 4 Settings — [PROJECTOR SETUP] menu
92 - ENGLISH
Note
(Only for PT-EZ580, PT-EW640 and PT-EX610)
fWhen [INPUT SELECT] is set to [DIGITAL INTERFACE BOX], communication using that serial terminal is available only when the corresponding device (such as the optional Digital Interface Box (Model No.: ET-YFB100G)) is connected to the terminal. fWhen transferring logos via the optional Digital Interface Box (Model No.: ET-YFB100G), “NO SIGNAL SLEEP” of ET-YFB100G must be set to “OFF” to avoid cutting...](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-91.png "Page 92
Chapter 4 Settings — [PROJECTOR SETUP] menu
92 - ENGLISH
Note
(Only for PT-EZ580, PT-EW640 and PT-EX610)
fWhen [INPUT SELECT] is set to [DIGITAL INTERFACE BOX], communication using that serial terminal is available only when the corresponding device (such as the optional Digital Interface Box (Model No.: ET-YFB100G)) is connected to the terminal. fWhen transferring logos via the optional Digital Interface Box (Model No.: ET-YFB100G), “NO SIGNAL SLEEP” of ET-YFB100G must be set to “OFF” to avoid cutting...")
Chapter 4 Settings — [PROJECTOR SETUP] menu 92 - ENGLISH Note (Only for PT-EZ580, PT-EW640 and PT-EX610) fWhen [INPUT SELECT] is set to [DIGITAL INTERFACE BOX], communication using that serial terminal is available only when the corresponding device (such as the optional Digital Interface Box (Model No.: ET-YFB100G)) is connected to the terminal. fWhen transferring logos via the optional Digital Interface Box (Model No.: ET-YFB100G), “NO SIGNAL SLEEP” of ET-YFB100G must be set to “OFF” to avoid cutting...
Page 93
![Page 93
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 93
Adjusting the left to right audio balance
1) Press as to select [AUDIO SETTING].
2) Press the button.
fThe [AUDIO SETTING] screen is displayed.
3) Press as to select [BALANCE].
4) Press qw to adjust the level.
OperationAdjustmentRange of adjustment
Press w.Increases the volume on the right.L16 - R16Press q.Increases the volume on the left.
Setting audio output of the built-in speaker
1) Press as to select [AUDIO SETTING].
2) Press the button....](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-92.png "Page 93
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 93
Adjusting the left to right audio balance
1) Press as to select [AUDIO SETTING].
2) Press the button.
fThe [AUDIO SETTING] screen is displayed.
3) Press as to select [BALANCE].
4) Press qw to adjust the level.
OperationAdjustmentRange of adjustment
Press w.Increases the volume on the right.L16 - R16Press q.Increases the volume on the left.
Setting audio output of the built-in speaker
1) Press as to select [AUDIO SETTING].
2) Press the button....")
Chapter 4 Settings — [PROJECTOR SETUP] menu ENGLISH - 93 Adjusting the left to right audio balance 1) Press as to select [AUDIO SETTING]. 2) Press the button. fThe [AUDIO SETTING] screen is displayed. 3) Press as to select [BALANCE]. 4) Press qw to adjust the level. OperationAdjustmentRange of adjustment Press w.Increases the volume on the right.L16 - R16Press q.Increases the volume on the left. Setting audio output of the built-in speaker 1) Press as to select [AUDIO SETTING]. 2) Press the button....
Page 94
![Page 94
Chapter 4 Settings — [PROJECTOR SETUP] menu
94 - ENGLISH
[OFF]Audio is not output.
[ON]Audio is output.
Setting audio input from a connected device
1) Press as to select [AUDIO SETTING].
2) Press the button.
fThe [AUDIO SETTING] screen is displayed.
3) Press as to select the audio input.
4) Press qw to switch the item.
fThe items will switch each time you press the button.
[AUDIO IN 1]Audio connected to the terminal is output at projection of images from a preset input terminal.
[AUDIO IN 2]Audio...](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-93.png "Page 94
Chapter 4 Settings — [PROJECTOR SETUP] menu
94 - ENGLISH
[OFF]Audio is not output.
[ON]Audio is output.
Setting audio input from a connected device
1) Press as to select [AUDIO SETTING].
2) Press the button.
fThe [AUDIO SETTING] screen is displayed.
3) Press as to select the audio input.
4) Press qw to switch the item.
fThe items will switch each time you press the button.
[AUDIO IN 1]Audio connected to the terminal is output at projection of images from a preset input terminal.
[AUDIO IN 2]Audio...")
Chapter 4 Settings — [PROJECTOR SETUP] menu 94 - ENGLISH [OFF]Audio is not output. [ON]Audio is output. Setting audio input from a connected device 1) Press as to select [AUDIO SETTING]. 2) Press the button. fThe [AUDIO SETTING] screen is displayed. 3) Press as to select the audio input. 4) Press qw to switch the item. fThe items will switch each time you press the button. [AUDIO IN 1]Audio connected to the terminal is output at projection of images from a preset input terminal. [AUDIO IN 2]Audio...
Page 95
![Page 95
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 95
[NUMBER OF REGISTERED SIGNAL]Displays the number of registered signals.
[REMOTE2 STATUS]Displays the control status of the REMOTE2.
[SIGNAL INFORMATION]
[MEMORY NO.]Displays the memory number of the input signal.
[INPUT]Displays the input terminal currently selected.
[SIGNAL NAME]Displays the input signal name.
[SIGNAL FREQUENCY]Displays the frequency of the input signal.
[SYNC.STATE]Displays the synch polarity of the input signal.
[V.SYNC...](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-94.png "Page 95
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 95
[NUMBER OF REGISTERED SIGNAL]Displays the number of registered signals.
[REMOTE2 STATUS]Displays the control status of the REMOTE2.
[SIGNAL INFORMATION]
[MEMORY NO.]Displays the memory number of the input signal.
[INPUT]Displays the input terminal currently selected.
[SIGNAL NAME]Displays the input signal name.
[SIGNAL FREQUENCY]Displays the frequency of the input signal.
[SYNC.STATE]Displays the synch polarity of the input signal.
[V.SYNC...")
Chapter 4 Settings — [PROJECTOR SETUP] menu ENGLISH - 95 [NUMBER OF REGISTERED SIGNAL]Displays the number of registered signals. [REMOTE2 STATUS]Displays the control status of the REMOTE2. [SIGNAL INFORMATION] [MEMORY NO.]Displays the memory number of the input signal. [INPUT]Displays the input terminal currently selected. [SIGNAL NAME]Displays the input signal name. [SIGNAL FREQUENCY]Displays the frequency of the input signal. [SYNC.STATE]Displays the synch polarity of the input signal. [V.SYNC...
Page 96
![Page 96
Chapter 4 Settings — [PROJECTOR SETUP] menu
96 - ENGLISH
2) Press the button.
fThe [DATE AND TIME] screen is displayed.
3) Press as to select [ADJUST CLOCK].
4) Press the button.
fThe [ADJUST CLOCK] screen is displayed.
5) Press as to select [NTP SYNCHRONIZATION], and press qw to change the setting to [ON].
6) Press as to select [APPLY], and press the button.
fThe setting of the date and time will be completed.
Note
fTo set the date and time automatically, the projector must be connected to the...](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-95.png "Page 96
Chapter 4 Settings — [PROJECTOR SETUP] menu
96 - ENGLISH
2) Press the button.
fThe [DATE AND TIME] screen is displayed.
3) Press as to select [ADJUST CLOCK].
4) Press the button.
fThe [ADJUST CLOCK] screen is displayed.
5) Press as to select [NTP SYNCHRONIZATION], and press qw to change the setting to [ON].
6) Press as to select [APPLY], and press the button.
fThe setting of the date and time will be completed.
Note
fTo set the date and time automatically, the projector must be connected to the...")
Chapter 4 Settings — [PROJECTOR SETUP] menu 96 - ENGLISH 2) Press the button. fThe [DATE AND TIME] screen is displayed. 3) Press as to select [ADJUST CLOCK]. 4) Press the button. fThe [ADJUST CLOCK] screen is displayed. 5) Press as to select [NTP SYNCHRONIZATION], and press qw to change the setting to [ON]. 6) Press as to select [APPLY], and press the button. fThe setting of the date and time will be completed. Note fTo set the date and time automatically, the projector must be connected to the...
Page 97
![Page 97
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 97
[REGISTERED SIGNAL]Deletes all the setting values saved for each input signal.To delete only a part of a registered signal, perform the procedure descr\
ibed in “Deleting the registered signal” (x page 102).
[NETWORK/E-MAIL]Returns [NETWORK SETUP] and [E-mail set up] to factory default settings.
[LOGO IMAGE]Deletes the image registered in [USER LOGO].
5) Press the button.
6) When the confirmation screen is displayed, press qw to select [OK], and...](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-96.png "Page 97
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 97
[REGISTERED SIGNAL]Deletes all the setting values saved for each input signal.To delete only a part of a registered signal, perform the procedure descr\
ibed in “Deleting the registered signal” (x page 102).
[NETWORK/E-MAIL]Returns [NETWORK SETUP] and [E-mail set up] to factory default settings.
[LOGO IMAGE]Deletes the image registered in [USER LOGO].
5) Press the button.
6) When the confirmation screen is displayed, press qw to select [OK], and...")
Chapter 4 Settings — [PROJECTOR SETUP] menu ENGLISH - 97 [REGISTERED SIGNAL]Deletes all the setting values saved for each input signal.To delete only a part of a registered signal, perform the procedure descr\ ibed in “Deleting the registered signal” (x page 102). [NETWORK/E-MAIL]Returns [NETWORK SETUP] and [E-mail set up] to factory default settings. [LOGO IMAGE]Deletes the image registered in [USER LOGO]. 5) Press the button. 6) When the confirmation screen is displayed, press qw to select [OK], and...
Page 98
![Page 98
Chapter 4 Settings — [P IN P] menu
98 - ENGLISH
[P IN P] menu
On the menu screen, select [P IN P] from the main menu, and select an item from the sub-menu.Refer to “Navigating through the menu” (x page 57) for the operation of the menu screen. fAfter selecting the item, press asqw to set.
Using P IN P function
Locate a separate, small sub screen in the main screen to project two im\
ages simultaneously.
1) Press as to select [P IN P MODE].
2) Press the button.
fThe [P IN P MODE] screen is displayed.
3)...](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-97.png "Page 98
Chapter 4 Settings — [P IN P] menu
98 - ENGLISH
[P IN P] menu
On the menu screen, select [P IN P] from the main menu, and select an item from the sub-menu.Refer to “Navigating through the menu” (x page 57) for the operation of the menu screen. fAfter selecting the item, press asqw to set.
Using P IN P function
Locate a separate, small sub screen in the main screen to project two im\
ages simultaneously.
1) Press as to select [P IN P MODE].
2) Press the button.
fThe [P IN P MODE] screen is displayed.
3)...")
Chapter 4 Settings — [P IN P] menu 98 - ENGLISH [P IN P] menu On the menu screen, select [P IN P] from the main menu, and select an item from the sub-menu.Refer to “Navigating through the menu” (x page 57) for the operation of the menu screen. fAfter selecting the item, press asqw to set. Using P IN P function Locate a separate, small sub screen in the main screen to project two im\ ages simultaneously. 1) Press as to select [P IN P MODE]. 2) Press the button. fThe [P IN P MODE] screen is displayed. 3)...
Page 99
![Page 99
Chapter 4 Settings — [P IN P] menu
ENGLISH - 99
14) If [CLOCK PHASE] is selected in Step 8), press qw to make adjustment.
15) Press as to select [FRAME LOCK].
16) Press qw to switch the item.
[MAIN WINDOW]Set frame lock to the input signal set in the main window.
[SUB WINDOW]Set frame lock to the input signal set in the sub window.
17) Press as to select [TYPE].
18) Press qw to switch the item.
[MAIN WINDOW]The main window has display priority.
[SUB WINDOW]The sub window has display priority.
Note
fThe...](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-98.png "Page 99
Chapter 4 Settings — [P IN P] menu
ENGLISH - 99
14) If [CLOCK PHASE] is selected in Step 8), press qw to make adjustment.
15) Press as to select [FRAME LOCK].
16) Press qw to switch the item.
[MAIN WINDOW]Set frame lock to the input signal set in the main window.
[SUB WINDOW]Set frame lock to the input signal set in the sub window.
17) Press as to select [TYPE].
18) Press qw to switch the item.
[MAIN WINDOW]The main window has display priority.
[SUB WINDOW]The sub window has display priority.
Note
fThe...")
Chapter 4 Settings — [P IN P] menu ENGLISH - 99 14) If [CLOCK PHASE] is selected in Step 8), press qw to make adjustment. 15) Press as to select [FRAME LOCK]. 16) Press qw to switch the item. [MAIN WINDOW]Set frame lock to the input signal set in the main window. [SUB WINDOW]Set frame lock to the input signal set in the sub window. 17) Press as to select [TYPE]. 18) Press qw to switch the item. [MAIN WINDOW]The main window has display priority. [SUB WINDOW]The sub window has display priority. Note fThe...
Page 100
![Page 100
Chapter 4 Settings — [TEST PATTERN] menu
100 - ENGLISH
[TEST PATTERN] menu
On the menu screen, select [TEST PATTERN] from the main menu.Refer to “Navigating through the menu” (x page 57) for the operation of the menu screen. fPress qw to switch.
[TEST PATTERN]
Display the test pattern built-in to the projector.
Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before performing various adjustments.
1) Press qw to switch the [TEST...](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-99.png "Page 100
Chapter 4 Settings — [TEST PATTERN] menu
100 - ENGLISH
[TEST PATTERN] menu
On the menu screen, select [TEST PATTERN] from the main menu.Refer to “Navigating through the menu” (x page 57) for the operation of the menu screen. fPress qw to switch.
[TEST PATTERN]
Display the test pattern built-in to the projector.
Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before performing various adjustments.
1) Press qw to switch the [TEST...")
Chapter 4 Settings — [TEST PATTERN] menu 100 - ENGLISH [TEST PATTERN] menu On the menu screen, select [TEST PATTERN] from the main menu.Refer to “Navigating through the menu” (x page 57) for the operation of the menu screen. fPress qw to switch. [TEST PATTERN] Display the test pattern built-in to the projector. Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before performing various adjustments. 1) Press qw to switch the [TEST...