Panasonic Projector PT-EW640 User Manual
Here you can view all the pages of manual Panasonic Projector PT-EW640 User Manual. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 101
![Page 101
Chapter 4 Settings — [SIGNAL LIST] menu
ENGLISH - 101
[SIGNAL LIST] menu
On the menu screen, select [SIGNAL LIST] from the main menu.Refer to “Navigating through the menu” (x page 57) for the operation of the menu screen.
rRegistered signal details
A1 (1-2)
When the address number (A1, A2, ... L7, L8) signal is registered Sub memory number
Memory number:
fA name can be set for each sub memory (x page 103).
Registering new signals
After a new signal is input and the button on the remote control or the...](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-100.png "Page 101
Chapter 4 Settings — [SIGNAL LIST] menu
ENGLISH - 101
[SIGNAL LIST] menu
On the menu screen, select [SIGNAL LIST] from the main menu.Refer to “Navigating through the menu” (x page 57) for the operation of the menu screen.
rRegistered signal details
A1 (1-2)
When the address number (A1, A2, ... L7, L8) signal is registered Sub memory number
Memory number:
fA name can be set for each sub memory (x page 103).
Registering new signals
After a new signal is input and the button on the remote control or the...")
Chapter 4 Settings — [SIGNAL LIST] menu ENGLISH - 101 [SIGNAL LIST] menu On the menu screen, select [SIGNAL LIST] from the main menu.Refer to “Navigating through the menu” (x page 57) for the operation of the menu screen. rRegistered signal details A1 (1-2) When the address number (A1, A2, ... L7, L8) signal is registered Sub memory number Memory number: fA name can be set for each sub memory (x page 103). Registering new signals After a new signal is input and the button on the remote control or the...
Page 102
![Page 102
Chapter 4 Settings — [SIGNAL LIST] menu
102 - ENGLISH
3) Press the button.
fThe [REGISTERED SIGNAL SETUP] screen is displayed.
4) Press as to select [LOCK-IN RANGE].
5) Press qw to switch the item.
fThe items will switch each time you press the button.
[NARROW]Select in most cases.
[WIDE]Widens the lock-in range.
Note
fSwitch the range that determines that a signal to be input is the same signal that is already registered. fTo prioritize the determination that it is the same signal that is already...](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-101.png "Page 102
Chapter 4 Settings — [SIGNAL LIST] menu
102 - ENGLISH
3) Press the button.
fThe [REGISTERED SIGNAL SETUP] screen is displayed.
4) Press as to select [LOCK-IN RANGE].
5) Press qw to switch the item.
fThe items will switch each time you press the button.
[NARROW]Select in most cases.
[WIDE]Widens the lock-in range.
Note
fSwitch the range that determines that a signal to be input is the same signal that is already registered. fTo prioritize the determination that it is the same signal that is already...")
Chapter 4 Settings — [SIGNAL LIST] menu 102 - ENGLISH 3) Press the button. fThe [REGISTERED SIGNAL SETUP] screen is displayed. 4) Press as to select [LOCK-IN RANGE]. 5) Press qw to switch the item. fThe items will switch each time you press the button. [NARROW]Select in most cases. [WIDE]Widens the lock-in range. Note fSwitch the range that determines that a signal to be input is the same signal that is already registered. fTo prioritize the determination that it is the same signal that is already...
Page 103
![Page 103
Chapter 4 Settings — [SIGNAL LIST] menu
ENGLISH - 103
Sub memory
The projector has a sub memory function that can register the multiple i\
mage adjustment data, even if it is recognized as the same signal by the frequency or format of the synchronization signal source.
Use this function when you need to adjust the picture quality such as switching of the aspect ratio or white balance by the same synchronization signal source. The sub memory includes all the data that can be adjusted for each signa\
l,...](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-102.png "Page 103
Chapter 4 Settings — [SIGNAL LIST] menu
ENGLISH - 103
Sub memory
The projector has a sub memory function that can register the multiple i\
mage adjustment data, even if it is recognized as the same signal by the frequency or format of the synchronization signal source.
Use this function when you need to adjust the picture quality such as switching of the aspect ratio or white balance by the same synchronization signal source. The sub memory includes all the data that can be adjusted for each signa\
l,...")
Chapter 4 Settings — [SIGNAL LIST] menu ENGLISH - 103 Sub memory The projector has a sub memory function that can register the multiple i\ mage adjustment data, even if it is recognized as the same signal by the frequency or format of the synchronization signal source. Use this function when you need to adjust the picture quality such as switching of the aspect ratio or white balance by the same synchronization signal source. The sub memory includes all the data that can be adjusted for each signa\ l,...
Page 104
![Page 104
Chapter 4 Settings — [SECURITY] menu
104 - ENGLISH
[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an item from the sub-menu.Refer to “Navigating through the menu” (x page 57) for the operation of the menu screen. fWhen the projector is used for the first time
Initial password: Press awsqawsq in order, and press the button.
fAfter selecting the item, press asqw to set.
Attention
fWhen you select the [SECURITY] menu and press the button, entering a password is...](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-103.png "Page 104
Chapter 4 Settings — [SECURITY] menu
104 - ENGLISH
[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an item from the sub-menu.Refer to “Navigating through the menu” (x page 57) for the operation of the menu screen. fWhen the projector is used for the first time
Initial password: Press awsqawsq in order, and press the button.
fAfter selecting the item, press asqw to set.
Attention
fWhen you select the [SECURITY] menu and press the button, entering a password is...")
Chapter 4 Settings — [SECURITY] menu 104 - ENGLISH [SECURITY] menu On the menu screen, select [SECURITY] from the main menu, and select an item from the sub-menu.Refer to “Navigating through the menu” (x page 57) for the operation of the menu screen. fWhen the projector is used for the first time Initial password: Press awsqawsq in order, and press the button. fAfter selecting the item, press asqw to set. Attention fWhen you select the [SECURITY] menu and press the button, entering a password is...
Page 105
![Page 105
Chapter 4 Settings — [SECURITY] menu
ENGLISH - 105
6) Press the button.
Note
fThe entered password is displayed with*marks on the screen. fIf numbers have been used for the security password, the security password will need to be initialized again if the remote control is lost. Consult your dealer for the initialization method.
[DISPLAY SETTING]
Overlap the security message (text or image) over the projecting image.
1) Press as to select [DISPLAY SETTING].
2) Press qw to switch the item.
fThe items...](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-104.png "Page 105
Chapter 4 Settings — [SECURITY] menu
ENGLISH - 105
6) Press the button.
Note
fThe entered password is displayed with*marks on the screen. fIf numbers have been used for the security password, the security password will need to be initialized again if the remote control is lost. Consult your dealer for the initialization method.
[DISPLAY SETTING]
Overlap the security message (text or image) over the projecting image.
1) Press as to select [DISPLAY SETTING].
2) Press qw to switch the item.
fThe items...")
Chapter 4 Settings — [SECURITY] menu ENGLISH - 105 6) Press the button. Note fThe entered password is displayed with*marks on the screen. fIf numbers have been used for the security password, the security password will need to be initialized again if the remote control is lost. Consult your dealer for the initialization method. [DISPLAY SETTING] Overlap the security message (text or image) over the projecting image. 1) Press as to select [DISPLAY SETTING]. 2) Press qw to switch the item. fThe items...
Page 106
![Page 106
Chapter 4 Settings — [SECURITY] menu
106 - ENGLISH
Attention
fThe initial password is “AAAA” by the factory default or when [ALL USER DATA] in [INITIALIZE] (x page 96) is executed.
fChange the password periodically that is hard to guess.
[CONTROL DEVICE SETUP]
Enable/disable the button operations on the control panel and the remote control.
1) Press as to select [CONTROL DEVICE SETUP].
2) Press the button.
fThe [CONTROL DEVICE SETUP] screen is displayed.
3) Press as to select [CONTROL PANEL] or...](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-105.png "Page 106
Chapter 4 Settings — [SECURITY] menu
106 - ENGLISH
Attention
fThe initial password is “AAAA” by the factory default or when [ALL USER DATA] in [INITIALIZE] (x page 96) is executed.
fChange the password periodically that is hard to guess.
[CONTROL DEVICE SETUP]
Enable/disable the button operations on the control panel and the remote control.
1) Press as to select [CONTROL DEVICE SETUP].
2) Press the button.
fThe [CONTROL DEVICE SETUP] screen is displayed.
3) Press as to select [CONTROL PANEL] or...")
Chapter 4 Settings — [SECURITY] menu 106 - ENGLISH Attention fThe initial password is “AAAA” by the factory default or when [ALL USER DATA] in [INITIALIZE] (x page 96) is executed. fChange the password periodically that is hard to guess. [CONTROL DEVICE SETUP] Enable/disable the button operations on the control panel and the remote control. 1) Press as to select [CONTROL DEVICE SETUP]. 2) Press the button. fThe [CONTROL DEVICE SETUP] screen is displayed. 3) Press as to select [CONTROL PANEL] or...
Page 107
![Page 107
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 107
[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an item from the sub-menu.Refer to “Navigating through the menu” (x page 57) for the operation of the menu screen. fAfter selecting the item, press asqw to set.
[DIGITAL LINK MODE]
(Only for PT-EZ580, PT-EW640 and PT -EX610)
Switch the communication method of the terminal of the projector.
1) Press as to select [DIGITAL LINK MODE].
2) Press qw to switch the item.
fThe...](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-106.png "Page 107
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 107
[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an item from the sub-menu.Refer to “Navigating through the menu” (x page 57) for the operation of the menu screen. fAfter selecting the item, press asqw to set.
[DIGITAL LINK MODE]
(Only for PT-EZ580, PT-EW640 and PT -EX610)
Switch the communication method of the terminal of the projector.
1) Press as to select [DIGITAL LINK MODE].
2) Press qw to switch the item.
fThe...")
Chapter 4 Settings — [NETWORK] menu ENGLISH - 107 [NETWORK] menu On the menu screen, select [NETWORK] from the main menu, and select an item from the sub-menu.Refer to “Navigating through the menu” (x page 57) for the operation of the menu screen. fAfter selecting the item, press asqw to set. [DIGITAL LINK MODE] (Only for PT-EZ580, PT-EW640 and PT -EX610) Switch the communication method of the terminal of the projector. 1) Press as to select [DIGITAL LINK MODE]. 2) Press qw to switch the item. fThe...
Page 108
![Page 108
Chapter 4 Settings — [NETWORK] menu
108 - ENGLISH
6) Press the button.
7) When the confirmation screen is displayed, press qw to select [OK], and press the button.
Note
fThe projector does not support 10BaseT Full/Half.
When the projector is connected to a twisted-pair-cable transmitter
1) Press as to select [DIGITAL LINK SETUP].
2) Press the button.
fThe [DIGITAL LINK SETUP] screen is displayed.
3) Press as to select [DUPLEX(DIGITAL LINK)].
4) Press qw to switch the communication method.
fThe...](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-107.png "Page 108
Chapter 4 Settings — [NETWORK] menu
108 - ENGLISH
6) Press the button.
7) When the confirmation screen is displayed, press qw to select [OK], and press the button.
Note
fThe projector does not support 10BaseT Full/Half.
When the projector is connected to a twisted-pair-cable transmitter
1) Press as to select [DIGITAL LINK SETUP].
2) Press the button.
fThe [DIGITAL LINK SETUP] screen is displayed.
3) Press as to select [DUPLEX(DIGITAL LINK)].
4) Press qw to switch the communication method.
fThe...")
Chapter 4 Settings — [NETWORK] menu 108 - ENGLISH 6) Press the button. 7) When the confirmation screen is displayed, press qw to select [OK], and press the button. Note fThe projector does not support 10BaseT Full/Half. When the projector is connected to a twisted-pair-cable transmitter 1) Press as to select [DIGITAL LINK SETUP]. 2) Press the button. fThe [DIGITAL LINK SETUP] screen is displayed. 3) Press as to select [DUPLEX(DIGITAL LINK)]. 4) Press qw to switch the communication method. fThe...
Page 109
![Page 109
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 109
[SUBNET MASK]Enter the subnet mask when not using a DHCP server.
[DEFAULT GATEWAY]Enter the default gateway address when not using a DHCP server.
[STORE]Save the current network settings.
4) Press as to select [STORE], and press the button.
5) When the confirmation screen is displayed, press qw to select [OK], and press the button.
Note
fWhen using a DHCP server, confirm that the DHCP server is running. fConsult your network administrator regarding the...](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-108.png "Page 109
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 109
[SUBNET MASK]Enter the subnet mask when not using a DHCP server.
[DEFAULT GATEWAY]Enter the default gateway address when not using a DHCP server.
[STORE]Save the current network settings.
4) Press as to select [STORE], and press the button.
5) When the confirmation screen is displayed, press qw to select [OK], and press the button.
Note
fWhen using a DHCP server, confirm that the DHCP server is running. fConsult your network administrator regarding the...")
Chapter 4 Settings — [NETWORK] menu ENGLISH - 109 [SUBNET MASK]Enter the subnet mask when not using a DHCP server. [DEFAULT GATEWAY]Enter the default gateway address when not using a DHCP server. [STORE]Save the current network settings. 4) Press as to select [STORE], and press the button. 5) When the confirmation screen is displayed, press qw to select [OK], and press the button. Note fWhen using a DHCP server, confirm that the DHCP server is running. fConsult your network administrator regarding the...
Page 110
![Page 110
Chapter 4 Settings — [NETWORK] menu
110 - ENGLISH
Network connections
The projector has a network function, and the following operations are a\
vailable from the computer using the web control.
fSetting and adjustment of the projector
fDisplay of the projector status
fSending of E-mail messages when there is a problem with the projector
The projector supports “Crestron ConnectedTM”, and the following application software of Crestron Electronics, Inc. can be used.
fRoomView Express
fFusion RV...](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-109.png "Page 110
Chapter 4 Settings — [NETWORK] menu
110 - ENGLISH
Network connections
The projector has a network function, and the following operations are a\
vailable from the computer using the web control.
fSetting and adjustment of the projector
fDisplay of the projector status
fSending of E-mail messages when there is a problem with the projector
The projector supports “Crestron ConnectedTM”, and the following application software of Crestron Electronics, Inc. can be used.
fRoomView Express
fFusion RV...")
Chapter 4 Settings — [NETWORK] menu 110 - ENGLISH Network connections The projector has a network function, and the following operations are a\ vailable from the computer using the web control. fSetting and adjustment of the projector fDisplay of the projector status fSending of E-mail messages when there is a problem with the projector The projector supports “Crestron ConnectedTM”, and the following application software of Crestron Electronics, Inc. can be used. fRoomView Express fFusion RV...