Panasonic Projector PT-EW640 User Manual

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 111
 fFor the LAN cable between a twisted-pair-cable transmitter and the projector, use a cable that meets the following criteria:
 gCompatible with CAT5e or higher
 gShielded type (including connectors)
 gStraight-through
 gSingle wire
 fThe maximum transmission distance between the twisted-pair-cable transmitter and the projector is 100 m (328'1"). If this distance is exceeded, image and sound may be disrupted and may cause a malfunction in LAN...

Chapter 4 Settings — [NETWORK] menu
112 - ENGLISH
 fDo not perform setting or control simultaneously by starting up multiple web browsers. Do not set or control the projector from multiple computers. fChange the password first. (x page 121) fThe administrator rights allow use of all functions. The user rights allow use of only the following functions: [Projector status] (x page 112), viewing of the error information page (x page 113), [Network status] (x page 114), [Access error] (x page 114), [Mail...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 113
13 [AROUND LAMP TEMPERATURE]Displays the status of the temperature around the lamp of the projector.
14 [LAMP RUNTIME]Displays the runtime of the lamps (converted value).
15 [SELF TEST]Displays the self-diagnosis information.
16 [PROJECTOR RUNTIME]Displays the runtime of the projector.
Error information page
When [Error (Detail)] or [Warning (Detail)] is displayed in the self-diagnosis display of the [Projector status] screen, click it to display the...

Chapter 4 Settings — [NETWORK] menu
114 - ENGLISH
[Network status] page
Click [Status] → [Network status].
The current network setting status is displayed.
[Access error] page
Click [Status] → [Access error].
The error log on the web server is displayed such as access to the pages that do not exist or access with unauthorized user names or passwords.
[Mail error] page
Click [Status] → [Mail error].
Display E-mail error information if failed to send periodic E-mails.
Note
 f[Access error] and [Mail error]...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 115
[Basic control] page
Click [Projector control] → [Basic control].
1
2
4
5
3
6
1 [INPUT] *1
Switches the input signal.
2 [VOLUME]Adjusts the volume.
3 [PICTURE MODE]Switches the picture mode.
4 [SHUTTER] *2
Switches the setting whether to use the shutter function (closing/opening of the shutter).
5 [POWER]Turns on/off the power.
6 [CLOSED CAPTION]Switches the closed caption setting.
*1 [DisplayPort] and [DIGITAL LINK] are only for PT-EZ580, PT-EW640 and...

Chapter 4 Settings — [NETWORK] menu
116 - ENGLISH
[Network config] page
Click [Detailed set up] → [Network config].
 fClick [Network config] to display the [CAUTION!] screen.
 fClick the [Next] button to display the current settings.
 fClick the [Change] button to display the setting change screen.
1
2
3
4
5
6
7
8
1 [PROJECTOR NAME]Enter the name of the projector. Enter the host name if it is required when using a DHCP server etc.
2 [DHCP ON], [DHCP OFF]To enable the DHCP client function, set to [DHCP...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 117
[Adjust clock] page
Click [Detailed set up] → [Adjust clock].
1
2
3
4
5
6
7
1 [Timezone]Selects the time zone.
2 [Set time zone]Updates the time zone setting.
3 [NTP SYNCHRONIZATION]Sets to [ON] to adjust the date and time automatically.
4 [NTP SERVER NAME]Enter the IP address or server name of the NTP server when you set to adjust the date and time manually.(To enter the server name, the DNS server needs to be set up.)
5 [Date]Enter the date to be...

Chapter 4 Settings — [NETWORK] menu
118 - ENGLISH
[E-mail set up] page
When there is a problem or the runtime of a lamp reaches a set value, an\
 E-mail can be sent to preset E-mail addresses (up to two addresses).
Click [Detailed set up] → [E-mail set up].
1
2
3
4
5
6
1 [ENABLE]Select [Enable] to use the E-mail function.
2 [SMTP SERVER NAME]Enter the IP address or the server name of the E-mail server (SMTP). To enter the server name, the DNS server needs to be set up.
3 [MAIL FROM]Enter the E-mail...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 119
[Authentication set up] page
Set the authentication items when POP authentication or SMTP authentication is necessary to send an E-mail.
Click [Detailed set up] → [Authentication set up].
1
2
3
4
5
6
78
1 [Auth]Selects the authentication method specified by your Internet service provider.
2 [SMTP Auth]Set when the SMTP authentication is selected.
3 [POP Server name]Enter the POP server name.
Allowed characters:Alphanumerics (A - Z, a - z, 0 - 9)Minus sign...

Chapter 4 Settings — [NETWORK] menu
120 - ENGLISH
Contents of E-mail sent
Example of E-mail sent when E-mail is set
The following E-mail is sent when the E-mail settings have been establis\
hed.
=== P anas onic  pr ojec t or  r epor t ( CO NF I G URE )  ===
P r ojec t or  Ty pe  :  E Z 580
S er ial No :  S N9250024
-----  E-mail set up dat a -----
T E M P E RAT URE  WA RNI NG  S E T UP
MINIMUM TIME  at  [  30]  m inut es  int er v al
I NTA K E  A I R T E M P E RAT URE   O v er  [  36 degC /   96 degF  ]...