Panasonic Projector PT-EW640 User Manual
Here you can view all the pages of manual Panasonic Projector PT-EW640 User Manual. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 81
![Page 81
Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 81
2) Press the button.
fThe [ON-SCREEN DISPLAY] screen is displayed.
3) Press as to select [INPUT GUIDE].
4) Press qw to switch the item.
fThe items will switch each time you press the button.
[ON]Displays the input guide.
[OFF]Hides the input guide.
Setting [WARNING MESSAGE]
Set the display/hide of the warning message.
1) Press as to select [ON-SCREEN DISPLAY].
2) Press the button.
fThe [ON-SCREEN DISPLAY] screen is displayed.
3) Press as to...](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-80.png "Page 81
Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 81
2) Press the button.
fThe [ON-SCREEN DISPLAY] screen is displayed.
3) Press as to select [INPUT GUIDE].
4) Press qw to switch the item.
fThe items will switch each time you press the button.
[ON]Displays the input guide.
[OFF]Hides the input guide.
Setting [WARNING MESSAGE]
Set the display/hide of the warning message.
1) Press as to select [ON-SCREEN DISPLAY].
2) Press the button.
fThe [ON-SCREEN DISPLAY] screen is displayed.
3) Press as to...")
Chapter 4 Settings — [DISPLAY OPTION] menu ENGLISH - 81 2) Press the button. fThe [ON-SCREEN DISPLAY] screen is displayed. 3) Press as to select [INPUT GUIDE]. 4) Press qw to switch the item. fThe items will switch each time you press the button. [ON]Displays the input guide. [OFF]Hides the input guide. Setting [WARNING MESSAGE] Set the display/hide of the warning message. 1) Press as to select [ON-SCREEN DISPLAY]. 2) Press the button. fThe [ON-SCREEN DISPLAY] screen is displayed. 3) Press as to...
Page 82
![Page 82
Chapter 4 Settings — [DISPLAY OPTION] menu
82 - ENGLISH
Note
fClosed caption is a function that displays text information of video signals mainly used in North America. Captions may not be displayed depending on the connected devices or contents being played back. f[CLOSED CAPTION SETTING] can be selected only if NTSC or 480i YCBCR signal is input. fIf [CLOSED CAPTION] is set to [ON], brightness of images may change depending on the external devices compatible with closed caption function to be...](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-81.png "Page 82
Chapter 4 Settings — [DISPLAY OPTION] menu
82 - ENGLISH
Note
fClosed caption is a function that displays text information of video signals mainly used in North America. Captions may not be displayed depending on the connected devices or contents being played back. f[CLOSED CAPTION SETTING] can be selected only if NTSC or 480i YCBCR signal is input. fIf [CLOSED CAPTION] is set to [ON], brightness of images may change depending on the external devices compatible with closed caption function to be...")
Chapter 4 Settings — [DISPLAY OPTION] menu 82 - ENGLISH Note fClosed caption is a function that displays text information of video signals mainly used in North America. Captions may not be displayed depending on the connected devices or contents being played back. f[CLOSED CAPTION SETTING] can be selected only if NTSC or 480i YCBCR signal is input. fIf [CLOSED CAPTION] is set to [ON], brightness of images may change depending on the external devices compatible with closed caption function to be...
Page 83
![Page 83
Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 83
2) Press the button.
fThe [SHUTTER SETTING] screen is displayed.
3) Press as to select [SHUT-OFF].
4) Press qw to switch the item.
[KEEP CURRENT STATE]When the projector is switched off, the projector turns into standby with the shutter status as is.
[OPEN]When the projector is switched off, the projector turns into standby with the shutter left opened.
[CLOSE]When the projector is switched off, the projector turns into standby with the shutter...](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-82.png "Page 83
Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 83
2) Press the button.
fThe [SHUTTER SETTING] screen is displayed.
3) Press as to select [SHUT-OFF].
4) Press qw to switch the item.
[KEEP CURRENT STATE]When the projector is switched off, the projector turns into standby with the shutter status as is.
[OPEN]When the projector is switched off, the projector turns into standby with the shutter left opened.
[CLOSE]When the projector is switched off, the projector turns into standby with the shutter...")
Chapter 4 Settings — [DISPLAY OPTION] menu ENGLISH - 83 2) Press the button. fThe [SHUTTER SETTING] screen is displayed. 3) Press as to select [SHUT-OFF]. 4) Press qw to switch the item. [KEEP CURRENT STATE]When the projector is switched off, the projector turns into standby with the shutter status as is. [OPEN]When the projector is switched off, the projector turns into standby with the shutter left opened. [CLOSE]When the projector is switched off, the projector turns into standby with the shutter...
Page 84
![Page 84
Chapter 4 Settings — [DISPLAY OPTION] menu
84 - ENGLISH
4) Press the button three times to clear.
fThe start time is displayed at the bottom right of the projected image.
Note
fPresentation timer operations are also possible by the button on the remote control. (x page 53) fThe security message set in the [SECURITY] menu → [DISPLAY SETTING] (x page 105) is not displayed when the elapsed time or remaining time is displayed. fThe elapsed time or remaining time are not displayed when the menu scree\
n...](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-83.png "Page 84
Chapter 4 Settings — [DISPLAY OPTION] menu
84 - ENGLISH
4) Press the button three times to clear.
fThe start time is displayed at the bottom right of the projected image.
Note
fPresentation timer operations are also possible by the button on the remote control. (x page 53) fThe security message set in the [SECURITY] menu → [DISPLAY SETTING] (x page 105) is not displayed when the elapsed time or remaining time is displayed. fThe elapsed time or remaining time are not displayed when the menu scree\
n...")
Chapter 4 Settings — [DISPLAY OPTION] menu 84 - ENGLISH 4) Press the button three times to clear. fThe start time is displayed at the bottom right of the projected image. Note fPresentation timer operations are also possible by the button on the remote control. (x page 53) fThe security message set in the [SECURITY] menu → [DISPLAY SETTING] (x page 105) is not displayed when the elapsed time or remaining time is displayed. fThe elapsed time or remaining time are not displayed when the menu scree\ n...
Page 85
![Page 85
Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 85
Note
fThe magnification can be adjusted in increments of 0.1 between 1.0x and 2.0x. For some computer signals, the magnification can be adjusted up to 3.0x. fThe digital zoom function is canceled if the button is pressed during a digital zoom. fThe digital zoom function is canceled if the input signal changes during\
a digital zoom. fDuring a digital zoom, the freeze function is disabled.](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-84.png "Page 85
Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 85
Note
fThe magnification can be adjusted in increments of 0.1 between 1.0x and 2.0x. For some computer signals, the magnification can be adjusted up to 3.0x. fThe digital zoom function is canceled if the button is pressed during a digital zoom. fThe digital zoom function is canceled if the input signal changes during\
a digital zoom. fDuring a digital zoom, the freeze function is disabled.")
Chapter 4 Settings — [DISPLAY OPTION] menu ENGLISH - 85 Note fThe magnification can be adjusted in increments of 0.1 between 1.0x and 2.0x. For some computer signals, the magnification can be adjusted up to 3.0x. fThe digital zoom function is canceled if the button is pressed during a digital zoom. fThe digital zoom function is canceled if the input signal changes during\ a digital zoom. fDuring a digital zoom, the freeze function is disabled.
Page 86
![Page 86
Chapter 4 Settings — [PROJECTOR SETUP] menu
86 - ENGLISH
[PROJECTOR SETUP] menu
On the menu screen, select [PROJECTOR SETUP] from the main menu, and select an item from the sub-menu.Refer to “Navigating through the menu” (x page 57) for the operation of the menu screen. fAfter selecting the item, press asqw to set.
[PROJECTOR ID]
The projector has an ID number setting function that can be used when multiple projectors are used side by side to enable simultaneous control or individual control via a single...](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-85.png "Page 86
Chapter 4 Settings — [PROJECTOR SETUP] menu
86 - ENGLISH
[PROJECTOR SETUP] menu
On the menu screen, select [PROJECTOR SETUP] from the main menu, and select an item from the sub-menu.Refer to “Navigating through the menu” (x page 57) for the operation of the menu screen. fAfter selecting the item, press asqw to set.
[PROJECTOR ID]
The projector has an ID number setting function that can be used when multiple projectors are used side by side to enable simultaneous control or individual control via a single...")
Chapter 4 Settings — [PROJECTOR SETUP] menu 86 - ENGLISH [PROJECTOR SETUP] menu On the menu screen, select [PROJECTOR SETUP] from the main menu, and select an item from the sub-menu.Refer to “Navigating through the menu” (x page 57) for the operation of the menu screen. fAfter selecting the item, press asqw to set. [PROJECTOR ID] The projector has an ID number setting function that can be used when multiple projectors are used side by side to enable simultaneous control or individual control via a single...
Page 87
![Page 87
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 87
[ECO MANAGEMENT]
This function optimizes lamp power according to the operating status to \
reduce power consumption.
Setting [LAMP POWER]
Switch the brightness of the lamp according to the operating environment of the projector or the purpose.
1) Press as to select [ECO MANAGEMENT].
2) Press the button.
fThe [ECO MANAGEMENT] screen is displayed.
3) Press as to select [LAMP POWER].
4) Press qw to switch the item.
[AUTO]Power is automatically...](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-86.png "Page 87
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 87
[ECO MANAGEMENT]
This function optimizes lamp power according to the operating status to \
reduce power consumption.
Setting [LAMP POWER]
Switch the brightness of the lamp according to the operating environment of the projector or the purpose.
1) Press as to select [ECO MANAGEMENT].
2) Press the button.
fThe [ECO MANAGEMENT] screen is displayed.
3) Press as to select [LAMP POWER].
4) Press qw to switch the item.
[AUTO]Power is automatically...")
Chapter 4 Settings — [PROJECTOR SETUP] menu ENGLISH - 87 [ECO MANAGEMENT] This function optimizes lamp power according to the operating status to \ reduce power consumption. Setting [LAMP POWER] Switch the brightness of the lamp according to the operating environment of the projector or the purpose. 1) Press as to select [ECO MANAGEMENT]. 2) Press the button. fThe [ECO MANAGEMENT] screen is displayed. 3) Press as to select [LAMP POWER]. 4) Press qw to switch the item. [AUTO]Power is automatically...
Page 88
![Page 88
Chapter 4 Settings — [PROJECTOR SETUP] menu
88 - ENGLISH
Setting [NO SIGNAL SHUT-OFF]
A function that automatically switches the power of the projector to standby if there is no input signal for a certain period of time. The time before switching to standby can be set.
1) Press as to select [ECO MANAGEMENT].
2) Press the button.
fThe [ECO MANAGEMENT] screen is displayed.
3) Press as to select [NO SIGNAL SHUT-OFF].
4) Press qw to switch the item.
fThe items will switch each time you press the button....](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-87.png "Page 88
Chapter 4 Settings — [PROJECTOR SETUP] menu
88 - ENGLISH
Setting [NO SIGNAL SHUT-OFF]
A function that automatically switches the power of the projector to standby if there is no input signal for a certain period of time. The time before switching to standby can be set.
1) Press as to select [ECO MANAGEMENT].
2) Press the button.
fThe [ECO MANAGEMENT] screen is displayed.
3) Press as to select [NO SIGNAL SHUT-OFF].
4) Press qw to switch the item.
fThe items will switch each time you press the button....")
Chapter 4 Settings — [PROJECTOR SETUP] menu 88 - ENGLISH Setting [NO SIGNAL SHUT-OFF] A function that automatically switches the power of the projector to standby if there is no input signal for a certain period of time. The time before switching to standby can be set. 1) Press as to select [ECO MANAGEMENT]. 2) Press the button. fThe [ECO MANAGEMENT] screen is displayed. 3) Press as to select [NO SIGNAL SHUT-OFF]. 4) Press qw to switch the item. fThe items will switch each time you press the button....
Page 89
![Page 89
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 89
2) Press qw to select [ON], and press the button.
fThe [SCHEDULE] screen is displayed.
3) Select and assign program to each day of week.
fPress as to select the day of week, and press qw to select a program number.
fYou can set the program from No.1 to No.7. “- - -” indicates that the program number has not been set.
How to set a program
Set up to 16 commands to each program.
1) Press as to select [SCHEDULE].
2) Press qw to select [ON], and...](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-88.png "Page 89
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 89
2) Press qw to select [ON], and press the button.
fThe [SCHEDULE] screen is displayed.
3) Select and assign program to each day of week.
fPress as to select the day of week, and press qw to select a program number.
fYou can set the program from No.1 to No.7. “- - -” indicates that the program number has not been set.
How to set a program
Set up to 16 commands to each program.
1) Press as to select [SCHEDULE].
2) Press qw to select [ON], and...")
Chapter 4 Settings — [PROJECTOR SETUP] menu ENGLISH - 89 2) Press qw to select [ON], and press the button. fThe [SCHEDULE] screen is displayed. 3) Select and assign program to each day of week. fPress as to select the day of week, and press qw to select a program number. fYou can set the program from No.1 to No.7. “- - -” indicates that the program number has not been set. How to set a program Set up to 16 commands to each program. 1) Press as to select [SCHEDULE]. 2) Press qw to select [ON], and...
Page 90
![Page 90
Chapter 4 Settings — [PROJECTOR SETUP] menu
90 - ENGLISH
*3 When the Panasonic twisted-pair-cable transmitter (such as the optional Digital Interface Box (Model No.: ET-YFB100G)) is connected to the projector, its input name is reflected from [INPUT1] to [INPUT10] automatically. If an item where the input name is not reflected is selected, it is disabled.
11) Press the button.
fThe command is fixed and n is displayed at the left of the selected command.
fAfter the command is fixed, press the button...](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-89.png "Page 90
Chapter 4 Settings — [PROJECTOR SETUP] menu
90 - ENGLISH
*3 When the Panasonic twisted-pair-cable transmitter (such as the optional Digital Interface Box (Model No.: ET-YFB100G)) is connected to the projector, its input name is reflected from [INPUT1] to [INPUT10] automatically. If an item where the input name is not reflected is selected, it is disabled.
11) Press the button.
fThe command is fixed and n is displayed at the left of the selected command.
fAfter the command is fixed, press the button...")
Chapter 4 Settings — [PROJECTOR SETUP] menu 90 - ENGLISH *3 When the Panasonic twisted-pair-cable transmitter (such as the optional Digital Interface Box (Model No.: ET-YFB100G)) is connected to the projector, its input name is reflected from [INPUT1] to [INPUT10] automatically. If an item where the input name is not reflected is selected, it is disabled. 11) Press the button. fThe command is fixed and n is displayed at the left of the selected command. fAfter the command is fixed, press the button...