Panasonic Projector PT-EW640 User Manual
Here you can view all the pages of manual Panasonic Projector PT-EW640 User Manual. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
Chapter 2 Getting Started — Connecting
ENGLISH - 41
Note
fWhen entering DVI-D, some external devices to be connected may require switching the setting using the [DISPLAY OPTION] menu → [DVI-D IN] → [EDID]. fThe terminal can be connected to HDMI- or DVI-D-compliant devices. However, images may not appear or may not be displayed properly on some devices. fFor an HDMI cable, use an HDMI High Speed cable that conforms to HDMI standards. If a cable that does not conform to HDMI standards is used, images may...](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-40.png "Page 41
Chapter 2 Getting Started — Connecting
ENGLISH - 41
Note
fWhen entering DVI-D, some external devices to be connected may require switching the setting using the [DISPLAY OPTION] menu → [DVI-D IN] → [EDID]. fThe terminal can be connected to HDMI- or DVI-D-compliant devices. However, images may not appear or may not be displayed properly on some devices. fFor an HDMI cable, use an HDMI High Speed cable that conforms to HDMI standards. If a cable that does not conform to HDMI standards is used, images may...")
Chapter 2 Getting Started — Connecting ENGLISH - 41 Note fWhen entering DVI-D, some external devices to be connected may require switching the setting using the [DISPLAY OPTION] menu → [DVI-D IN] → [EDID]. fThe terminal can be connected to HDMI- or DVI-D-compliant devices. However, images may not appear or may not be displayed properly on some devices. fFor an HDMI cable, use an HDMI High Speed cable that conforms to HDMI standards. If a cable that does not conform to HDMI standards is used, images may...
Page 42
Chapter 2 Getting Started — Connecting 42 - ENGLISH Connecting example: Twisted-pair-cable transmitter (Only for PT-EZ580, PT-EW640 and PT -EX610) Twisted-pair-cable transmitters such as the optional Digital Interface Box (Model No.: ET -YFB100G) use twisted-pair-cables to transmit input images, audio, Ethernet, and serial control signals, and the projector can input those digital signals to the terminal. Blu-ray disc playerHDMI cable (commercially available) Control computer Projector connecting...
Page 43
ENGLISH - 43 Chapter 3 Basic Operations This chapter describes basic operations to start with.
Page 44
Chapter 3 Basic Operations — Switching on/off the projector 44 - ENGLISH Switching on/off the projector Connecting the power cord Make sure that the supplied power cord is securely fixed to the projector body to prevent it from being removed easily. Confirm that the switch is on the side before connecting the power cord. For details of power cord handling, refer to “Read this first!” (x page 2). Attaching the power cord 1) Check the shapes of the terminal on the rear of the projector body and the...
Page 45
Chapter 3 Basic Operations — Switching on/off the projector ENGLISH - 45 Note fWhile the power indicator is lit in orange, the fan is running to cool the projector. fFor about 75 seconds after the projector is switched off and the luminous lamp cooling is started, the lamp indicators do not light up even if the power is switched on. After the power indicator lights in red, turn on the power again. fThe projector consumes power even in standby mode (power indicator lit in red). Refer to “Power...
Page 46
![Page 46
Chapter 3 Basic Operations — Switching on/off the projector
46 - ENGLISH
Initial setting (display language)
Select the language to show on the screen.
After completed the initial setting, you can change the display language from the [DISPLAY LANGUAGE] menu.
1) Press as to select the display language.
ENTER
1/4
Please select DISPLAY LANGUAGE.
INITIAL SETTING
SELECT
SET
2) Press the button to proceed to the initial setting.
Initial setting (installation setting)
Set [PROJECTION METHOD] depending on the...](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-45.png "Page 46
Chapter 3 Basic Operations — Switching on/off the projector
46 - ENGLISH
Initial setting (display language)
Select the language to show on the screen.
After completed the initial setting, you can change the display language from the [DISPLAY LANGUAGE] menu.
1) Press as to select the display language.
ENTER
1/4
Please select DISPLAY LANGUAGE.
INITIAL SETTING
SELECT
SET
2) Press the button to proceed to the initial setting.
Initial setting (installation setting)
Set [PROJECTION METHOD] depending on the...")
Chapter 3 Basic Operations — Switching on/off the projector 46 - ENGLISH Initial setting (display language) Select the language to show on the screen. After completed the initial setting, you can change the display language from the [DISPLAY LANGUAGE] menu. 1) Press as to select the display language. ENTER 1/4 Please select DISPLAY LANGUAGE. INITIAL SETTING SELECT SET 2) Press the button to proceed to the initial setting. Initial setting (installation setting) Set [PROJECTION METHOD] depending on the...
Page 47
![Page 47
Chapter 3 Basic Operations — Switching on/off the projector
ENGLISH - 47
Note
fThe above initial setting screen is the one displayed when the projector is switched on for the first time after purchase. When [ALL USER DATA] in the [PROJECTOR SETUP] menu → [INITIALIZE] is executed, the setting of [STANDBY MODE] before execution is displayed.
Initial setting (screen setting)
Set the screen format (aspect ratio) and display position of the image. After completed the initial setting, you can change the...](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-46.png "Page 47
Chapter 3 Basic Operations — Switching on/off the projector
ENGLISH - 47
Note
fThe above initial setting screen is the one displayed when the projector is switched on for the first time after purchase. When [ALL USER DATA] in the [PROJECTOR SETUP] menu → [INITIALIZE] is executed, the setting of [STANDBY MODE] before execution is displayed.
Initial setting (screen setting)
Set the screen format (aspect ratio) and display position of the image. After completed the initial setting, you can change the...")
Chapter 3 Basic Operations — Switching on/off the projector ENGLISH - 47 Note fThe above initial setting screen is the one displayed when the projector is switched on for the first time after purchase. When [ALL USER DATA] in the [PROJECTOR SETUP] menu → [INITIALIZE] is executed, the setting of [STANDBY MODE] before execution is displayed. Initial setting (screen setting) Set the screen format (aspect ratio) and display position of the image. After completed the initial setting, you can change the...
Page 48
![Page 48
Chapter 3 Basic Operations — Switching on/off the projector
48 - ENGLISH
6) If the input signal is an RGB signal, press the button.
7) Press the button to adjust the size of the image to match the screen.
8) Press the button again to adjust the focus.
9) Press the button again to adjust the zoom and the size of the image to match the screen.
Note
fWhen the projector is switched on for the first time after purchase as well as when [ALL USER DATA] in the [PROJECTOR SETUP] menu → [INITIALIZE] is...](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-47.png "Page 48
Chapter 3 Basic Operations — Switching on/off the projector
48 - ENGLISH
6) If the input signal is an RGB signal, press the button.
7) Press the button to adjust the size of the image to match the screen.
8) Press the button again to adjust the focus.
9) Press the button again to adjust the zoom and the size of the image to match the screen.
Note
fWhen the projector is switched on for the first time after purchase as well as when [ALL USER DATA] in the [PROJECTOR SETUP] menu → [INITIALIZE] is...")
Chapter 3 Basic Operations — Switching on/off the projector 48 - ENGLISH 6) If the input signal is an RGB signal, press the button. 7) Press the button to adjust the size of the image to match the screen. 8) Press the button again to adjust the focus. 9) Press the button again to adjust the zoom and the size of the image to match the screen. Note fWhen the projector is switched on for the first time after purchase as well as when [ALL USER DATA] in the [PROJECTOR SETUP] menu → [INITIALIZE] is...
Page 49
Chapter 3 Basic Operations — Projecting ENGLISH - 49 Projecting Check the attachment of the Projection Lens (x page 38), external device connection (x page 39), power cord connection (x page 44), and switch on the projector (x page 45) to start projecting. Select the image for projection, and adjust appearance of the projected image. Selecting the input signal Select an input signal. 1) Press the button on the control panel or the input selection (, *1, , , *1, ) buttons on the remote control. fThe...
Page 50
![Page 50
Chapter 3 Basic Operations — Projecting
50 - ENGLISH
Moving the lens to the home position
To move the lens to the home position, perform the following procedure.
1) While the [SHIFT] adjustment screen is displayed, press the button on the remote
control.
fThe [HOME POSITION] screen is displayed.
LENS
HOME POSITION
EXECUTE
CANCEL
MENU
ENTER
2) While the [HOME POSITION] screen is displayed (for approximately five seconds), press the
button.
f[PROGRESS] is displayed in the [HOME POSITION] screen, and...](http://img.usermanuals.tech/thumb/58/99581/w300_projector_manual_8188_d-49.png "Page 50
Chapter 3 Basic Operations — Projecting
50 - ENGLISH
Moving the lens to the home position
To move the lens to the home position, perform the following procedure.
1) While the [SHIFT] adjustment screen is displayed, press the button on the remote
control.
fThe [HOME POSITION] screen is displayed.
LENS
HOME POSITION
EXECUTE
CANCEL
MENU
ENTER
2) While the [HOME POSITION] screen is displayed (for approximately five seconds), press the
button.
f[PROGRESS] is displayed in the [HOME POSITION] screen, and...")
Chapter 3 Basic Operations — Projecting 50 - ENGLISH Moving the lens to the home position To move the lens to the home position, perform the following procedure. 1) While the [SHIFT] adjustment screen is displayed, press the button on the remote control. fThe [HOME POSITION] screen is displayed. LENS HOME POSITION EXECUTE CANCEL MENU ENTER 2) While the [HOME POSITION] screen is displayed (for approximately five seconds), press the button. f[PROGRESS] is displayed in the [HOME POSITION] screen, and...