Panasonic Projector PT-EW640 User Manual

Chapter 1 Preparation — Precautions for use
ENGLISH - 21
Accessories
Make sure that the following accessories are provided with your projector. Numbers enclosed in <  > show the number of 
accessories.
Wireless/wired remote control unit 
                        
Power cord
(TXFSX01RXQZ)
(TXFSX01RWDZ)
(TXFSX01RXRZ)
Lens hole cover 
(Only lens optional models)
(Attached to the projector at the time of purchase)
(6103619194)
Lens cover 
(Only models with lens)
(6103626291)
CD-ROM 
(TXFQB02VLR5)
AAA/R03 or...

Chapter 1 Preparation — Precautions for use
22 - ENGLISH
SoftwareMulti Projector Monitoring & 
Control Software (Windows)
This software allows you to monitor and control multiple 
projectors connected to the LAN.
Logo Transfer Software 
(Windows)
This software allows you to transfer original images, such as 
company logos to be displayed when projection starts, to the 
projector.
Optional accessories
Optional accessories 
(product name)Model No.
Projection LensZoom lensET-ELW20, ET -ELT20, ET-ELT21...

Chapter 1 Preparation — About your projector
ENGLISH - 23
About your projector
Remote control
1
3 2
4
5
8 7 6 6
9
10 16
17
18
19 15
11 13
20
22 21
24 23
12
14 25
26
Front
To p
Bottom
12
1 Power standby  buttonSets the projector to the state where the projector is switched off (standby mode) when the  switch on the projector is set to  and in the projection mode.
2 Power on  buttonStarts projection when the  switch on the projector is set to  when the power is switched off (standby mode).
3 Remote control...

Chapter 1 Preparation — About your projector
24 - ENGLISH
Attention
 fDo not drop the remote control. fAvoid contact with liquids or moisture. fDo not attempt to modify or disassemble the remote control. fPlease observe the following contents that are described on the back  of\
 the remote  control unit (see the right picture).    1. Do not use a new battery together with an old battery.    2. Do not use unspecified batteries.    3. Make sure the polarities (+ and -) are correct when inserting the...

Chapter 1 Preparation — About your projector
ENGLISH - 25
13 Connecting terminals (x page 26)
14 Security slotThis security slot is compatible with the Kensington security cables.
15 Air intake port
16 Air filter coverThe air filter unit is inside.
17 Control panel (x page 25)
202118 19
Projection direction
Bottom
To p
18 Burglar hook portAttaches a burglar prevention cable, etc.
19 Luminance sensor (x page 66)
20 Lens release button (x page 38)
21 Lamp coverThe lamp unit is inside.
Attention
 fDo not...

Chapter 1 Preparation — About your projector
26 - ENGLISH
 rConnecting terminals
1234 5 678
9 11
10 1213
1  terminal/ terminal (For PT-EZ580, PT-EW640 and PT-EX610)This is the LAN terminal to connect to the network. This is also used when connecting a device for transmitting video and audio signals via the LAN terminal.(For PT-EW540 and PT-EX510)This is the LAN terminal to connect to the network. The direction of LAN terminal is opposite with the illustration above.
2  terminalThis is the terminal to...

Chapter 1 Preparation — Using the remote control
ENGLISH - 27
Using the remote control
Inserting and removing the batteries
(ii)(i)
Fig. 1Fig. 2
1) Open the cover. (Fig. 1)
2) Insert the batteries and close the cover (insert the m side first). (Fig. 2)
 fWhen removing the batteries, perform the steps in reverse order.
Setting the ID number of the remote control
When you use the system with multiple projectors, you can operate all th\
e projectors simultaneously or each projector individually using single...

Chapter 1 Preparation — Using the remote control
28 - ENGLISH
Connecting to the projector with a cable
When controlling the projector by wired remote control, connect the  terminal on the projector to the remote control wired terminal on the remote control by a commercial M3 stereo mini plug cable.
The remote control is effective even in places where an obstacle stands in the light path or whe\
re devices are susceptible to outside light.
Connecting terminalsM3 stereo mini plug cable (commercially...

ENGLISH - 29
Chapter 2 Getting Started
This chapter describes things you need to do before using the projector \
such as the setup and connections.  

Chapter 2 Getting Started — Setting up
30 - ENGLISH
Setting up
Installation mode
There are four ways to set up the projector. Set the [PROJECTOR SETUP] menu → [PROJECTION METHOD] (x page 86) depending on the installation method.
Mounting on the ceiling and projecting forwardSetting on a desk/floor and projecting from rear(Using the translucent screen)
Menu itemMethodMenu itemMethod
[PROJECTION METHOD][FRONT/CEILING][PROJECTION METHOD][REAR/FLOOR]
Mounting on the ceiling and projecting from rear(Using the...