Panasonic Projector PT-DZ16KU User Manual

Chapter 4 Settings — [ADVANCED MENU] menu
ENGLISH - 81
2) Press the  button.
 fThe  [RASTER POSITION]  screen is displayed.
3) Press asqw to adjust the position.   

Chapter 4 Settings — [DISPLAY LANGUAGE] menu
82 - ENGLISH
[DISPLAY LANGUAGE] menu
On the menu screen, select [DISPLAY LANGUAGE] from the main menu, and display the sub‑menu.
Refer to “Navigating through the menu” (x
  page   59) for the operation of the menu screen.
 fPress 

as to select a language, and press the  button to set.
Changing the display language
You can select the language of the on-screen display.
ENTER
INITIAL SETTING
SELECT
SET
 fVarious menus, settings, adjustment screens, control...

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 83
[DISPLAY OPTION] menu
On the menu screen, select [DISPLAY OPTION] from the main menu, and select an item from 
the sub‑ menu.
Refer to “Navigating through the menu” ( x
  page   59) for the operation of the menu screen.
 fAfter selecting the item, press 

asqw to set.
[COLOR MATCHING]
Correct the color difference between projectors when using multiple projectors simultaneously.
Adjusting the color matching as desired
1) Press  as to select [COLOR...

Chapter 4 Settings — [DISPLAY OPTION] menu
84 - ENGLISH
2) Press qw to select [709MODE] or [MEASURED].
3)  
Press the  button.
 f The  [709MODE] or [MEASURED MODE] screen is displayed.
4) Press  as to select [MEASURED DATA].
5)  
Press the  button.
 f The  [MEASURED DATA] screen is displayed.
6) Measure the current luminance (Y) and the chromaticity coordinates (x, y) using the colorimeter .
7)  
Press 
 as to select a color, and press qw to adjust the setting.
 fSet [AUTO TESTPATTERN] to [ON] to display...

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 85
4) Press as to select [SCREEN POSITION].
 fWhen [SCREEN FORMA T] is set to [16:9], [SCREEN POSITION] cannot be selected and adjusted.
5) Press qw to adjust [SCREEN POSITION].
[AUTO SIGNAL]
Set whether to execute automatic setup of signals automatically.
The screen display position or signal level can be adjusted automatically without pressing the  button on the remote control 
on each occasion if you input unregistered signals frequently at...

Chapter 4 Settings — [DISPLAY OPTION] menu
86 - ENGLISH
Adjusting signal level automatically
1) Press as to select [AUTO SETUP].
2)  
Press the  button.
 f The  [AUTO SETUP] screen is displayed.
3) Press  as to select [SIGNAL LEVEL ADJUST].
4)  
Press 
 qw to switch the item.
[OFF] Does not perform automatic adjustment.
[ON] Adjusts black level (on-screen menu [BRIGHTNESS]) and white level (on-screen menu 
[CONTRAST]) when automatic setup is executed.
Note
 f
[SIGNAL LEVEL ADJUST] may not function...

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 87
 fWhen [AUT OMATIC SWITCHING] is set to [ENABLE], and [BACKUP INPUT STATUS] is [ACTIVE], the signal is switched to the backup 
input if the input signal is disrupted.
 f When [AUT

OMATIC SWITCHING] is set to [ENABLE] and the signal is automatically switched to the backup input due to disruption of the 
input signal, [BACKUP INPUT STATUS] changes to [INACTIVE]. In this case, switching to the backup input signal is not possible until the 
original...

Chapter 4 Settings — [DISPLAY OPTION] menu
88 - ENGLISH
[AUTO]Automatically sets the signal level.
[0‑255:PC] Select this item when the signal output from the DVI
- D terminal of an external device (such as a 
computer) is input to the  terminal.
[16‑235] Select this item when the signal output from the HDMI terminal of an external device (such as a Blu-
ray disc player) is input to the  terminal via a conversion cable or similar cable.
Note
 f
The optimal setting varies depending on the output setting...

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 89
[AUTO]Automatically select [12-bit] or [10-bit].
[12 ‑ bit] Fixes to [12-bit].
[10
‑ bit] Fixes to [10-bit].
Setting [3G-SDI MAPPING]
1) Press as to select [SDI IN].
2)  
Press the  button.
 f The  [SDI IN] screen is displayed.
3) Press  as to select [3G-SDI MAPPING].
4)  
Press 
 qw to switch the item.
[AUTO] Automatically select [LEVEL A] or [LEVEL B].
[LEVEL A] Fixes to [LEVEL A].
[LEVEL B] Fixes to [LEVEL B].
Note
 fDoes not operate during SD -...

Chapter 4 Settings — [DISPLAY OPTION] menu
90 - ENGLISH
[2]Sets to blue.
[3] Sets to white.
[4] Sets to green.
[5] Sets to peach.
[6] Sets to brown.
Setting [OSD MEMORY]
Set hold for the position of the menu screen (OSD) cursor.
1) Press as to select [ON-SCREEN DISPLAY].
2)  
Press the  button.
 f The  [ON-SCREEN DISPLAY] screen is displayed.
3) Press  as to select [OSD MEMORY].
4)  
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[ON] Holds the cursor position....