Panasonic Projector PT-DZ16KU User Manual

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 101
When [MODE] of [BRIGHTNESS CONTROL SETUP] is set to 
[AUTO] and [LINK] is set from [GROUP A] to [GROUP D]
The screen shows the status of the brightness control of 
synchronized projectors (up to eight units), including the projector 
being controlled through the on-screen menu.
2 1
3
4
5 
7
8
1:
2:
3:
4:
5:
6:
7:192. 168. 30.   2
192. 168. 30.   3
192. 168. 30.   4
LINK
UPDATE PROJECTOR
GROUP A
PROJECTOR2
PROJECTOR3
BRIGHTNESS CONTROL STATUS
MENU...

Chapter 4 Settings — [PROJECTOR SETUP] menu
102 - ENGLISH
Brightness control adjustment procedure example
The steps exemplify an adjustment to link the brightness of eight projectors connected in a network.
1) Connect all projectors to the hub using LAN cables. (x   page   123)
2)  
Switch on all projectors and start projection.
3)

 
Make the setting of [LAMP
  SELECT] of all projectors the same so that the number of lamps to be lit 
are the same.
4)
 
Set [MODE] of [BRIGHTNESS CONTROL
  SETUP] to...

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 103
[SCHEDULE]
Set the command execution schedule for each day of the week.
Enabling/disabling the schedule function
1) Press as to select [SCHEDULE].
2)  
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[OFF] Disables the schedule function.
[ON] Enables the schedule function. Refer to “How to assign a program” (
x
  page   103) or “How to set a 
program” (x
  page   103) for how to set the schedule.
Note
 fWhen...

Chapter 4 Settings — [PROJECTOR SETUP] menu
104 - ENGLISH
[COMMAND]Detailed settings of 
[COMMAND] Description
[INPUT] [VIDEO]
Switches the input to VIDEO.
[RGB1] Switches the input to RGB1.
[RGB2] Switches the input to RGB2.
[DVI
- D]Switches the input to DVI
- D.
[HDMI] Switches the input to HDMI.
[SDI] Switches the input to SDI.
[LAMP SELECT] [SINGLE]
Turns on one lamp. (The lamp with shorter runtime will 
automatically light.)
[DUAL] Turns on two lamps. (The lamp with shorter runtime will...

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 105
Setting the communication condition of the  terminal
1) Press as to select [RS ‑ 232C].
2)  
Press the  button.
 f The  [RS ‑ 232C] screen is displayed.
3) Press  as to select [(IN) BAUDRATE].
4)  
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[9600]
Select the proper speed.
[19200]
[38400]
5) Press  as to select [(IN) PARITY].
6)  
Press 
 qw to switch the item.
 fThe items will switch each time you press...

Chapter 4 Settings — [PROJECTOR SETUP] menu
106 - ENGLISH
6) Press qw to switch the item.
[A] - [Z] Controls multiple projectors simultaneously by sending the ID of RS - 232C. You can set groups from 
[A] to [Z]. The projector responds when the ID of RS - 232C matches the setting.
7) Press as to select [RESPONSE(ID GROUP)].
8)  
Press 
 qw to switch the item.
[ON] Returns the response when the ID setting is GROUP.
[OFF] Does not return the response when the ID setting is GROUP.
Note
 fRefer to “/...

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 107
[SIGNAL INFORMATION][MEMORY NO.]
Displays the memory number of the input signal.
[INPUT] Displays the input terminal currently selected.
[SIGNAL NAME] Displays the input signal name.
[SIGNAL FREQUENCY] Displays the frequency of the input signal.
[SYNC.STATE] Displays the synch polarity of the input signal.
[V.SYNC WIDTH] Displays the vertical sync signal pulse width of the input signal.
[SCAN TYPE] Displays the scan type of the input signal....

Chapter 4 Settings — [PROJECTOR SETUP] menu
108 - ENGLISH
[DISABLE]Disables the  button.
[P IN P] Switches [OFF]/[USER1]/[USER2]/[USER3] in [P IN P]. ( x
  page   112)
[SUB MEMORY] Displays the sub memory list. ( x
  page   117)
[SYSTEM SELECTOR] Switches the [SYSTEM SELECTOR] setting. (x
  page   70)
[SYSTEM DAYLIGHT VIEW] Switches the [SYSTEM DAYLIGHT VIEW] setting. ( x
  page   68)
[FREEZE] Temporarily pauses the image. ( x
  page   92)
[WAVEFORM MONITOR] Displays the waveform of the input signal. (...

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 109
[LENS CALIBRATION]
Automatically set the lens shift limit values and home position for the projector.
1) Press as to select [LENS CALIBRATION].
2)  
Press the  button.
 f The confirmation screen is displayed.
3) Press  qw to select [OK], and press the  button.
 fTo cancel, select [CANCEL].
 fThe lens moves up, down, left, and right to automatically set the lens shift limit values and home position.
 fThe lens stops to complete the calibration....

Chapter 4 Settings — [PROJECTOR SETUP] menu
110 - ENGLISH
 fThe zoom and focus positions may have shifted after lens memory was loaded. Readjust as necessary .
Beware of shift, as errors in zoom position are particularly significant.
 f When a lens is replaced, readjust and save the lens memory again. fIf a lens without zoom function is used, the lens memory of the zoom position does not operate. fWhen [LENS MEMOR

Y LOAD] is assigned to the  button, the lens memory is loaded in order each time you press...