Panasonic Projector PT-DZ16KU User Manual

Chapter 4 Settings — [SECURITY] menu
ENGLISH - 121
4) Press asqw to select [OK], and press the  button.
 fTo cancel, select [CANCEL].
Attention
 fThe initial password is “AAAA” by the factory default or when [ALL  USER DA TA] in [INITIALIZE] (x   page   111) is executed. fChange the password periodically that is hard to guess.   

Chapter 4 Settings — [NETWORK] menu
122 - ENGLISH
[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an item from the sub‑menu.
Refer to “Navigating through the menu” (x
  page   59) for the operation of the menu screen.
 fAfter selecting the item, press 

asqw to set.
[NETWORK SETUP]
Perform the initial setting of the network before using the network function.
1) Press  as to select [NETWORK SETUP].
2)  
Press the  button.
 f The  [NETWORK SETUP] screen is displayed.
3)...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 123
5) When the confirmation screen is displayed, press qw  to select [OK], and press the  button.
[NETWORK STATUS]
Display the status of the projector network.
1) Press as to select [NETWORK STATUS].
2)  
Press the  button.
 f The  [NETWORK STATUS] screen is displayed.
[Art-Net SETUP]
Make settings to use the Art-Net function.
1) Press  as to select [Art-Net SETUP].
2)  
Press the  button.
 f The  [Art-Net SETUP] screen is displayed.
3) Press  as to select...

Chapter 4 Settings — [NETWORK] menu
124 - ENGLISH
 fA web browser is required to use this function. Confirm that the web browser can be used beforehand.
Compatible browser: Internet Explorer 7.0/8.0/9.0/10.0/11.0 (Windows OS), Safari 4.0/5.0/6.0/7.0 (Mac OS)
 f Communication with an E-mail server is required to use the E-mail function. Confirm that the E-mail can be used beforehand.
 fUse a LAN cable that is compatible with category 5 or higher

.
 fUse a LAN cable of 100

  m (328'1") or...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 125
4) Click OK.
 fThe [Projector status] page is displayed.
Note
 fIf you use a web browser to control the projector , set [WEB CONTROL] to [ON] in [NETWORK CONTROL] ( x   page   122). fDo not perform setting or control simultaneously by starting up multiple web browsers. Do not set or control the projector from multiple 
computers.
 fChange the password first. ( x

  page   138)
 fThe administrator rights allow use of all functions. 

The user rights allow...

Chapter 4 Settings — [NETWORK] menu
126 - ENGLISH
[Projector status] page
Click [Status] → [Projector status].
Display the status of the projector for the following items.
13
14
156
7
8
9
1
2
3
4
16
5
10
11
12
1 [PROJECTOR TYPE]
Displays the type of the projector.
2
 
[MAIN VERSION]
Displays the firmware version of the projector

.
3
 
[POWER]
Displays the status of the power

.
4
 
[SHUTTER]
Displays the status of the shutter (ON: closed, OFF: open).
5

 
[LAMP
  SELECT]
Displays the setting status of...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 127
Error information page
When [Error (Detail)] or [Warning (Detail)] is displayed in the self-diagnosis display of the [Projector status] screen, click it to display the 
error/warning details.
 f The projector may go into the standby status to protect the projector depending on the contents of the error .
1
1 Self-diagnosis result display
Displays the item check results.
[OK]:
Indicates that operation is normal.
[F
AILED]:
Indicates that there is a...

Chapter 4 Settings — [NETWORK] menu
128 - ENGLISH
ItemDescription
[AIR FILTER] There is too much dust accumulated in the air filter unit. Turn the  
switch  (
x
  page   50), and clean the air filter. (x   page   143)
 r[WARNING] items
Item Description
[AC POWER] AC input voltage is weak. Use electric wiring that can sufficiently withstand the power 
consumption of the projector.
[LOW-TEMPERATURE] The temperature around the optics module inside the projector is low
. Projection cannot 
be started until...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 129
[Access log] page
Click [Status] → [Access log].
The log such as user name accessed to the WEB control page, accessed IP address, accessed time is displayed.
Note
 f[Access error log]/[Access log] will display the recent few thousand accesses/requests.  All information may not be displayed when many 
accesses/requests are made at one time.
 f When information in [Access error log]/[Access log] exceeds a certain amount, they are erased from the oldest....

Chapter 4 Settings — [NETWORK] menu
130 - ENGLISH
[Detail control] page
Click [Projector control] → [Detail control].
5 4
3
2
1
10 9
8
7 6
1 Control of the projector
The projector is controlled by clicking the buttons in the same 
way as the buttons on the remote control. After control, the on-
screen display of the projector at the right of the control page is 
updated.
2
 
[SUB MEMOR
 Y]
Switches the sub memory.
3
 
[SYSTEM DA
 YLIGHT VIEW]
Switches to system daylight view settings.
4
 
[FREEZE]
T...