Panasonic Projector PT-DZ16KU User Manual
Have a look at the manual Panasonic Projector PT-DZ16KU User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 116
Chapter 4 Settings — [SIGNAL LIST] menu
116 - ENGLISH
fTo cancel the deletion, press the button to return to the [REGISTERED SIGNAL LIST] screen.
3) Press the button.
fThe selected signal will be deleted.
Note
fA registered signal can also be deleted from [ENTRY SIGNAL DELETE] on the [REGISTERED SIGNAL SETUP] screen.
Protecting the registered signal
1) Press asqw to select the signal to protect.
2)
Press the button.
f The [REGISTERED SIGNAL STATUS] screen is displayed.
3) Press the button....](http://img.usermanuals.tech/thumb/58/99610/w64_projector_manual_8358_d-115.png "Page 116
Chapter 4 Settings — [SIGNAL LIST] menu
116 - ENGLISH
fTo cancel the deletion, press the button to return to the [REGISTERED SIGNAL LIST] screen.
3) Press the button.
fThe selected signal will be deleted.
Note
fA registered signal can also be deleted from [ENTRY SIGNAL DELETE] on the [REGISTERED SIGNAL SETUP] screen.
Protecting the registered signal
1) Press asqw to select the signal to protect.
2)
Press the button.
f The [REGISTERED SIGNAL STATUS] screen is displayed.
3) Press the button....")
![Page 117
Chapter 4 Settings — [SIGNAL LIST] menu
ENGLISH - 117
Sub memory
The projector has a sub memory function that can register the multiple image adjustment data, even if it is recognized as the same signal by
the frequency or format of the synchronization signal source.
Use this function when you need to adjust the picture quality such as switching of the aspect ratio or white balance by the same
synchronization signal source. The sub memory includes all the data that can be adjusted for each signal, such...](http://img.usermanuals.tech/thumb/58/99610/w64_projector_manual_8358_d-116.png "Page 117
Chapter 4 Settings — [SIGNAL LIST] menu
ENGLISH - 117
Sub memory
The projector has a sub memory function that can register the multiple image adjustment data, even if it is recognized as the same signal by
the frequency or format of the synchronization signal source.
Use this function when you need to adjust the picture quality such as switching of the aspect ratio or white balance by the same
synchronization signal source. The sub memory includes all the data that can be adjusted for each signal, such...")
![Page 118
Chapter 4 Settings — [SECURITY] menu
118 - ENGLISH
[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an item from the sub‑menu.
Refer to “Navigating through the menu” (x
page 59) for the operation of the menu screen.
fWhen the projector is used for the first time
Initial password: Press awsqawsq in order
, and press the button.
fAfter selecting the item, press
asqw to set.
Attention
fWhen you select the [SECURITY] menu and press the button, entering a...](http://img.usermanuals.tech/thumb/58/99610/w64_projector_manual_8358_d-117.png "Page 118
Chapter 4 Settings — [SECURITY] menu
118 - ENGLISH
[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an item from the sub‑menu.
Refer to “Navigating through the menu” (x
page 59) for the operation of the menu screen.
fWhen the projector is used for the first time
Initial password: Press awsqawsq in order
, and press the button.
fAfter selecting the item, press
asqw to set.
Attention
fWhen you select the [SECURITY] menu and press the button, entering a...")
![Page 119
Chapter 4 Settings — [SECURITY] menu
ENGLISH - 119
Note
fThe entered password is displayed with*marks on the screen. fWhen numerical values are used for the security password, the security password is required to be initialized if the remote control is lost.
Consult your dealer for the method of initialization.
[DISPLAY SETTING]
Overlap the security message (text or image) over the projecting image.
1) Press as to select [DISPLAY SETTING].
2)
Press
qw to switch the item.
fThe items will switch...](http://img.usermanuals.tech/thumb/58/99610/w64_projector_manual_8358_d-118.png "Page 119
Chapter 4 Settings — [SECURITY] menu
ENGLISH - 119
Note
fThe entered password is displayed with*marks on the screen. fWhen numerical values are used for the security password, the security password is required to be initialized if the remote control is lost.
Consult your dealer for the method of initialization.
[DISPLAY SETTING]
Overlap the security message (text or image) over the projecting image.
1) Press as to select [DISPLAY SETTING].
2)
Press
qw to switch the item.
fThe items will switch...")
![Page 120
Chapter 4 Settings — [SECURITY] menu
120 - ENGLISH
Enabling/disabling any button
1) Press as to select [CONTROL DEVICE SETUP].
2)
Press the button.
f The [CONTROL DEVICE SETUP] screen is displayed.
3) Press as to select [CONTROL PANEL] or [REMOTE CONTROL].
4)
Press the button.
5)
Press
as to select [CONTROL PANEL] or [REMOTE CONTROL].
6)
Press
qw to switch [USER].
7)
Press
as to select the button item to set.
fWhen [INPUT SELECT BUTTON] is selected, press the button, and then...](http://img.usermanuals.tech/thumb/58/99610/w64_projector_manual_8358_d-119.png "Page 120
Chapter 4 Settings — [SECURITY] menu
120 - ENGLISH
Enabling/disabling any button
1) Press as to select [CONTROL DEVICE SETUP].
2)
Press the button.
f The [CONTROL DEVICE SETUP] screen is displayed.
3) Press as to select [CONTROL PANEL] or [REMOTE CONTROL].
4)
Press the button.
5)
Press
as to select [CONTROL PANEL] or [REMOTE CONTROL].
6)
Press
qw to switch [USER].
7)
Press
as to select the button item to set.
fWhen [INPUT SELECT BUTTON] is selected, press the button, and then...")
![Page 121
Chapter 4 Settings — [SECURITY] menu
ENGLISH - 121
4) Press asqw to select [OK], and press the button.
fTo cancel, select [CANCEL].
Attention
fThe initial password is “AAAA” by the factory default or when [ALL USER DA TA] in [INITIALIZE] (x page 111) is executed. fChange the password periodically that is hard to guess.](http://img.usermanuals.tech/thumb/58/99610/w64_projector_manual_8358_d-120.png "Page 121
Chapter 4 Settings — [SECURITY] menu
ENGLISH - 121
4) Press asqw to select [OK], and press the button.
fTo cancel, select [CANCEL].
Attention
fThe initial password is “AAAA” by the factory default or when [ALL USER DA TA] in [INITIALIZE] (x page 111) is executed. fChange the password periodically that is hard to guess.")
![Page 122
Chapter 4 Settings — [NETWORK] menu
122 - ENGLISH
[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an item from the sub‑menu.
Refer to “Navigating through the menu” (x
page 59) for the operation of the menu screen.
fAfter selecting the item, press
asqw to set.
[NETWORK SETUP]
Perform the initial setting of the network before using the network function.
1) Press as to select [NETWORK SETUP].
2)
Press the button.
f The [NETWORK SETUP] screen is displayed.
3)...](http://img.usermanuals.tech/thumb/58/99610/w64_projector_manual_8358_d-121.png "Page 122
Chapter 4 Settings — [NETWORK] menu
122 - ENGLISH
[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an item from the sub‑menu.
Refer to “Navigating through the menu” (x
page 59) for the operation of the menu screen.
fAfter selecting the item, press
asqw to set.
[NETWORK SETUP]
Perform the initial setting of the network before using the network function.
1) Press as to select [NETWORK SETUP].
2)
Press the button.
f The [NETWORK SETUP] screen is displayed.
3)...")
![Page 123
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 123
5) When the confirmation screen is displayed, press qw to select [OK], and press the button.
[NETWORK STATUS]
Display the status of the projector network.
1) Press as to select [NETWORK STATUS].
2)
Press the button.
f The [NETWORK STATUS] screen is displayed.
[Art-Net SETUP]
Make settings to use the Art-Net function.
1) Press as to select [Art-Net SETUP].
2)
Press the button.
f The [Art-Net SETUP] screen is displayed.
3) Press as to select...](http://img.usermanuals.tech/thumb/58/99610/w64_projector_manual_8358_d-122.png "Page 123
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 123
5) When the confirmation screen is displayed, press qw to select [OK], and press the button.
[NETWORK STATUS]
Display the status of the projector network.
1) Press as to select [NETWORK STATUS].
2)
Press the button.
f The [NETWORK STATUS] screen is displayed.
[Art-Net SETUP]
Make settings to use the Art-Net function.
1) Press as to select [Art-Net SETUP].
2)
Press the button.
f The [Art-Net SETUP] screen is displayed.
3) Press as to select...")
![Page 124
Chapter 4 Settings — [NETWORK] menu
124 - ENGLISH
fA web browser is required to use this function. Confirm that the web browser can be used beforehand.
Compatible browser: Internet Explorer 7.0/8.0/9.0/10.0/11.0 (Windows OS), Safari 4.0/5.0/6.0/7.0 (Mac OS)
f Communication with an E-mail server is required to use the E-mail function. Confirm that the E-mail can be used beforehand.
fUse a LAN cable that is compatible with category 5 or higher
.
fUse a LAN cable of 100
m (328'1") or...](http://img.usermanuals.tech/thumb/58/99610/w64_projector_manual_8358_d-123.png "Page 124
Chapter 4 Settings — [NETWORK] menu
124 - ENGLISH
fA web browser is required to use this function. Confirm that the web browser can be used beforehand.
Compatible browser: Internet Explorer 7.0/8.0/9.0/10.0/11.0 (Windows OS), Safari 4.0/5.0/6.0/7.0 (Mac OS)
f Communication with an E-mail server is required to use the E-mail function. Confirm that the E-mail can be used beforehand.
fUse a LAN cable that is compatible with category 5 or higher
.
fUse a LAN cable of 100
m (328'1\") or...")
![Page 125
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 125
4) Click OK.
fThe [Projector status] page is displayed.
Note
fIf you use a web browser to control the projector , set [WEB CONTROL] to [ON] in [NETWORK CONTROL] ( x page 122). fDo not perform setting or control simultaneously by starting up multiple web browsers. Do not set or control the projector from multiple
computers.
fChange the password first. ( x
page 138)
fThe administrator rights allow use of all functions.
The user rights allow...](http://img.usermanuals.tech/thumb/58/99610/w64_projector_manual_8358_d-124.png "Page 125
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 125
4) Click OK.
fThe [Projector status] page is displayed.
Note
fIf you use a web browser to control the projector , set [WEB CONTROL] to [ON] in [NETWORK CONTROL] ( x page 122). fDo not perform setting or control simultaneously by starting up multiple web browsers. Do not set or control the projector from multiple
computers.
fChange the password first. ( x
page 138)
fThe administrator rights allow use of all functions.
The user rights allow...")
![Page 126
Chapter 4 Settings — [NETWORK] menu
126 - ENGLISH
[Projector status] page
Click [Status] → [Projector status].
Display the status of the projector for the following items.
13
14
156
7
8
9
1
2
3
4
16
5
10
11
12
1 [PROJECTOR TYPE]
Displays the type of the projector.
2
[MAIN VERSION]
Displays the firmware version of the projector
.
3
[POWER]
Displays the status of the power
.
4
[SHUTTER]
Displays the status of the shutter (ON: closed, OFF: open).
5
[LAMP
SELECT]
Displays the setting status of...](http://img.usermanuals.tech/thumb/58/99610/w64_projector_manual_8358_d-125.png "Page 126
Chapter 4 Settings — [NETWORK] menu
126 - ENGLISH
[Projector status] page
Click [Status] → [Projector status].
Display the status of the projector for the following items.
13
14
156
7
8
9
1
2
3
4
16
5
10
11
12
1 [PROJECTOR TYPE]
Displays the type of the projector.
2
[MAIN VERSION]
Displays the firmware version of the projector
.
3
[POWER]
Displays the status of the power
.
4
[SHUTTER]
Displays the status of the shutter (ON: closed, OFF: open).
5
[LAMP
SELECT]
Displays the setting status of...")
Chapter 4 Settings — [SECURITY] menu ENGLISH - 121 4) Press asqw to select [OK], and press the button. fTo cancel, select [CANCEL]. Attention fThe initial password is “AAAA” by the factory default or when [ALL USER DA TA] in [INITIALIZE] (x page 111) is executed. fChange the password periodically that is hard to guess.
Chapter 4 Settings — [NETWORK] menu 122 - ENGLISH [NETWORK] menu On the menu screen, select [NETWORK] from the main menu, and select an item from the sub‑menu. Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. fAfter selecting the item, press asqw to set. [NETWORK SETUP] Perform the initial setting of the network before using the network function. 1) Press as to select [NETWORK SETUP]. 2) Press the button. f The [NETWORK SETUP] screen is displayed. 3) Press as to select an item, and change the settings according to the operation instructions of the menu. [PROJECTOR NAME] Change the setting when using a DHCP server. [DHCP] Set to [ON] when obtaining an IP address automatically using a DHCP server. Set to [OFF] when not using a DHCP server. [IP ADDRESS] Enter the IP address when not using a DHCP server. [SUBNET MASK] Enter the subnet mask when not using a DHCP server. [DEFAULT GATEWAY] Enter the default gateway address when not using a DHCP server. [STORE] Save the current network settings. 4) Press as to select [STORE], and press the button. 5) When the confirmation screen is displayed, press qw to select [OK], and press the button. Note f When using a DHCP server, confirm that the DHCP server is running. fConsult your network administrator regarding the IP address, subnet mask, and default gateway. [NETWORK CONTROL] Set up the control method of the network. 1) Press as to select [NETWORK CONTROL]. 2) Press the button. f The [NETWORK CONTROL] screen is displayed. 3) Press as to select an item, and press qw to change the setting. [WEB CONTROL] Set to [ON] to control with the web browser. [PJLink CONTROL] Set to [ON] to control with the PJLink protocol. [COMMAND CONTROL] Set to [ON] to control with the / terminal control command format (x page 164). Refer to “Control commands via LAN” ( x page 158). [COMMAND PORT] Set the port number used for command control. [AMX D.D.] Set to [ON] to control with the controller of AMX Corporation. Setting this function to [ON] enables detection through “AMX Device Discovery”. For details, refer to the website of AMX Corporation. URL http://www.amx.com/ [STORE] Save the current network control settings. 4) Press as to select [STORE], and press the button.
Chapter 4 Settings — [NETWORK] menu ENGLISH - 123 5) When the confirmation screen is displayed, press qw to select [OK], and press the button. [NETWORK STATUS] Display the status of the projector network. 1) Press as to select [NETWORK STATUS]. 2) Press the button. f The [NETWORK STATUS] screen is displayed. [Art-Net SETUP] Make settings to use the Art-Net function. 1) Press as to select [Art-Net SETUP]. 2) Press the button. f The [Art-Net SETUP] screen is displayed. 3) Press as to select an item. [Art-Net] Sets to [ON] when you use the Art-Net function. Sets to [OFF] when you do not use the Art-Net function. [PORT ADDRESS] Enter a port address where the projector processes Art-Net. [START ADDRESS] Enter a start address where the projector processes Art-Net. 4) Press qw to switch the setting. 5) Press as to select [STORE], and press the button. 6) When the confirmation screen is displayed, press qw to select [OK], and press the button. Network connection The projector has a network function, and the following operations are available from the computer using the web control. fSetting and adjustment of the projector fDisplay of the projector status fSetting of E-mail message to be sent Attention fWhen a LAN cable is directly connected to the projector , the network connection must be made indoors. Note fA LAN cable is required to use the network function. rExample of a normal network connection Computer Projector LAN cable (straight) LAN cable (straight) Hub
Chapter 4 Settings — [NETWORK] menu 124 - ENGLISH fA web browser is required to use this function. Confirm that the web browser can be used beforehand. Compatible browser: Internet Explorer 7.0/8.0/9.0/10.0/11.0 (Windows OS), Safari 4.0/5.0/6.0/7.0 (Mac OS) f Communication with an E-mail server is required to use the E-mail function. Confirm that the E-mail can be used beforehand. fUse a LAN cable that is compatible with category 5 or higher . fUse a LAN cable of 100 m (328'1") or shorter. Name and function of network function parts 3 2 1 1 LAN LINK/ACT lamp (green) Lights on when connected. Blinks when transmitting/receiving data. 2 terminal (10Base‑T/100Base‑TX) Used to connect the LAN cable here. 3 LAN10/100 lamp (yellow) Lights on when connected to the 100Base - TX. Accessing from the web browser 1) Start up the web browser on the computer . 2) Enter the IP address set on the projector into the URL entry field of the web browser. 3) Enter the user name and the password. f The factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the password is panasonic (lower case).
Chapter 4 Settings — [NETWORK] menu ENGLISH - 125 4) Click OK. fThe [Projector status] page is displayed. Note fIf you use a web browser to control the projector , set [WEB CONTROL] to [ON] in [NETWORK CONTROL] ( x page 122). fDo not perform setting or control simultaneously by starting up multiple web browsers. Do not set or control the projector from multiple computers. fChange the password first. ( x page 138) fThe administrator rights allow use of all functions. The user rights allow use of [Projector status] (x page 126), confirmation of the error information page ( x page 127), [Network status] (x page 128), [Basic control] (x page 129), and [Change password] (x page 138) only. f Access will be locked for few minutes when an incorrect password is entered three times consecutively . fSome items on the projector setting page use the Javascript function of the web browser . The projector may not be able to be controlled properly if this function is disabled on the browser settings. f If the screen for the web control is not displayed, consult your network administrator . fWhile updating the screen for the web control, the screen may appear white for a moment, but it is not a malfunction. Descriptions of items 1 2 3 4 5 1 Page tab Switches pages by clicking this item. 2 [Status] The status of the projector is displayed by clicking this item. 3 [Projector control] The [Projector control] page is displayed by clicking this item. 4 [Detailed set up] The [Detailed set up] page is displayed by clicking this item. 5 [Change password] The [Change password] page is displayed by clicking this item.
Chapter 4 Settings — [NETWORK] menu 126 - ENGLISH [Projector status] page Click [Status] → [Projector status]. Display the status of the projector for the following items. 13 14 156 7 8 9 1 2 3 4 16 5 10 11 12 1 [PROJECTOR TYPE] Displays the type of the projector. 2 [MAIN VERSION] Displays the firmware version of the projector . 3 [POWER] Displays the status of the power . 4 [SHUTTER] Displays the status of the shutter (ON: closed, OFF: open). 5 [LAMP SELECT] Displays the setting status of [LAMP SELECT] (x page 96). 6 [SERIAL NUMBER] Displays the serial number of the projector. 7 [NETWORK VERSION] Displays the version of the firmware of the network. 8 [REMOTE2 ST ATUS] Displays the control status of the terminal. 9 [OSD] Displays the status of the on-screen display . 10 [INPUT] Displays the status of the selected input. 11 [INT AKE AIR TEMPERATURE] Displays the status of the air intake temperature of the projector. 12 [OPTICS MODULE TEMPERA TURE] Displays the status of the internal temperature of the projector . 13 [AROUND LAMP TEMPERATURE] Displays the status of the temperature around the lamp of the projector. 14 [LAMP1], [LAMP2], [LAMP3], [LAMP4], [RUNTIME] Displays the lighting status and runtime of the lamp. 15 [SELF TEST] Displays the self-diagnosis information. 16 [PROJECT OR RUNTIME] Displays the runtime of the projector.
Chapter 4 Settings — [NETWORK] menu ENGLISH - 127 Error information page When [Error (Detail)] or [Warning (Detail)] is displayed in the self-diagnosis display of the [Projector status] screen, click it to display the error/warning details. f The projector may go into the standby status to protect the projector depending on the contents of the error . 1 1 Self-diagnosis result display Displays the item check results. [OK]: Indicates that operation is normal. [F AILED]: Indicates that there is a problem. [WARNING]: Indicates that there is a warning. r [FAILED] items Item Description [MAIN CPU BUS] There is a problem with the microcomputer circuitry. Consult your dealer. [FAN] There is a problem with the fan or the fan drive circuit. Consult your dealer . [INTAKE AIR TEMPERATURE] The intake air temperature is too high. The projector may be used in an environment where the temperature is high, such as near a heating appliance. [OPTICS MODULE TEMPERATURE] The temperature around the optics module inside the projector is high. The projector may be used in an environment where the temperature is high, such as near a heating appliance. [AROUND LAMP TEMPERATURE] The temperature around the lamp is high. The air exhaust port may be blocked. [LAMP1 REMAIN TIME] The runtime of the lamp has exceeded the specified time, and it is time to replace the lamp. [LAMP2 REMAIN TIME] [LAMP3 REMAIN TIME] [LAMP4 REMAIN TIME] [LAMP1 STATUS] The lamp has failed to turn on. Wait a while until the luminous lamp cools off, and then turn on the power. [LAMP2 STATUS] [LAMP3 STATUS] [LAMP4 STATUS] [APERTURE(CONTRAST-SHUTTER)] There is a problem in the contrast shutter circuit for dynamic iris. Consult your dealer . [SHUTTER(MUTE-SHUTTER)] There is a problem with the shutter circuitry. Consult your dealer. [INTAKE AIR TEMP.SENSOR] There is a problem with the sensor used to detect intake temperature. Consult your dealer. [OPTICS MODULE TEMP.SENSOR] There is a problem with the sensor used to detect temperature inside the projector . Consult your dealer. [AROUND LAMP TEMP.SENSOR] There is a problem with the sensor used to detect exhaust air temperature. Consult your dealer. [BATTERY] Battery replacement is required. Consult your dealer. [LENS MOUNTER] There is a problem in the lens mounter. Consult your dealer. [BRIGHTNESS SENSOR] There is a problem with the luminance sensor. If problems persist even after switching on the power, consult your dealer. [ANGLE SENSOR] There is a problem with the sensor that detects angle. Consult your dealer . [FILTER UNIT] The air filter unit is not attached. Check the connection of the air filter unit. (x page 143)
Chapter 4 Settings — [NETWORK] menu 128 - ENGLISH ItemDescription [AIR FILTER] There is too much dust accumulated in the air filter unit. Turn the switch ( x page 50), and clean the air filter. (x page 143) r[WARNING] items Item Description [AC POWER] AC input voltage is weak. Use electric wiring that can sufficiently withstand the power consumption of the projector. [LOW-TEMPERATURE] The temperature around the optics module inside the projector is low . Projection cannot be started until the optics module becomes warm. [HORIZONTAL TILT] The projector is used tilted at an angle that exceeds 15° from the horizontal plane. Using the projector in such a condition may shorten the life of the components or result in malfunctions. [NOT SUPPORTED LAMP] The lamp unit for portrait mode is attached. Replace the lamp unit to that for the projector. [Network status] page Click [Status] → [Network status]. The current network setting status is displayed. [Access error log] page Click [Status] → [Access error log]. The error log on the web server is displayed such as access to the pages that do not exist or access with unauthorized user names or passwords.
Chapter 4 Settings — [NETWORK] menu ENGLISH - 129 [Access log] page Click [Status] → [Access log]. The log such as user name accessed to the WEB control page, accessed IP address, accessed time is displayed. Note f[Access error log]/[Access log] will display the recent few thousand accesses/requests. All information may not be displayed when many accesses/requests are made at one time. f When information in [Access error log]/[Access log] exceeds a certain amount, they are erased from the oldest. fCheck [Access error log]/[Access log] periodically . [Basic control] page Click [Projector control] → [Basic control]. 1 2 5 3 4 1 [POWER] T urns on/off the power. 2 [SHUTTER] Switches the setting whether to use the shutter function (closing/opening of the shutter). 3 [OSD] Switches on (display)/of f (hide) the on-screen display function. 4 [SYSTEM] Switches the system method. 5 [INPUT SELECT] Switches the input signal.
Chapter 4 Settings — [NETWORK] menu 130 - ENGLISH [Detail control] page Click [Projector control] → [Detail control]. 5 4 3 2 1 10 9 8 7 6 1 Control of the projector The projector is controlled by clicking the buttons in the same way as the buttons on the remote control. After control, the on- screen display of the projector at the right of the control page is updated. 2 [SUB MEMOR Y] Switches the sub memory. 3 [SYSTEM DA YLIGHT VIEW] Switches to system daylight view settings. 4 [FREEZE] T emporarily pauses the image. 5 [P IN P] Switches the P IN P setting. 6 On-screen display of the projector Displays the same items as shown on the on-screen display of the projector . You can check or change the settings of the menus. It is displayed even if the on-screen display function is set to off (hide). 7 [W AVEFORM MONITOR] Displays the waveform of the input signal. 8 [LENS] Adjusts the projection lens. 9 [TEST P ATTERN] Displays the test pattern. 10 [GET OSD] Updates the on-screen display of the projector at the right of the control page.