Panasonic Projector PT-DZ16KU User Manual

Chapter 4 Settings — [PICTURE] menu
ENGLISH - 71
sRGB-compliant video
sRGB is an international standard (IEC61966-2-1) for color reproduction defined by IEC (International Electrotechnical Commission).
Set according to the following steps to reproduce more faithful, sRGB compliant colors.
1) Set [COLOR MA TCHING] to [OFF].
 fRefer to [COLOR MA TCHING] (x   page   83).
2) Display the [PICTURE] menu.
 fRefer to “[PICTURE] menu” ( x   page   64).
3) Press as to select [PICTURE MODE].
4)  
Press 
 qw to set...

Chapter 4 Settings — [POSITION] menu
72 - ENGLISH
[POSITION] menu
On the menu screen, select [POSITION] from the main menu, and select an item from the sub‑menu.
Refer to “Navigating through the menu” (x
  page   59) for the operation of the menu screen.
 fAfter selecting the item, press 

asqw to adjust.
[SHIFT]
Move the image position vertically or horizontally if the image projected on the screen is still out of position even when the positions of the 
projector and screen are correct.
1) Press  as to...

Chapter 4 Settings — [POSITION] menu
ENGLISH - 73
[VID AUTO]*1The projector identifies the video ID (VID) embedded in the video signals and displays the image by 
automatically switching the screen sizes between 4:3 and 16:9. This function is effective for NTSC 
signals.
[AUTO]
*2The projector identifies the video ID (VID) embedded in the video signals and displays the image by 
automatically switching the screen sizes between 4:3 and 16:9. This function is effective for 480i/480p 
signals.
[THROUGH]...

Chapter 4 Settings — [POSITION] menu
74 - ENGLISH
When [ASPECT] is set to [DEFAULT]
1) Press as to select [ZOOM].
2)  
Press the  button.
 f The  [ZOOM]  screen is displayed.
3) Press  as to select [MODE].
4)  
Press 
 qw to switch the item.
[INTERNAL] Enlarges the size within the aspect range set with [SCREEN FORMA T].
[FULL] Enlarges or reduces the size using the entire display area set with [SCREEN FORMA T].
5) Press as to select [INTERLOCKED].
6)  
Press 
 qw to switch the item.
[OFF] Sets the...

Chapter 4 Settings — [POSITION] menu
ENGLISH - 75
Setting [KEYSTONE] or [CURVED]
1) Press as to select [GEOMETRY].
2)  
Press 
 qw to select [KEYSTONE] or [CURVED].
3)
 
Press the  button.
 f The  [GEOMETRY:KEYSTONE] or [GEOMETRY:CURVED] screen is displayed.
4) Press  as to select the item to adjust.
5)  
Press 
 qw to adjust.
[KEYSTONE]
[LENS THROW RATIO]
Set the throw ratio for the lens used.
[VERTICAL KEYSTONE]
[HORIZONTAL KEYSTONE]
[VERTICAL BALANCE][HORIZONTAL BALANCE]
Adjust the setting according...

Chapter 4 Settings — [POSITION] menu
76 - ENGLISH
Setting [CORNER CORRECTION]
1) Press as to select [GEOMETRY].
2)  
Press 
 qw to select [CORNER CORRECTION].
3)
 
Press the  button.
 f The  [GEOMETRY:CORNER CORRECTION] screen is displayed.
4) Press  as to select the item to adjust, and press the  button.
5)  
Press 
 asqw to adjust.
[CORNER CORRECTION]
[UPPER LEFT]
[UPPER RIGHT][LOWER LEFT][LOWER RIGHT]
[LINEARITY]
Horizontal direction
Vertical direction
Note
 f The menu or logo may run of f the screen...

Chapter 4 Settings — [ADVANCED MENU] menu
ENGLISH - 77
[ADVANCED MENU] menu
On the menu screen, select [ADVANCED MENU] from the main menu, and select an item from 
the sub‑ menu.
Refer to “Navigating through the menu” ( x
  page   59) for the operation of the menu screen.
 fAfter selecting the item, press 

asqw to adjust.
[DIGITAL CINEMA REALITY]
You can increase the vertical resolution and enhance the image quality by performing cinema processing when the PAL (or SECAM) 576i 
signal, the NTSC 480i...

Chapter 4 Settings — [ADVANCED MENU] menu
78 - ENGLISH
Blanking correction Item OperationAdjustmentRange of adjustment
Left side of the  screen [LEFT]Press the w 
button. The blanking zone 
moves to the right.
Left and right 0 - 959
Press the q 
button. The blanking zone 
moves to the left.
Right side of the  screen [RIGHT]Press the q 
button. The blanking zone 
moves to the right.
Press the w 
button. The blanking zone 
moves to the left.
[INPUT RESOLUTION]
You can adjust to achieve an optimal image...

Chapter 4 Settings — [ADVANCED MENU] menu
ENGLISH - 79
[EDGE BLENDING]
The edge blending function allows multiple projector images to be seamlessly overlapped by using the inclination of the brightness at the 
overlapped area.
1) Press as to select [EDGE BLENDING].
2)  
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[OFF] Sets the edge blending function to off.
[ON] Use the setting value preset in the projector for the inclination of the edge blending area.
[USER]...

Chapter 4 Settings — [ADVANCED MENU] menu
80 - ENGLISH
15) Press as to select [UPPER], [LOWER], [LEFT], or [RIGHT] in [BLACK BORDER WIDTH].
16)  
Press 
 qw to set the region (width) of the [BLACK BORDER WIDTH] adjustment.
17)
 
Press 
 as to select [UPPER KEYSTONE AREA], [LOWER KEYSTONE AREA], [LEFT KEYSTONE 
AREA], or [RIGHT KEYSTONE AREA].
18)
 
Press 
 qw to adjust the tilt of the border between [NON ‑ OVERLAPPED BLACK LEVEL] and [BLACK 
BORDER LEVEL].
19)
 
Press 
 as to select [BLACK BORDER...