Panasonic Projector PT-DZ16KU User Manual

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 111
[LOAD ALL USER DATA]
Load the various setting values saved as a backup in the built-in memory of the projector.
1) Press as to select [LOAD ALL USER DATA].
2)  
Press the  button.
 f The  [SECURITY PASSWORD] screen is displayed.
3) Enter a security password and press the  button.
4)  
When the confirmation screen is displayed, press  qw

 to select [OK], and press the  button.
Note
 f The projector enters the standby mode to reflect the setting...

Chapter 4 Settings — [P IN P] menu
112 - ENGLISH
[P IN P] menu
On the menu screen, select [P IN P] from the main menu, and select an item from the sub‑menu.
Refer to “Navigating through the menu” (x
  page   59) for the operation of the menu screen.
 fAfter selecting the item, press 

asqw to set.
Using P IN P function
Locate a separate, small sub screen in the main screen to project two images simultaneously .
1) Press as to select [P IN P MODE].
2)  
Press the  button.
 f The  [P IN P MODE] screen is...

Chapter 4 Settings — [P IN P] menu
ENGLISH - 113
12) If [CLOCK PHASE] is selected in Step 6), press qw  to make adjustment.
13)  
Press 
 as to select [FRAME LOCK].
14)
 
Press 
 qw to switch the item.
[MAIN WINDOW] Set frame lock to the input signal set in the main window.
[SUB WINDOW] Set frame lock to the input signal set in the sub window.
15) Press as to select [TYPE].
16)  
Press 
 qw to switch the item.
[MAIN WINDOW] The main window has display priority.
[SUB WINDOW] The sub window has display...

Chapter 4 Settings — [TEST PATTERN] menu
114 - ENGLISH
[TEST PATTERN] menu
On the menu screen, select [TEST PATTERN] from the main menu.
Refer to “Navigating through the menu” (x
  page   59) for the operation of the menu screen.
 fPress 

qw to switch.
[TEST PATTERN]
Display the test pattern built-in to the projector.
Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before performing various 
adjustments.
1) Press  qw to switch...

Chapter 4 Settings — [SIGNAL LIST] menu
ENGLISH - 115
[SIGNAL LIST] menu
On the menu screen, select [SIGNAL LIST] from the main menu.
Refer to “Navigating through the menu” (x
  page   59) for the operation of the menu screen.
 rRegistered signal details
A1 (1-2)
When the address number (A1, A2, ... L7, L8) signal is registered Sub memory number
Memory number:
 f
A name can be set for each sub memory (x   page   117).
Registering new signals
After a new signal is input and the  button on the remote...

Chapter 4 Settings — [SIGNAL LIST] menu
116 - ENGLISH
 fTo cancel the deletion, press the  button to return to the  [REGISTERED SIGNAL LIST] screen.
3) Press the  button.
 fThe selected signal will be deleted.
Note
 fA registered signal can also be deleted from [ENTRY SIGNAL DELETE] on the [REGISTERED SIGNAL SETUP] screen.
Protecting the registered signal
1) Press  asqw to select the signal to protect.
2)  
Press the  button.
 f The  [REGISTERED SIGNAL STATUS] screen is displayed.
3) Press the  button....

Chapter 4 Settings — [SIGNAL LIST] menu
ENGLISH - 117
Sub memory
The projector has a sub memory function that can register the multiple image adjustment data, even if it is recognized as the same signal by 
the frequency or format of the synchronization signal source.
Use this function when you need to adjust the picture quality such as switching of the aspect ratio or white balance by the same 
synchronization signal source. The sub memory includes all the data that can be adjusted for each signal, such...

Chapter 4 Settings — [SECURITY] menu
118 - ENGLISH
[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an item from the sub‑menu.
Refer to “Navigating through the menu” (x
  page   59) for the operation of the menu screen.
 fWhen the projector is used for the first time
Initial password: Press  awsqawsq in order

, and press the  button.
 fAfter selecting the item, press 

asqw to set.
Attention
 fWhen you select the [SECURITY] menu and press the  button, entering a...

Chapter 4 Settings — [SECURITY] menu
ENGLISH - 119
Note
 fThe entered password is displayed with*marks on the screen. fWhen numerical values are used for the security password, the security password is required to be initialized if the remote control is lost. 
Consult your dealer for the method of initialization.
[DISPLAY SETTING]
Overlap the security message (text or image) over the projecting image.
1) Press  as to select [DISPLAY SETTING].
2)  
Press 
 qw to switch the item.
 fThe items will switch...

Chapter 4 Settings — [SECURITY] menu
120 - ENGLISH
Enabling/disabling any button
1) Press as to select [CONTROL DEVICE SETUP].
2)  
Press the  button.
 f The  [CONTROL DEVICE SETUP] screen is displayed.
3) Press  as to select [CONTROL PANEL] or [REMOTE CONTROL].
4)  
Press the  button.
5)

 
Press 
 as to select [CONTROL PANEL] or [REMOTE CONTROL].
6)
 
Press 
 qw to switch [USER].
7)
 
Press 
 as to select the button item to set.
 fWhen [INPUT  SELECT BUTTON] is selected, press the  button, and then...