Home
>
Panasonic
>
Recording Equipment
>
Panasonic Network Disk Recorder Wj Nd200 Setup Instructions
Panasonic Network Disk Recorder Wj Nd200 Setup Instructions
Here you can view all the pages of manual Panasonic Network Disk Recorder Wj Nd200 Setup Instructions. The Panasonic manuals for Recording Equipment are available online for free. You can easily download all the documents as PDF.
Page 51
![Page 51
Perform the settings of the registered cameras independently
51
Screenshot 1
Click the [Camera] button in the Setup panel and then
click the NW Camera Setup tab. The NW Camera
Setup page will be displayed.
Step 1
The following settings of the registered cameras will be
displayed.
CAM
It is possible to rearrange the order of the cameras.
When it is necessary to rearrange the displayed order of
the cameras after registering the detected cameras
using the [Search] button of Camera Search, select a
number...](http://img.usermanuals.tech/thumb/58/69477/w300_wj-nd200_setup_en_om_d-50.png "Page 51
Perform the settings of the registered cameras independently
51
Screenshot 1
Click the [Camera] button in the Setup panel and then
click the NW Camera Setup tab. The NW Camera
Setup page will be displayed.
Step 1
The following settings of the registered cameras will be
displayed.
CAM
It is possible to rearrange the order of the cameras.
When it is necessary to rearrange the displayed order of
the cameras after registering the detected cameras
using the [Search] button of Camera Search, select a
number...")
Perform the settings of the registered cameras independently 51 Screenshot 1 Click the [Camera] button in the Setup panel and then click the NW Camera Setup tab. The NW Camera Setup page will be displayed. Step 1 The following settings of the registered cameras will be displayed. CAM It is possible to rearrange the order of the cameras. When it is necessary to rearrange the displayed order of the cameras after registering the detected cameras using the [Search] button of Camera Search, select a number...
Page 52
![Page 52
Settings of the title of the camera group [Group Setup]
Set the title of the camera group.
Screenshot 1
Click the [Camera] button in the Setup panel and then
click the Group Setup tab. The Group Setup page
will be displayed.
Step 1
Enter the title of the camera group. Enter up to 16
alphanumeric characters except the following: ! $ % <
= > @ [ ] ^ _ ` { | } ~
Available characters are the same as for the camera
title.
Step 2
Click the [SET] button after completing the settings.
52
Screenshot 2
The...](http://img.usermanuals.tech/thumb/58/69477/w300_wj-nd200_setup_en_om_d-51.png "Page 52
Settings of the title of the camera group [Group Setup]
Set the title of the camera group.
Screenshot 1
Click the [Camera] button in the Setup panel and then
click the Group Setup tab. The Group Setup page
will be displayed.
Step 1
Enter the title of the camera group. Enter up to 16
alphanumeric characters except the following: ! $ % <
= > @ [ ] ^ _ ` { | } ~
Available characters are the same as for the camera
title.
Step 2
Click the [SET] button after completing the settings.
52
Screenshot 2
The...")
Settings of the title of the camera group [Group Setup]
Set the title of the camera group.
Screenshot 1
Click the [Camera] button in the Setup panel and then
click the Group Setup tab. The Group Setup page
will be displayed.
Step 1
Enter the title of the camera group. Enter up to 16
alphanumeric characters except the following: ! $ % <
= > @ [ ] ^ _ ` { | } ~
Available characters are the same as for the camera
title.
Step 2
Click the [SET] button after completing the settings.
52
Screenshot 2
The...
Page 53
![Page 53
53
Settings of the sequential display of images from cameras [Sequence Setup]
Perform the settings for the sequential display of live images.
Screenshot 1
Click the [Camera] button in the Setup panel and then
click the Sequence Setup tab. The Sequence Setup
page will be displayed.
Step 1
Edit the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 2
Click the [SET] button after completing the settings.
[The Method of Sequence]
Select SPOT (single...](http://img.usermanuals.tech/thumb/58/69477/w300_wj-nd200_setup_en_om_d-52.png "Page 53
53
Settings of the sequential display of images from cameras [Sequence Setup]
Perform the settings for the sequential display of live images.
Screenshot 1
Click the [Camera] button in the Setup panel and then
click the Sequence Setup tab. The Sequence Setup
page will be displayed.
Step 1
Edit the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 2
Click the [SET] button after completing the settings.
[The Method of Sequence]
Select SPOT (single...")
53 Settings of the sequential display of images from cameras [Sequence Setup] Perform the settings for the sequential display of live images. Screenshot 1 Click the [Camera] button in the Setup panel and then click the Sequence Setup tab. The Sequence Setup page will be displayed. Step 1 Edit the settings for each item. Refer to the following for further information about the settings for each item. Step 2 Click the [SET] button after completing the settings. [The Method of Sequence] Select SPOT (single...
Page 54
![Page 54
54
Camera groups can be set on the Monitor Display
page (System – Basic Setup – Monitor Display
(page 30).
[PRESET]
Enter the preset position to where the camera is to be
moved at each step. (Only for SPOT Live Sequence)
Enter 1 – 256 for PRESET.
When no number is entered (blank), the camera will not
move at the respective step.
[DWELL]
Select a dwell time to go to the next sequential step
from the following.
2 s/3 s/5 s/10 s/20 s](http://img.usermanuals.tech/thumb/58/69477/w300_wj-nd200_setup_en_om_d-53.png "Page 54
54
Camera groups can be set on the Monitor Display
page (System – Basic Setup – Monitor Display
(page 30).
[PRESET]
Enter the preset position to where the camera is to be
moved at each step. (Only for SPOT Live Sequence)
Enter 1 – 256 for PRESET.
When no number is entered (blank), the camera will not
move at the respective step.
[DWELL]
Select a dwell time to go to the next sequential step
from the following.
2 s/3 s/5 s/10 s/20 s")
54 Camera groups can be set on the Monitor Display page (System – Basic Setup – Monitor Display (page 30). [PRESET] Enter the preset position to where the camera is to be moved at each step. (Only for SPOT Live Sequence) Enter 1 – 256 for PRESET. When no number is entered (blank), the camera will not move at the respective step. [DWELL] Select a dwell time to go to the next sequential step from the following. 2 s/3 s/5 s/10 s/20 s
Page 55
![Page 55
55
Settings relating to network [Comm]
Perform the settings for a network connection such as settings of the IP address and gateway address.
Basic settings for a network [Basic Setup]
Basic network settings can be configured with this menu.
Screenshot 1
Click the [Comm] button in the Setup panel and then
click the Basic Setup tab. The Basic Setup page will
be displayed.
Step 1
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 2
Click...](http://img.usermanuals.tech/thumb/58/69477/w300_wj-nd200_setup_en_om_d-54.png "Page 55
55
Settings relating to network [Comm]
Perform the settings for a network connection such as settings of the IP address and gateway address.
Basic settings for a network [Basic Setup]
Basic network settings can be configured with this menu.
Screenshot 1
Click the [Comm] button in the Setup panel and then
click the Basic Setup tab. The Basic Setup page will
be displayed.
Step 1
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 2
Click...")
55 Settings relating to network [Comm] Perform the settings for a network connection such as settings of the IP address and gateway address. Basic settings for a network [Basic Setup] Basic network settings can be configured with this menu. Screenshot 1 Click the [Comm] button in the Setup panel and then click the Basic Setup tab. The Basic Setup page will be displayed. Step 1 Perform the settings for each item. Refer to the following for further information about the settings for each item. Step 2 Click...
Page 56
![Page 56
56
FTP Port Number
Specify the FTP port number to be used.
Note:
The following port numbers and the port numbers
used for the HTTP port and for the site alarm setting
are unavailable for the FTP port number.
20, 23, 25, 42, 53, 67, 68, 69, 79, 80, 105, 110, 123,
161, 162, 546, 547, 995, 10001, 10002, 10003,
10004, 10005, 10006, 10007
Port Setup
Perform the settings for the following items for each
port.
[DHCP]
Select ON or OFF to determine whether or not to use
the DHCP server. Select ON to obtain an...](http://img.usermanuals.tech/thumb/58/69477/w300_wj-nd200_setup_en_om_d-55.png "Page 56
56
FTP Port Number
Specify the FTP port number to be used.
Note:
The following port numbers and the port numbers
used for the HTTP port and for the site alarm setting
are unavailable for the FTP port number.
20, 23, 25, 42, 53, 67, 68, 69, 79, 80, 105, 110, 123,
161, 162, 546, 547, 995, 10001, 10002, 10003,
10004, 10005, 10006, 10007
Port Setup
Perform the settings for the following items for each
port.
[DHCP]
Select ON or OFF to determine whether or not to use
the DHCP server. Select ON to obtain an...")
56 FTP Port Number Specify the FTP port number to be used. Note: The following port numbers and the port numbers used for the HTTP port and for the site alarm setting are unavailable for the FTP port number. 20, 23, 25, 42, 53, 67, 68, 69, 79, 80, 105, 110, 123, 161, 162, 546, 547, 995, 10001, 10002, 10003, 10004, 10005, 10006, 10007 Port Setup Perform the settings for the following items for each port. [DHCP] Select ON or OFF to determine whether or not to use the DHCP server. Select ON to obtain an...
Page 57
![Page 57
57
Basic network settings relating to DDNS [DDNS Setup]
Perform the basic settings of network DDNS.
Screenshot 1
Click the [Comm] button in the Setup panel and then
click the DDNS Setup tab. The DDNS Setup page
will be displayed.
Step 1
Perform the following setup items.
DDNS
Select ON or OFF to determine whether or not to use
the DDNS (Dynamic Domain Name Server).
When ON is selected, perform the following settings.
Default:OFF
User Name
Enter a user name registered in the DDNS.
Enter up to 32...](http://img.usermanuals.tech/thumb/58/69477/w300_wj-nd200_setup_en_om_d-56.png "Page 57
57
Basic network settings relating to DDNS [DDNS Setup]
Perform the basic settings of network DDNS.
Screenshot 1
Click the [Comm] button in the Setup panel and then
click the DDNS Setup tab. The DDNS Setup page
will be displayed.
Step 1
Perform the following setup items.
DDNS
Select ON or OFF to determine whether or not to use
the DDNS (Dynamic Domain Name Server).
When ON is selected, perform the following settings.
Default:OFF
User Name
Enter a user name registered in the DDNS.
Enter up to 32...")
57 Basic network settings relating to DDNS [DDNS Setup] Perform the basic settings of network DDNS. Screenshot 1 Click the [Comm] button in the Setup panel and then click the DDNS Setup tab. The DDNS Setup page will be displayed. Step 1 Perform the following setup items. DDNS Select ON or OFF to determine whether or not to use the DDNS (Dynamic Domain Name Server). When ON is selected, perform the following settings. Default:OFF User Name Enter a user name registered in the DDNS. Enter up to 32...
Page 58
![Page 58
58
Basic settings relating to the proxy server [Proxy Setup]
Basic network proxy settings can be performed with this menu.
Screenshot 1
Click the [Comm] button in the Setup panel and then
click the Proxy Setup tab. The Proxy Setup page will
be displayed.
Step 1
Perform the following setup items.
Proxy Setup Use
Select ON or OFF to determine whether or not to use
the proxy server.
When ON is selected, perform the following settings.
Server Address
Enter a proxy server address. Enter up to 255 alphanu-...](http://img.usermanuals.tech/thumb/58/69477/w300_wj-nd200_setup_en_om_d-57.png "Page 58
58
Basic settings relating to the proxy server [Proxy Setup]
Basic network proxy settings can be performed with this menu.
Screenshot 1
Click the [Comm] button in the Setup panel and then
click the Proxy Setup tab. The Proxy Setup page will
be displayed.
Step 1
Perform the following setup items.
Proxy Setup Use
Select ON or OFF to determine whether or not to use
the proxy server.
When ON is selected, perform the following settings.
Server Address
Enter a proxy server address. Enter up to 255 alphanu-...")
58 Basic settings relating to the proxy server [Proxy Setup] Basic network proxy settings can be performed with this menu. Screenshot 1 Click the [Comm] button in the Setup panel and then click the Proxy Setup tab. The Proxy Setup page will be displayed. Step 1 Perform the following setup items. Proxy Setup Use Select ON or OFF to determine whether or not to use the proxy server. When ON is selected, perform the following settings. Server Address Enter a proxy server address. Enter up to 255 alphanu-...
Page 59
![Page 59
59
Settings for SNMP network [SNMP Setup]
Perform the settings for the SNMP. Perform the settings for the status check of the unit, etc. by connecting the
SNMP manager.
Screenshot 1
Click the [Comm] button in the Setup panel and then
click the SNMP Setup tab. The SNMP Setup page
will be displayed.
Step 1
Perform the following setup items.
COMMUNITY
Enter a name used for SNMP authentication in alphanu-
meric characters. Enter up to 32 characters using
alphanumeric characters and the following marks....](http://img.usermanuals.tech/thumb/58/69477/w300_wj-nd200_setup_en_om_d-58.png "Page 59
59
Settings for SNMP network [SNMP Setup]
Perform the settings for the SNMP. Perform the settings for the status check of the unit, etc. by connecting the
SNMP manager.
Screenshot 1
Click the [Comm] button in the Setup panel and then
click the SNMP Setup tab. The SNMP Setup page
will be displayed.
Step 1
Perform the following setup items.
COMMUNITY
Enter a name used for SNMP authentication in alphanu-
meric characters. Enter up to 32 characters using
alphanumeric characters and the following marks....")
59 Settings for SNMP network [SNMP Setup] Perform the settings for the SNMP. Perform the settings for the status check of the unit, etc. by connecting the SNMP manager. Screenshot 1 Click the [Comm] button in the Setup panel and then click the SNMP Setup tab. The SNMP Setup page will be displayed. Step 1 Perform the following setup items. COMMUNITY Enter a name used for SNMP authentication in alphanu- meric characters. Enter up to 32 characters using alphanumeric characters and the following marks....
Page 60
![Page 60
60
Settings for the time adjustment of a network [NTP Setup]
Screenshot 1
Click the [Comm] button in the Setup panel and then
click the NTP Setup tab. The NTP Setup page will be
displayed.
Step 1
Perform the following setup items.
Time Adjustment
Select ON or OFF to determine whether or not to
adjust the time according to the NTP server.
Default:OFF
NTP Server Address
Enter the NTP server address when adjusting the time
using the NTP server. Enter up to 255 alphanumeric
characters including hyphens (-)...](http://img.usermanuals.tech/thumb/58/69477/w300_wj-nd200_setup_en_om_d-59.png "Page 60
60
Settings for the time adjustment of a network [NTP Setup]
Screenshot 1
Click the [Comm] button in the Setup panel and then
click the NTP Setup tab. The NTP Setup page will be
displayed.
Step 1
Perform the following setup items.
Time Adjustment
Select ON or OFF to determine whether or not to
adjust the time according to the NTP server.
Default:OFF
NTP Server Address
Enter the NTP server address when adjusting the time
using the NTP server. Enter up to 255 alphanumeric
characters including hyphens (-)...")
60 Settings for the time adjustment of a network [NTP Setup] Screenshot 1 Click the [Comm] button in the Setup panel and then click the NTP Setup tab. The NTP Setup page will be displayed. Step 1 Perform the following setup items. Time Adjustment Select ON or OFF to determine whether or not to adjust the time according to the NTP server. Default:OFF NTP Server Address Enter the NTP server address when adjusting the time using the NTP server. Enter up to 255 alphanumeric characters including hyphens (-)...