Panasonic Network Disk Recorder Wj Nd200 Setup Instructions

Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
Network Disk Recorder
Setup Instructions 
Model No. WJ-ND200
Network Disk Recorder WJ-ND200
ERROR
REC
OPERATETIMERALARM
ALARM
SUSPENDBUZZER
STOPLINK
/ACT
MIRROR
HDD1
HDD2 

2
CONTENTS
Preface ............................................................................................................................ 3
Features ......................................................................................................................3
About these operating instructions  .............................................................................. 4
System requirements for a PC  .................................................................................... 4...

3
Preface
Features
The Network Disk Recorders WJ-ND200 are designed for use within a surveillance system, and perform recordings
and playbacks pictures from network cameras in the system.
The network disk recorder is a recording device using a hard disk drive to record camera pictures instead of using
video tapes so that pictures recorded by repeated overwriting will not experience deterioration of the recorded pic-
ture quality.
Up to 16 cameras can be connected via a network and it is possible to...

4
Security Function and Reliability
• User authentication function (registration of ID and password) allows users access to predetermined selection of
the available functions. Up to 32 users can be registered.
• Host authentication function restricts devices from operating this unit if their IP addresses are not registered.
• If a hard disk crashes, the mirroring function prevents any recorded pictures loss by continuing recording on the
another hard disk.
About these operating instructions
There are 3...

5
Note:
When using a PC that does not meet the above requirements, displaying of images may become slow or the web
browser may become inoperable.
Trademarks and registered trademarks
• Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United
States and/or other countries.
• Microsoft, Windows, Internet Explorer, and DirectX are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
• Other names...

6
Manual recording
Function for starting and stopping recording manually by clicking the recording button or recording stop button.
Schedule recording
Function for starting and stopping recording automatically at a preset time.
Event recording
Function for starting recording automatically when an event occurs. Event recordings are divided into pre recordings
(pictures before the event occurs) and post recordings (pictures after the event occurs).
Emergency recording
Function for performing priority...

7
Operations Flow
Connections
Refer to the provided Installation Guide for further infor-
mation about connections.
➜
z
Startup
Turn on the power of the unit.
For further information, refer to the Installation Guide.
➜
x
Network settings of the PC
(page 8)Change the TCP/IP setting of the PC to conform to the
settings of this unit.
➜
c
Format (initialize) hard disk drives
(page 76)Display the disk configuration menu and format the
hard disk drives.
➜
v
Display the camera setup menu and
perform the network...

8
Performing the Network Settings of a PC
Change the TCP/IP setting of the PC to conform to the settings of this unit.
It is required to set the IP address of the PC to 192.168.0.XX (a number from 2 to -254 except 250) to access this
unit.
With the following network environment, it is not necessary to perform the network settings. It is possible to perform
the settings or operate this unit using a web browser after completing the connection.
IP Address: 192.168.0.2 - 192.168.0.249, 192.168.0.251 -...

9
Screenshot 3
The Network and Internet Connections window will be
displayed.
Step 3
Click Network Connections.
Screenshot 4
The Network Connections window will be displayed.
Step 4
Double click Local Area Connection.
Screenshot 5
The Local Area Connection Status window will be dis-
played.
Step 5
Click Properties. 

10
Screenshot 6
The Local Area Connection Properties window will be
displayed.
Step 6
Click Internet Protocol (TCP/IP), and then click
Properties.
Screenshot 7
The Properties window of Internet Protocol (TCP/IP)
will be displayed.
Step 7
Click Use the following IP address and enter the IP
address and the subnet mask as follows;
• IP address: 192.168.0.100
• Subnet mask: 255.255.255.0
Depending on the network configuration, it may be nec-
essary to set the Default gateway. Refer to a system
administrator...