Panasonic Network Disk Recorder Wj Nd200 Setup Instructions

11
Equipped security functions
qAccess restrictions by the host authentication and the user authentication
It is possible to restrict users from accessing this unit by setting the host authentication and/or the user authenti-
cation to on. (page 65)
wAccess restrictions by changing the HTTP port
It is possible to prevent illegal access such as port scanning, etc. by changing the HTTP port number. 
(page 55)
For enhanced security
Divide the subnet using a router to enhance the network security by double...

12
Display the Operation Window
To display the operation window to operate the unit from the web browser installed on the PC, proceed as follows.
Screenshot 1
Start just after the PC is started up.
Step 1
After the browser starts, enter the IP address set to this
unit in the address box, and press the enter key.
Important:
•Refer to a system administrator for the IP address.
•It is impossible to access this unit from a PC without
a registered IP address when ON is selected for
Host Authentication on the...

13
Screenshot 3
The top page will be displayed.
Step 3
Click the buttons or the tabs for operations.
Important:
If a message is displayed on the information bar,
see page 83.
Notes:
•When the top page is displayed for the first time, the
install wizard of the ActiveX control required to dis-
play images from the camera will be displayed.
Follow the instructions of the wizard.
•When the install wizard is displayed again even after
completing the installation of the ActiveX, restart the
PC.
Important:
When...

14
About the Operation Window
[Control] button [Cam Select] button
[Setup] buttonStatus display areaCurrent time display area
Playback image
display area
Time and date of the
displayed image
Playback point
operation area
[HDD] tab
[CAM] tab
Camera title
Top page
[Control] button (page 15)
Clicking this button displays the Control panel that is
used for performing operations such as searching for
recorded pictures on the HDD and playing recorded pic-
tures. From the Control panel, you can also perform...

15
[Control] button
When the [Control] button is clicked, the Control panel will be displayed.
[Multiscreen Select] box
Up to 4 camera images can be displayed simultaneous-
ly on a 4-Screen.
Each time the button is clicked, the camera picture is
changed to quad display according to the settings made
in the Monitor Display page (System – Basic Setup
– Monitor Display).Control panel[Sequence] box
Camera images to be displayed will be switched by
clicking this button. Camera images will be displayed...

16
[Cam Select] button
When the [Cam Select] button is clicked, the Cam Select panel will be displayed.
[Multiscreen Select] box
Multiscreen button:
Up to 4 camera images can be displayed simultaneous-
ly on a 4-Screen.
Each time the button is clicked, the camera picture is
changed to quad display according to the settings made
in the Monitor Display page (System – Basic Setup
– Monitor Display).
[Sequence] box
Sequence button:
Camera images to be displayed will be switched by
clicking this button....

17
[Setup] button
When the [Setup] button is clicked, the Setup panel will be displayed.
[Emergency REC] button
The setup menu for the emergency recording will be
displayed. Perform the settings for emergency record-
ing. Refer to page 34 for further information.
[Event] button
Displays the setting menu for event actions of each
event type (site alarm and terminal alarm). Refer to
page 36 for further information.
[Schedule] button
The menu for the settings of the recording schedule
(performs...

18
Status display area
wer
q
qThe status of live/playback image will be
displayed.
[LIVE]:
Indicates that a live image is being displayed.
[Playback]:
Indicates that a playback image is being dis-
played.
[Reverse playback]:
Indicates that a reverse playback image is being
displayed.
[Fast playback]:
Indicates that a fast playback image is being dis-
played.
[Fast reverse playback]:
Indicates that a fast reverse playback image is
being displayed.
[Pause]:
Indicates that a paused image is being dis-...

19
qIndicates the start time and the end time of a down-
load. (Refer to the operating instructions (PDF).)
[Start] button
Set the start time for the time and date of the
image to be downloaded.
[End] button
Set the end time for the time and date of the
image to be downloaded.w[GO TO DATE] button
Indicates the time and date of a marked point. Use
this button to designate the desired time and date of
a recorded image to be played. (Refer to the operat-
ing instructions (PDF).)
e[GO TO LAST] button
Skips...

20
[FF] button
Fast playback will be performed. Playback speed for
fast playback will be changed in the following order
each time this button is clicked: Step2 (Approx. 4x) →
Step3 (Approx. 8x) →Step4 (Approx. 16x) →
Step5 (Approx. 32x) →Step6 (Approx. 48x) →
Step7 (Approx. 96x)
[PREV IMAGE] button
The previous frame will be displayed when this button is
clicked during playback/pausing.
[PAUSE] button
Playback will be stopped when this button is clicked dur-
ing playback. Playback will be resumed when...