Panasonic Network Disk Recorder Wj Nd200 Setup Instructions

61
Settings for the FTP server [FTP Setup]
Settings for transmitting images from a camera connected to this unit to a designated FTP server periodically can be
performed with the FTP Setup menu.
Screenshot 1
Click the [Comm] button in the Setup panel and then
click the FTP Setup tab. The FTP Setup page will be
displayed.
Step 1
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 2
Click the [SET] button after completing the settings....

62
Channel to Send
Select a camera channel from which images will be sent
periodically. Images from the checked camera channel
will be sent to the FTP server.
Note:
When the image compression method of the camera
selected for a camera channel is MPEG-4, the
image will not be sent.
[FTP Send by Alarm]
Perform the following settings to send images recorded
in the location where an alarm occurred. Perform the
settings to determine whether or not to send images
recorded in the location where an alarm...

63
Settings for mail notification [Mail Setup]
Perform the settings relating to the alarm mail function and the warning report mail function (refer to the Operating
Instructions (PDF)).
Screenshot 1
Click the [Comm] button in the Setup panel and then
click the Mail Setup tab. The Mail Setup page will be
displayed.
Step 1
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 2
Click the [SET] button after completing the settings.
Setup...

64
Send to
Enter the mail addresses of the recipient of the alarm
mail and the warning report mail. Enter the mail
addresses of the recipients for Address1 - Address4.
Enter up to 255 alphanumeric characters including
hyphens (-), periods (.) and at mark (@).
Up to 4 destinations can be registered.
Check the desired mail type (warning/alarm) to be sent.From Address
Enter the mail address of a sender. Entered mail
addresses will be displayed in the From (sender) line.
Enter up to 127 alphanumeric...

65
Settings relating to the authentication [User Mng.]
Perform the settings for the user authentication/host authentication to restrict access this unit from PCs. It is possible
to restrict access this unit from users/hosts (PCs) by registering users and hosts (PCs) who can access this unit in
advance when ON is selected for the user authentication and the host authentication.
Settings to enable/disable the user authentication/host authentication [Basic Setup]
Select ON or OFF to determine whether or not...

66
Edit information of the registered administrator [Administrator Setup]
It is possible to edit the registered administrator information such as the password, default screen, etc.
Screenshot 1
Click the [User Mng.] button in the Setup panel and
then click the Administrator Setup tab. The
Administrator Setup page will be displayed.
Step 1
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 2
Click the [SET] button after completing the...

67
Setup items
USER ID
Enter a user ID. Enter 4 to 14 alphanumeric characters
for user ID. Up to 32 users can be registered.
Password
Enter a password. Enter 4 to 8 alphanumeric characters
for a password.
Note:
Set a unique password, not something that would be
easily guessed by a third person. The password also
should be memorable.
Level
Select a user level from the following. Operable func-
tions for each level can be set in the User Level menu
(page 70).
LV1/LV2/LV3/LV4Priority
Perform the...

68
SEQ:Images will be displayed in the sequential display.
The operational settings of the sequential display
can be performed on the Sequence Setup window
(Camera - Sequence Setup).
Camera Partitioning
Select a controllable range for each camera channel
from the following.
View/Operate:Both displaying live/recorded images
and controlling cameras are possible.
View:Displaying live/recorded images is possible.
Controlling cameras is impossible.
--:Neither displaying live/recorded images nor control-
ling...

69
Setup items
Host IP Address
Enter an IP address. Enter 4 units from the decimal
numbers (0-254).
Notes:
•Entering * validates all numbers.
•It is impossible to register 0.0.0.0 or *.*.*.*.
Level
Select a user level from the following. Operable func-
tions for each level can be set in the User Level menu
(page 70).
LV1/LV2/LV3/LV4
Priority
Assign a priority from 1 (lowest priority) to 16 (highest
priority) to every host.
Default Screen
Select a startup display to be displayed after login from
the...

70
Setting of operation level [User Level]
Assign a level (LV1/LV2/LV3/LV4) to every user to restrict operable functions.
Screenshot 1
Click the [User Mng.] button in the Setup panel and
then click the User Level tab. The User Level page
will be displayed.
Step 1
Check the desired functions that a user may operate. To
stop a user from operating certain functions, do not
check the respective function.
Refer to page 71 for further information about each
function.
Step 2
Click the [SET] button after...