Home
>
Panasonic
>
Recording Equipment
>
Panasonic Network Disk Recorder Wj Nd200 Setup Instructions
Panasonic Network Disk Recorder Wj Nd200 Setup Instructions
Here you can view all the pages of manual Panasonic Network Disk Recorder Wj Nd200 Setup Instructions. The Panasonic manuals for Recording Equipment are available online for free. You can easily download all the documents as PDF.
Page 41
41 Note: When MANUAL is selected for DURATION (recording duration), recording will be performed for at least 8 seconds at an event occurrence as long as the alarm is not canceled. Important: •Depending on the network traffic or environment, images will not be recorded as configured (by setting the pre-event recording rate and the recording dura- tion). •It is recommended to set the refresh interval of the camera to 1 second or 4 seconds when selecting MPEG-4 for the image compression method. When a...
Page 42
42 About the SD memory recording The SD memory recording is the function of some Panasonic’s cameras that saves images on the SD memory card on the camera when communication with the camera failed in the period set for the schedule recording of this unit. Applicable cameras/firmware versions •WV-NP244 series: Ver.1.20 or later •WV-NP1000 series: Ver.1.20 or later •WV-NS202: Ver.1.00 or later •WV-NF284: Ver1.00 or later •WJ-NT304: Ver1.00 or later •WV-NW484: Ver1.00 or later For example, when 0.1 ips is...
Page 43
![Page 43
43
Notes:
•Click the [Measurement] button after setting the recording rate/transmission rate by clicking the [SET] button.
•Do not change the settings in the process of the measurement.
•In the process of the measurement, recording, playback and live image display will stop. Other users currently
accessing the unit will forcibly be logged out.
•They need to log in the unit after the measurement. The result value is the reference value.
•Depending on the network traffic, different result value may be...](http://img.usermanuals.tech/thumb/58/69477/w300_wj-nd200_setup_en_om_d-42.png "Page 43
43
Notes:
•Click the [Measurement] button after setting the recording rate/transmission rate by clicking the [SET] button.
•Do not change the settings in the process of the measurement.
•In the process of the measurement, recording, playback and live image display will stop. Other users currently
accessing the unit will forcibly be logged out.
•They need to log in the unit after the measurement. The result value is the reference value.
•Depending on the network traffic, different result value may be...")
43 Notes: •Click the [Measurement] button after setting the recording rate/transmission rate by clicking the [SET] button. •Do not change the settings in the process of the measurement. •In the process of the measurement, recording, playback and live image display will stop. Other users currently accessing the unit will forcibly be logged out. •They need to log in the unit after the measurement. The result value is the reference value. •Depending on the network traffic, different result value may be...
Page 44
![Page 44
44
Set the time zone and assign programs [Time Table]
Create timetables for each day of the week, and assign a program to each timetable. Up to 6 recording programs
can be created for each day of the week.
Screenshot 1
Click the [Schedule] button in the Setup panel and
then click the Time Table tab. The Time Table page
will be displayed.
Step 1
Click the button of the desired day of the week.
Notes:
•When a signal is supplied from the ALARM/CON-
TROL connector on the rear panel (the external
recording...](http://img.usermanuals.tech/thumb/58/69477/w300_wj-nd200_setup_en_om_d-43.png "Page 44
44
Set the time zone and assign programs [Time Table]
Create timetables for each day of the week, and assign a program to each timetable. Up to 6 recording programs
can be created for each day of the week.
Screenshot 1
Click the [Schedule] button in the Setup panel and
then click the Time Table tab. The Time Table page
will be displayed.
Step 1
Click the button of the desired day of the week.
Notes:
•When a signal is supplied from the ALARM/CON-
TROL connector on the rear panel (the external
recording...")
44 Set the time zone and assign programs [Time Table] Create timetables for each day of the week, and assign a program to each timetable. Up to 6 recording programs can be created for each day of the week. Screenshot 1 Click the [Schedule] button in the Setup panel and then click the Time Table tab. The Time Table page will be displayed. Step 1 Click the button of the desired day of the week. Notes: •When a signal is supplied from the ALARM/CON- TROL connector on the rear panel (the external recording...
Page 45
![Page 45
45
Setup items
Copy the other Time Table
When it is necessary to copy the timetable of another
day of the week, select the desired day of the week and
click the [Copy] button.
Program Setup
The program can be edited on the program setting win-
dow displayed by clicking the [View] button after select-
ing a program from the pull-down.
PERIOD
Perform the following settings for each time zone.
[START]
Set the start time for the selected time zone.
[END]
Set the end time for the selected time zone....](http://img.usermanuals.tech/thumb/58/69477/w300_wj-nd200_setup_en_om_d-44.png "Page 45
45
Setup items
Copy the other Time Table
When it is necessary to copy the timetable of another
day of the week, select the desired day of the week and
click the [Copy] button.
Program Setup
The program can be edited on the program setting win-
dow displayed by clicking the [View] button after select-
ing a program from the pull-down.
PERIOD
Perform the following settings for each time zone.
[START]
Set the start time for the selected time zone.
[END]
Set the end time for the selected time zone....")
45 Setup items Copy the other Time Table When it is necessary to copy the timetable of another day of the week, select the desired day of the week and click the [Copy] button. Program Setup The program can be edited on the program setting win- dow displayed by clicking the [View] button after select- ing a program from the pull-down. PERIOD Perform the following settings for each time zone. [START] Set the start time for the selected time zone. [END] Set the end time for the selected time zone....
Page 46
![Page 46
46
Perform the settings of timetable for special days [Special Days]
Assign timetables to special days aside from other days of the week. Timetables for special days can be set for up to
30 days.
Perform the settings to specify dates as special days and apply the timetable of the day of the week to the specified
special days.
Screenshot 1
Click the [Schedule] button in the Setup panel and
then click the Special Days tab. The Special Days
page will be displayed.
Step 1
Click the [i] button and select date...](http://img.usermanuals.tech/thumb/58/69477/w300_wj-nd200_setup_en_om_d-45.png "Page 46
46
Perform the settings of timetable for special days [Special Days]
Assign timetables to special days aside from other days of the week. Timetables for special days can be set for up to
30 days.
Perform the settings to specify dates as special days and apply the timetable of the day of the week to the specified
special days.
Screenshot 1
Click the [Schedule] button in the Setup panel and
then click the Special Days tab. The Special Days
page will be displayed.
Step 1
Click the [i] button and select date...")
46 Perform the settings of timetable for special days [Special Days] Assign timetables to special days aside from other days of the week. Timetables for special days can be set for up to 30 days. Perform the settings to specify dates as special days and apply the timetable of the day of the week to the specified special days. Screenshot 1 Click the [Schedule] button in the Setup panel and then click the Special Days tab. The Special Days page will be displayed. Step 1 Click the [i] button and select date...
Page 47
![Page 47
47
Settings relating to cameras [Camera]
Perform the setting relating to the network such as the IP address of the cameras, port numbers, etc., the settings of
the group and the settings of the sequential display.
Perform the settings for network connection [NW Camera Setup]
Perform the network camera settings such as the camera IP address and the port number.
The settings are configured differently between when automatically detecting and registering the IP addresses of the
cameras and when registering...](http://img.usermanuals.tech/thumb/58/69477/w300_wj-nd200_setup_en_om_d-46.png "Page 47
47
Settings relating to cameras [Camera]
Perform the setting relating to the network such as the IP address of the cameras, port numbers, etc., the settings of
the group and the settings of the sequential display.
Perform the settings for network connection [NW Camera Setup]
Perform the network camera settings such as the camera IP address and the port number.
The settings are configured differently between when automatically detecting and registering the IP addresses of the
cameras and when registering...")
47 Settings relating to cameras [Camera] Perform the setting relating to the network such as the IP address of the cameras, port numbers, etc., the settings of the group and the settings of the sequential display. Perform the settings for network connection [NW Camera Setup] Perform the network camera settings such as the camera IP address and the port number. The settings are configured differently between when automatically detecting and registering the IP addresses of the cameras and when registering...
Page 48
![Page 48
Setup items
Camera Search
Click the [Search] button to search cameras again.
[MODEL]
The model number of the detected camera will be dis-
played.
[MAC Address]
The MAC address of the detected camera will be dis-
played.
[IP Address]
The IP address of the detected camera will be dis-
played.
[New IP Address]
Enter an IP address to be given to the detected camera.
[DHCP]
The DHCP setting of the detected camera will be dis-
played. (The displayed DHCP setting can be edited.)
IP Address Set
Check the...](http://img.usermanuals.tech/thumb/58/69477/w300_wj-nd200_setup_en_om_d-47.png "Page 48
Setup items
Camera Search
Click the [Search] button to search cameras again.
[MODEL]
The model number of the detected camera will be dis-
played.
[MAC Address]
The MAC address of the detected camera will be dis-
played.
[IP Address]
The IP address of the detected camera will be dis-
played.
[New IP Address]
Enter an IP address to be given to the detected camera.
[DHCP]
The DHCP setting of the detected camera will be dis-
played. (The displayed DHCP setting can be edited.)
IP Address Set
Check the...")
Setup items Camera Search Click the [Search] button to search cameras again. [MODEL] The model number of the detected camera will be dis- played. [MAC Address] The MAC address of the detected camera will be dis- played. [IP Address] The IP address of the detected camera will be dis- played. [New IP Address] Enter an IP address to be given to the detected camera. [DHCP] The DHCP setting of the detected camera will be dis- played. (The displayed DHCP setting can be edited.) IP Address Set Check the...
Page 49
![Page 49
49
Register the IP addresses of the cameras manually
Screenshot 1
Click the [Camera] button in the Setup panel and then
click the NW Camera Setup tab. The NW Camera
Setup page will be displayed.
Step 1
Click the [Setup] button of Network Camera
Registration.
•When the [Execute] button of Start IP Address is
clicked, the unit will automatically find an unused IP
address and set it to the detected camera. However,
depending on the network environment, the set IP
address may be already used for the other...](http://img.usermanuals.tech/thumb/58/69477/w300_wj-nd200_setup_en_om_d-48.png "Page 49
49
Register the IP addresses of the cameras manually
Screenshot 1
Click the [Camera] button in the Setup panel and then
click the NW Camera Setup tab. The NW Camera
Setup page will be displayed.
Step 1
Click the [Setup] button of Network Camera
Registration.
•When the [Execute] button of Start IP Address is
clicked, the unit will automatically find an unused IP
address and set it to the detected camera. However,
depending on the network environment, the set IP
address may be already used for the other...")
49 Register the IP addresses of the cameras manually Screenshot 1 Click the [Camera] button in the Setup panel and then click the NW Camera Setup tab. The NW Camera Setup page will be displayed. Step 1 Click the [Setup] button of Network Camera Registration. •When the [Execute] button of Start IP Address is clicked, the unit will automatically find an unused IP address and set it to the detected camera. However, depending on the network environment, the set IP address may be already used for the other...
Page 50
![Page 50
50
Setup items
[Manufacturer]
Select the manufacturer of the camera.
[MODEL/COMPRESSION]
Select a camera number and image compression
method.
Note:
When the [SET] button is clicked after changing only
the compression method, the set recording rate/
transmission rate will be automatically changed as
follows.
When changed from MPEG-4 to JPEG or M-
JPEG, they will be 1 ips.
When changed from JPEG or M-JPEG to
MPEG-4, they will be I-Frame.
[ADDRESS]
Enter the IP address to be given to the camera. Enter
up to...](http://img.usermanuals.tech/thumb/58/69477/w300_wj-nd200_setup_en_om_d-49.png "Page 50
50
Setup items
[Manufacturer]
Select the manufacturer of the camera.
[MODEL/COMPRESSION]
Select a camera number and image compression
method.
Note:
When the [SET] button is clicked after changing only
the compression method, the set recording rate/
transmission rate will be automatically changed as
follows.
When changed from MPEG-4 to JPEG or M-
JPEG, they will be 1 ips.
When changed from JPEG or M-JPEG to
MPEG-4, they will be I-Frame.
[ADDRESS]
Enter the IP address to be given to the camera. Enter
up to...")
50 Setup items [Manufacturer] Select the manufacturer of the camera. [MODEL/COMPRESSION] Select a camera number and image compression method. Note: When the [SET] button is clicked after changing only the compression method, the set recording rate/ transmission rate will be automatically changed as follows. When changed from MPEG-4 to JPEG or M- JPEG, they will be 1 ips. When changed from JPEG or M-JPEG to MPEG-4, they will be I-Frame. [ADDRESS] Enter the IP address to be given to the camera. Enter up to...